BS EN 61753-101-2-2006 Fibre optic interconnecting devices and passive components performance standard — Part 101-2 Fibre management systems nfor category C — Controlled environmen.pdf

《BS EN 61753-101-2-2006 Fibre optic interconnecting devices and passive components performance standard — Part 101-2 Fibre management systems nfor category C — Controlled environmen.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-101-2-2006 Fibre optic interconnecting devices and passive components performance standard — Part 101-2 Fibre management systems nfor category C — Controlled environmen.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61753-101-2: 2006Fibre optic interconnecting devices and passive components performance standard Part 101-2: Fibre management systems for category C Controlled environmentThe European Standard EN 61753-101-2:2006 has the status of a British StandardICS 33.180.20g49g50g3g38g50g5

2、1g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 61753-101-2:2006Thi

3、s British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978 0 580 50042 8National forewordThis British Standard was published by BSI. It is the UK implementation of EN 61753-101-2:2006. It is identical with IEC 61753-101-2:2

4、006.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on GEL/86/2 can be obtained on request to its secretary.This publication doe

5、s not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Apr 12 06:

6、35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61753-101-2 NORME EUROPENNE EUROPISCHE NORM November 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secr

7、etariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-101-2:2006 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components performance standard P

8、art 101-2: Fibre management systems for category C - Controlled environment (IEC 61753-101-2:2006) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants passifs fibres optiques Partie 101-2: Systmes de gestion de fibres pour la Catgorie C - Environnement contrl (CEI 61753-1

9、01-2:2006) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten Teil 101-2: Einzelfasermanagementsysteme fr die Kategorie C - Geregelte Umgebung (IEC 61753-101-2:2006) This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply with t

10、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat

11、or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the offi

12、cial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,

13、 Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSIForeword The text of document 86B/2348/FDIS, future edition 1 of IEC 61753-101-2, prepared by SC 86B, Fibre optic interconnecting devices

14、 and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-101-2 on 2006-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national

15、 standard or by endorsement (dop) 2007-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-101-2:2006 was approved by CENELEC as a Eur

16、opean Standard without any modification. _ 2 EN 61753-101-2:2006Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSICONTENTS 1 2 3 3.1 3.2 4 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 6.4 6.5 6.6 7 7.1 7.2 3 EN 61753-101-2:2006INTRODUCTION.4 Scope.5 Normative referenc

17、es5 Terms, definitions and abbreviations .6 Terms and definitions 7 Abbreviations.7 Environmental requirements .7 Test procedure .8 General .,8 Stationary use .8 Storage .9 Transportation .9 Installation or intervention9 General Requirements 10 Storage, transportation and packaging .10 Marking and i

18、dentification 10 Materials .10 Traceability11 Safety11 Documentation 11 Performance requirements12 Sample size.12 Performance details.12 Annex A (normative) Sample definition .17 Annex B (normative) Sample size.20 Annex C (informative) Access and reconfiguration/resplicing 22 Bibliography24 Figure A

19、.1 Sample configuration with splices only.17 Figure A.2 Sample configuration with splices and connectors18 Table 1 Performance criteria requirements .12 Table 2 Mechanical performance requirements.13 Table 3 Environmental performance requirements for category C14 Table 4 Transportation and storage,

20、mechanical performance requirements .15 Table 5 Transportation and storage, environmental performance requirements .16 Table A.1 Fibre characteristics for the test samples17 Table B.1 Number of samples for each test 21 Annex ZA (normative) Normative references to international publications with thei

21、rcorresponding European publications. 25Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSIINTRODUCTION This Performance Standard for fibre management systems defines the requirements for standard optical performance under a set of specified conditions. This s

22、tandard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly referred to as an operating service environment or performance category, is intended to be a basis to prove the products ability to satisfy th

23、e requirements of a specific application, market sector or user group. A product that has been shown to meet all the requirements of this performance standard may be declared as complying with this performance standard. Products having the same classification from one manufacturer that satisfy this

24、performance standard, will operate within the boundaries set by the performance standard. There is no guarantee that products from different manufacturers, having the same classification and which conform to the same performance standard, will provide an equivalent level of performance when they are

25、 used together. Conformance with IEC environmental policy according to IEC Guide 109 and concerning the need to reduce the impacts on the natural environment of fibre management system products during all phases of their life from acquiring materials to manufacturing, distribution, use, and end-of-l

