BS EN 61753-086-2-2009 Fibre optic interconnecting devices and passive components performance standard - Non-connectorised single-mode bidirectional 1490 1550 nm downstream 1310 n.pdf

《BS EN 61753-086-2-2009 Fibre optic interconnecting devices and passive components performance standard - Non-connectorised single-mode bidirectional 1490 1550 nm downstream 1310 n.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-086-2-2009 Fibre optic interconnecting devices and passive components performance standard - Non-connectorised single-mode bidirectional 1490 1550 nm downstream 1310 n.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive componentsperformance standard Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream W

2、WDM devices for category C Controlled environmentBS EN 61753-086-2: 2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 61753-086-2:2009. It isidentical to IEC 61753-086-2:2009.Th

3、e UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does n

4、ot purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 59256 0ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of th

5、e StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-086-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61753-086-2 NORME EUR

6、OPENNE EUROPISCHE NORM November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in

7、any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-086-2:2009 E ICS 33.180.10 English version Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm u

8、pstream WWDM devices for category C - Controlled environment (IEC 61753-086-2:2009) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants passifs fibres optiques - Partie 086-2: Dispositifs WWDM unimodaux non connectoriss bidirectionnels 1490 / 1550 nm en voie descendante e

9、t 1310 nm en voie montante fonctionnant en catgorie C - Environnement contrl (CEI 61753-086-2:2009) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 086-2: Nicht mit Steckverbindern versehene bidirektionale 1 490/1 550-nm-downstream- 1 310-nm-upstream-Einmoden-

10、WWDM-Bauteile fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-086-2:2009) This European Standard was approved by CENELEC on 2009-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

11、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A ver

12、sion in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus,

13、the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61753-086-2:2009Licensed Co

14、py: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSIEN 61753-086-02:2009 - 2 - Foreword The text of document 86B/2892/FDIS, future edition 1 of IEC 61753-086-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre opt

15、ics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-086-2 on 2009-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-08-01 lat

16、est date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-086-2:2009 was approved by CENELEC as a European Standard without any modification. In the

17、official version, for Bibliography, the following note has to be added for the standard indicated: IEC 62074-1 NOTE Harmonized as EN 62074-1:2009 (not modified). _ BS EN 61753-086-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSI- 3 - EN 61753-

18、086-2:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, t

19、he latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 -1)Optical fibres - Part 2-50: Product s

20、pecifications - Sectional specification for class B single-mode fibres EN 60793-2-50 20082)IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-2-1 -1)Fibre optic interconnecting devices and passive components -

21、 Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 20092)IEC 61300-2-4 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 19972)IEC 61300-2-9 -1)Fibre

22、 optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 19972)IEC 61300-2-14 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling

23、and damage threshold characterization EN 61300-2-14 + corr. November 20062)2006 IEC 61300-2-17 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 20032)IEC 61300-2-18 -1)Fibre optic interconnecting devices and

24、 passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 20052)IEC 61300-2-19 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state

25、) EN 61300-2-19 20052)1)Undated reference. 2)Valid edition at date of issue. BS EN 61753-086-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSIEN 61753-086-02:2009 - 4 - Publication Year Title EN/HD Year IEC 61300-2-22 -1)Fibre optic interconnec

26、ting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 20072)IEC 61300-2-42 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for co

27、nnectors EN 61300-2-42 20052)IEC 61300-2-44 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 20082)IEC 61300-3-2 -1)Fibre optic interconnecting devices and pass

28、ive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 20092)IEC 61300-3-6 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -

29、Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 20092)IEC 61300-3-7 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode

30、 components EN 61300-3-7 20012)IEC 61300-3-20 -1)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 + corr. March 20012)2002 IEC 61300-3-29 -1)Fibre

31、 optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterising the amplitude of the spectral transfer function of DWDM components EN 61300-3-29 + corr. November 20062)2006 IEC 61753-

32、1 -1)Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 20072)BS EN 61753-086-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSI 2 61753-086-2 IEC:2

33、009(E) CONTENTS 1 Scope.5 2 Normative references .5 3 Test6 4 Test report6 5 Performance requirements .7 5.1 Reference components7 5.2 Dimensions .7 5.3 Sample size 7 5.4 Test details and requirements .7 Annex A (normative) Sample size 12 Annex B (informative) General information for 1490 / 1550 nm

34、downstream and 1310 nm upstream PON WWDM devices 13 Bibliography14 Figure B.1 Example of 1490 / 1550 nm downstream and 1310 nm upstream WWDM at central office and customer side Separate video detection inside the ONU 13 Figure B.2 Example of 1490 / 1550 nm downstream and 1310 nm upstream WWDM at cen

35、tral office side Integrated video detection inside the ONU.13 Table 1 Test details and requirements .7 Table A.1 Sample size .12 BS EN 61753-086-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSI61753-086-2 IEC:2009(E) 5 FIBRE OPTIC INTERCONNECT

36、ING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 086-2: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category C Controlled environment 1 Scope This part of IEC 61753 contains the minimum initial performance, test and measu

37、rement requirements and severities which a fibre optic pigtailed 1 490 / 1 550 nm downstream and 1 310 nm upstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category C (controlled environme

38、nts), as defined in Annex A of IEC 61753-1. Annex B of this standard provides information concerning the function of the 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated

39、 references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300 (all parts), Fibre

40、optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and pas

41、sive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components

42、 Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage threshold characterization IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devi

43、ces and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-086-2:2009Licen

44、sed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 03:13, Uncontrolled Copy, (c) BSI 6 61753-086-2 IEC:2009(E) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic

45、 interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fib

46、re optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependence of attenuation in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and p

47、assive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Wavelength dependence of attenuation and return loss IEC 61300-3-20, F

48、ibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic branching devices IEC 61300-3-29, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part

49、3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components IEC 61753-1, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standard 3 Test Unless otherwise specified, all test methods are in accordance with the relevant part of IEC 61300 series.