BS EN 61753-051-3-2013 Fibre optic interconnecting devices and passive components Performance standard Single-mode fibre plug style fixed attenuators for category U Uncontrolled en.pdf

《BS EN 61753-051-3-2013 Fibre optic interconnecting devices and passive components Performance standard Single-mode fibre plug style fixed attenuators for category U Uncontrolled en.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-051-3-2013 Fibre optic interconnecting devices and passive components Performance standard Single-mode fibre plug style fixed attenuators for category U Uncontrolled en.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Performance standardPart 051-3: Single-mode fibre, plug style fixed attenuators for category U Uncontrolled environmentB

2、S EN 61753-051-3:2013National forewordThis British Standard is the UK implementation of EN 61753-051-3:2013. It isidentical to IEC 61753-051-3:2013. It supersedes BS EN 61753-051-3:2002which is withdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics

3、, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its

4、 correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 56297 6ICS 33.180.20; 33.180.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPol

5、icy and Strategy Committee on 31 May 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-051-3:2013EUROPEAN STANDARD EN 61753-051-3 NORME EUROPENNE EUROPISCHE NORM May 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Nor

6、malisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-051-3:2013 E ICS 33.180.20 Supersedes E

7、N 61753-051-3:2002 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment (IEC 61753-051-3:2013) Dispositifs dinterconnexion et composants passifs fibres

8、 optiques - Norme de performance - Partie 051-3: Affaiblisseurs fixes de type fiche pour fibres unimodales en catgorie U - Environnement non-contrl (CEI 61753-051-3:2013) Lichtwellenleiter Verbindungselemente und passive Bauteile Betriebsverhalten - Teil 051-3: Lichtwellenleiter-Dmpfungsglieder mit

9、Einmoden-Pigtail in Steckverbinderbauform fr die Kategorie U - Unkontrollierte Umgebung (IEC 61753-051-3:2013) This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu

10、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official v

11、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical

12、committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovak

13、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-051-3:2013EN 61753-051-3:2013 - 2 - Foreword The text of document 86B/3543/FDIS, future edition 2 of IEC 61753-051-3, prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC TC 86, “

14、Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-051-3:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-12-13 la

15、test date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-03-13 This document supersedes EN 61753-051-3:2002. The specific technical changes from EN 61753-051-3:2002 are to reconsider test details and requirement and the constitution of the standard. Att

16、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-051-3:2013 was approv

17、ed by CENELEC as a European Standard without any modification. BS EN 61753-051-3:2013- 3 - EN 61753-051-3:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenc

18、ed in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modificati

19、ons, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive componen

20、ts - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN 61300-2-2 - IEC 61300-2-6 - Fibre optic int

21、erconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-6 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock E

22、N 61300-2-9 - IEC 61300-2-12 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact EN 61300-2-12 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1

23、4: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and mea

24、surement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - BS EN 61753-051-3:2013EN 61753-051-3:2013 - 4 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperatur

25、e EN 61300-2-22 - IEC 61300-2-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist EN 61300-2-26 - IEC 61300-2-27 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P

26、art 2-27: Tests - Dust - Laminar flow EN 61300-2-27 - IEC 61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic EN 61300-2-46 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components -

27、 Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examination

28、s and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fi

29、bre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Exami

30、nations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN

31、61300-3-28 - IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series IEC/TR 62627-02 2010 Fibre optic interconnecting devices and passive components - Part 02: Report of round robin test results on SC plug style fixe

32、d attenuators - - BS EN 61753-051-3:2013 2 61753-051-3 IEC:2013 CONTENTS 1 Scope . 5 2 Normative references . 5 3 Test 6 4 Test report 7 5 Performance requirements . 7 5.1 Sample size, sequencing and grouping 7 5.2 Dimensions . 7 5.3 Test details and requirements . 7 Annex A (normative) Reference co

33、nnector and adaptor . 14 Annex B (normative) Sample size and product sourcing requirements . 15 Table 1 Test details and requirements (1 of 7) . 7 Table A.1 Requirements for reference connector and adaptor 14 Table B.1 Sample size and product sourcing requirements 15 BS EN 61753-051-3:201361753-051-

34、3 IEC:2013 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 051-3: Single-mode fibre, plug style fixed attenuators for category U Uncontrolled environment 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severitie

35、s which a fibre optic attenuator satisfies in order to be categorized as meeting the requirements of single-mode fibre, plug-style fixed attenuator devices used in uncontrolled environments. Optical performances specified in this standard relate to plug-style configurations optical attenuators only.

36、 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amen

37、dments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres1IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-

38、2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability IEC 61300-2-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-6: Tensile strength of coupling mechanism IEC 6

39、1300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-12, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-12: Tests Impact IEC 61300-2-14, Fibre optic interc

40、onnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold 1A fourth edition is due to be published shortly.

41、BS EN 61753-051-3:2013 6 61753-051-3 IEC:2013 IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test an

42、d measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist IEC 61300-2-27, Fibre optic interconnecting devices and passive components Basic test and measur

43、ement procedures Part 2-27: Tests Dust Laminar flow IEC 61300-2-46, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests Damp heat, cyclic IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement

44、 procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurement Active monitoring of changes in at

45、tenuation and return loss IEC 61300-3-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation2IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedure

46、s Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-28,

47、 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss IEC 61754 (all parts), Fibre optic connector interfaces IEC 61755 (all parts), Fibre optic connector optical interfaces IEC/TR 62627-02:2010, Fibr

48、e optic interconnecting devices and passive components Part 02: Report of round robin test results on SC plug style fixed attenuators 3 Test All test methods are in accordance with the IEC 61300 series. All tests shall be carried out to validate performance over the required operating wavelength and

49、 power range. 2A third edition is due to be published shortly BS EN 61753-051-3:201361753-051-3 IEC:2013 7 4 Test report Fully documented test reports and supporting evidence shall be prepared and shall be available for inspection as evidence that the tests have been carried out and complied with. 5 Performance requirements 5.1 Sample size, sequencing and grouping The sample size