26、ife treatment (i.e. re-use, recycling and disposal) is indicated within each product specification. Conformance to a performance standard demonstrates that a product has passed a design verification test. It is not a guarantee of lifetime assured performance or reliability. Reliability testing must

27、be the subject of a separate test schedule, where the tests and severities selected are such that they are truly representative of the requirements of this reliability test programme. Consistency of manufacture should be maintained using a recognised Quality Assurance programme whilst the reliabilit

28、y of a product should be evaluated using the procedures recommended in IEC 62005. Tests and measurements should be selected from the IEC 61300 series. 4 EN 61753-101-2:2006Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSIFIBRE OPTIC INTERCONNECTING DEVICES A

29、ND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 101-2: Fibre management systems for Category C Controlled environment 1 Scope This part of IEC 61753 deals with performance standards for parts of fibre management systems. It defines those tests and severities which form the performance or general ope

30、rating service environment, and identifies those tests which are considered to be product specific. Test and severity details are given. This part of IEC 61753 contains the minimum test and measurement severities which a specific product must satisfy in order to be categorised as meeting the IEC sta

31、ndard, Category C Controlled environment, as defined in Annex A of IEC 61753-1. More severe requirements may be agreed between the customer and the supplier. A product performance standard will contain a combination of those tests and measurements that are common to all products, for a particular se

32、rvice environment or performance category, and those that are considered specific to that particular product in that environment. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. Fo

33、r undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-64, Environmental testing, Part 2-64: Tests methods Test Fh: Vibration, broad-band random (digital control) and guidance IEC 60721-3-1, Classification of environmental conditions Part

34、3: Classification of groups of environmental parameters and their severities Section 1: Storage. IEC 60721-3-2, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 2: Transportation. IEC 60793-2-50, Optical fibres Part

35、2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-1, Fibre optic interconnecting devices and passive components Bas

36、ic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention 5 EN 61753-101-2:2006Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:

37、00 2007, Uncontrolled Copy, (c) BSIIEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-12, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-12: Tests I

38、mpact IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature end

39、urance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change o

40、f temperature IEC 61300-2-33, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests Assembly and disassembly of closures IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2

41、-42: Tests Static side load for connectors IEC 61300-3-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-1: Examinations and measurements Visual examination IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test a

42、nd measurement procedures Part 3-3: Examinations and measurements Active monitoring of changes in attenuation and return loss IEC 61300-3-28, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss IEC 6

43、1753-1, Fibre optic interconnecting devices and passive components Part 1: General and guidance for performance standards2IEC 62134-1, Fibre optic enclosures Part 1: Generic specification 3 Terms, definitions and abbreviations For the purposes of this document, the following terms, definitions and a

44、bbreviations apply. _ 2To be published. 6 EN 61753-101-2:2006Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3.1 Terms and definitions 3.1.1 excursion loss loss monitored (at regular time intervals) during slow variations of environmental parameters 3.1.2 i

45、ntervention gain access to modify, add, remove or repair fibre circuits, splices, connectors or other components between the incoming and outgoing cables of an existing fibre management system 3.1.3 installation establish and install a fibre management system, by adding new circuits, splices, connec

46、tors and other components, including the incoming and outgoing cables 3.1.4 installation conditions circumstances that must be fulfilled for an installation, including environmental conditions, size interface between the closure or enclosure and the fibre management system, optical performance, addi

47、tional/special conditions and safety requirements 3.1.5 residual loss variation of the optical loss of the circuit before versus after an exposure 3.1.6 transient loss sudden variations of the optical loss in a circuits loss characteristics during: a) manipulation of the entire closure or enclosure

48、and its fibre management system; b) access to adjacent circuits stored in the same closure or enclosure; c) sudden effects induced by the external environment (e.g. vibration, shock) 3.2 Abbreviations FMS: Fibre Management System SC: Single Circuit SE: Single Element ME: Multiple Element MR: Multipl

49、e Ribbon 4 Environmental requirements Environmental requirements for products of fibre management systems shall be derived from the requirements for the housings. 7 EN 61753-101-2:2006Licensed Copy: Wang Bin, na, Thu Apr 12 06:35:29 GMT+00:00 2007, Uncontrolled Copy, (c) BSI5 Test procedure 5.1 General The mechanical and environmental performance of fibre management system parts is vital