BS EN 61987-14-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equi.pdf

《BS EN 61987-14-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equi.pdf》由会员分享，可在线阅读，更多相关《BS EN 61987-14-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equi.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、Industrial-process measurementand control Data structures and elements in process equipment cataloguesPart 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchangeBS EN 61987-14:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:0

2、6National forewordThis British Standard is the UK implementation of EN 61987-14:2016. It isidentical to IEC 61987-14:2016.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organ

3、izations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016I

4、SBN 978 0 580 89223 3ICS 25.040.40; 35.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicationDate Text a

5、ffectedBRITISH STANDARDBS EN 61987-14:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61987-14 July 2016 ICS 25.040.40; 35.100.20 English Version Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) fo

6、r temperature measuring equipment for electronic data exchange (IEC 61987-14:2016) Mesure et commande dans les processus industriels - Structures de donnes et lments dans les catalogues dquipement de processus - Partie 14: Liste de proprits (LOP) des quipements de mesure de temprature pour lchange l

7、ectronique de donnes (IEC 61987-14:2016) Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 14: Merkmalleisten (ML) fr Temperaturmessgerte fr den elektronischen Datenaustausch (IEC 61987-14:2016) This European Standard was approved by CENELEC on 2016-

8、05-31. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob

9、tained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

10、 to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gree

11、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electr

12、otechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61987-14:2016 E BS EN 61987-14:2016EN 61987-14:2016 2

13、European foreword The text of document 65E/458/CDV, future edition 1 of IEC 61987-14, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN

14、 61987-14:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-02-28 latest date by which the national standards conflicting with the document have to be withdrawn

15、(dow) 2019-05-31 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61987-1

16、4:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60079-0:2011 NOTE Harmonized as EN 60079-0:2012 (modified). IEC 60947-5-6:1999 NOTE Harmonized as EN 60947-

17、5-6:2000 (not modified). IEC 61298-1:2008 NOTE Harmonized as EN 61298-1:2008 (not modified). IEC 61298-2:2008 NOTE Harmonized as EN 61298-2:2008 (not modified). IEC 61298-3:2008 NOTE Harmonized as EN 61298-3:2008 (not modified). IEC 61360-1 NOTE Harmonized as EN 61360-1. IEC 61360-2 NOTE Harmonized

18、as EN 61360-2. IEC 61360-5 NOTE Harmonized as EN 61360-5. IEC 61784-1:2014 NOTE Harmonized as EN 61784-1:2014 (not modified). IEC 61987-1 NOTE Harmonized as EN 61987-1. IEC 61987-92 NOTE Harmonized as prEN 61987-92 1). 1) At draft stage. BS EN 61987-14:2016EN 61987-14:2016 3 Annex ZA (normative) Nor

19、mative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated refere

20、nces, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards l

21、isted in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61360 series Standard data element types with associated classification scheme for electric components EN 61360 series IEC 61987-10 2009 Industrial-process measurement and control - Data structures and eleme

22、nts in process equipment catalogues - Part 10: Lists of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals EN 61987-10 2009 IEC 61987-11 2012 Industrial-process measurement and control - Data structures and elements in process equipment catal

23、ogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures EN 61987-11 2012 BS EN 61987-14:2016 2 IEC 61987-14:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 6 4 General . 7 4.1

24、Overview. 7 4.2 Special considerations 7 4.3 Depiction of OLOPs and DLOPs 8 4.4 Examples of DLOP block usage . 8 4.4.1 DLOP “Radiation thermometer” 8 4.4.2 DLOP “Insert/element” . 11 Annex A (normative) Operating list of properties for temperature measuring equipment . 15 Annex B (normative) Device

25、lists of properties for temperature measuring equipment 16 B.1 Temperature gauges . 16 B.2 Temperature transmitters 16 B.2.1 Contact temperature transmitter . 16 B.2.2 Radiation thermometer . 16 B.2.3 Temperature transmitter . 16 B.3 Components 17 B.3.1 Temperature connection head 17 B.3.2 Insert/el

26、ement 17 B.3.3 Separate temperature transmitter . 17 B.3.4 Thermowell 17 B.3.5 Thermowell extension 18 Annex C (normative) Property library 19 Annex D (normative) Block library for considered device types 20 Bibliography . 21 Figure 1 Basic components of a TC/RTD temperature assembly . 8 Table 1 Exa

27、mple for “Radiation thermometer” . 8 Table 2 Example for “Insert/element” 11 BS EN 61987-14:2016IEC 61987-14:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES Part 14: Lists of propertie

28、s (LOP) for temperature measuring equipment for electronic data exchange FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote inte

29、rnational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereaft

30、er referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also partici

31、pate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an i

32、nternational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all re

33、asonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply

34、IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of con

35、formity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this public

36、ation. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, o

37、r for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the corre

38、ct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-14 has been prepared b

39、y subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: CDV Report on voting 65E/458/CDV 65E/489/RVC Full information on the voting for the

40、 approval of this standard can be found in the report on voting indicated in the above table. BS EN 61987-14:2016 4 IEC 61987-14:2016 IEC 2016 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61987 series, published under the general

41、 title Industrial-process measurement and control Data structures and elements in process equipment catalogues, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/we

42、bstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61987-14:2016IEC 61987-14:2016 IEC 2016 5 INTRODUCTION The exchange of product data between companies, business systems, engi

43、neering tools, data systems within companies and, in the future, control systems (electrical, measuring and control technology) can run smoothly only when both the information to be exchanged and the use of this information has been clearly defined. Prior to this standard, requirements on process co

44、ntrol devices and systems were specified by customers in various ways when suppliers or manufacturers were asked to quote for suitable equipment. The suppliers in their turn described the devices according to their own documentation schemes, often using different terms, structures and media (paper,

45、databases, CDs, e-catalogues, etc.). The situation was similar in the planning and development process, with device information frequently being duplicated in a number of different information technology (IT) systems. Any method that is capable of recording all existing information only once during

46、the planning and ordering process and making it available for further processing, gives all parties involved an opportunity to concentrate on the essentials. A precondition for this is the standardization of both the descriptions of the objects and the exchange of information. This standard series p

47、roposes a method for standardization which will help both suppliers and users of measuring equipment to optimize workflows both within their own companies and in their exchanges with other companies. Depending on their role in the process, engineering firms may be considered here to be either users

48、or suppliers. The method specifies measuring equipment by means of blocks of properties. These blocks are compiled into lists of properties (LOPs), each of which describes a specific equipment (device) type. This standard series covers both properties that may be used in an inquiry or a proposal and

49、 detailed properties required for integration of the equipment in computer systems for other tasks. IEC 61987-10 defines structure elements for constructing lists of properties for electrical and process control equipment in order to facilitate automatic data exchange between any two computer systems in any possible workflow, for example engineering, maintenance or purchasing workflow and to allow both the customers and the suppliers of the equipment to optimize their processes and workflows. I