BS EN 61753-031-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching .pdf

《BS EN 61753-031-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching .pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-031-2-2014 Fibre optic interconnecting devices and passive components Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching .pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 031-2: Non-connectorized single-mode 1N and 2N non-wavelength-selective branching devices for Category C Controlled environmentBS EN 61753-031-2:2014National forewordThis British Standard is

2、the UK implementation of EN 61753-031-2:2014. Itis identical to IEC 61753-031-2:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represent

3、ed on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 7514

4、0 0ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS

5、 EN 61753-031-2:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61753-031-2 October 2014 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1N and 2N non-wavelength-selective branching devi

6、ces for Category C - Controlled environment (IEC 61753-031-2:2014) Dispositifs dinterconnexion et composants passifs fibresoptiques - Norme de performance - Partie 031-2 : Dispositifs de couplage indpendants de lalongueur donde 1N et 2N en unimodal non-connectoriss pour la catgorie C - Environnement

7、 contrl(CEI 61753-031-2:2014) Lichtwellenleiter - Verbindungselemente und passiveBauteile - Betriebsverhalten - Teil 031-2: Nicht steckbarewellenlngenunabhngige Einmoden-1N- und -2N-Verzweiger fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-031-2:2014) This European Standard was approved by C

8、ENELEC on 2014-10-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand

9、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own languag

10、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

11、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normali

12、sation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-031-2:2014 E EN 61753-031-2:2014 - 2

13、 - Foreword The text of document 86B/3791/FDIS, future edition 1 of IEC 61753-031-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-031-2:2014. The followin

14、g dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-07-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-10-08 Attention i

15、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-031-2:2014 was approved by CE

16、NELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60875-1 NOTE Harmonized as EN 60875-1. IEC 61753-1 NOTE Harmonized as EN 61753-1. BS EN 61753-031-2:2014- 3 - EN 61753-031-2:2014 An

17、nex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appli

18、es. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of th

19、e European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60793-2-50 2012 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 2013 IEC 61300-2-1 - Fibre optic interconnecting

20、 devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4

21、- IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High

22、optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedu

23、res - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnectin

24、g devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - BS EN 61753-031-2:2014EN 61753-031-2:2014 - 4 - Publication Year Title EN/HD Year IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic te

25、st and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-

26、2-44 - IEC 61300-3-2 2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 2009 IEC 61300-3-3 2009 Fibre optic interconnecting de

27、vices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 2009 IEC 61300-3-6 2008 Fibre optic interconnecting devices and passive components - Basic test and measurement pr

28、ocedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 2009 IEC 61300-3-7 (mod) 2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return l

29、oss of single mode components EN 61300-3-7 2012 IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61300-3-28 - Fibre optic i

30、nterconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - BS EN 61753-031-2:2014 2 IEC 61753-031-2:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references 5 3 Test . 6 4 Test report . 7 5 Performa

31、nce requirements 7 5.1 Dimensions . 7 5.2 Sample size 7 5.3 Test details and requirements . 7 Annex A (normative) A and U requirements of 1 N and 2 N NWBDs . 14 A.1 Attenuation and uniformity requirements of 1 N and 2 N NWBDs calculated by the equations of Tests No.1 and 2 . 14 A.2 Minimum requireme

32、nts at room temperature of attenuation values for balanced bidirectional 1 N and 2 N NWBD 15 Annex B (normative) Sample size 17 Bibliography 18 Table 1 Test details and requirements (1 of 6) . 8 Table A.1 Attenuation and uniformity requirements of balanced bidirectional NWBD having the most common p

33、ort configurations for Class A, with the underlying formulas as specified in the Tests 1 and 2 of Table 1 14 Table A.2 Attenuation and uniformity requirements of balanced bidirectional NWBD having the most common port configurations for Class B, with the underlying formulas as specified in Tests 1 a

34、nd 2 of Table 1 15 Table A.3 Attenuation requirements of 1 2 and 2 2 unbalanced NWBD having the most common port configurations, with the underlying formula as specified in Test 1 of Table 1 . 15 Table A.4 Minimum requirements at room temperature of attenuation values for Class A balanced bidirectio

35、nal NWBD . 16 Table A.5 Minimum requirements at room temperature of attenuation values for Class B balanced bidirectional NWBD . 16 Table B.1 Sample size for each test . 17 BS EN 61753-031-2:2014IEC 61753-031-2:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE ST

36、ANDARD Part 031-2: Non-connectorized single-mode 1N and 2N non-wavelength-selective branching devices for Category C Controlled environment 1 Scope This part of IEC 61753 contains the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device

37、(NWBD) should satisfy in order to be categorized as meeting the requirement of this IEC standard. The requirements cover balanced bidirectional non-connectorized single-mode 1 N and 2 N non wavelength-selective branching devices for use in an IEC Category C environment (N is the number of branching

38、ports), especially but not exclusively used for PON application. For balanced NWBD two attenuation and uniformity performance classes are considered: class A (premium class) which meets more restrictive requirements (i.e. for extended reach PON application) and class B (standard class) for standard

39、application (i.e. normal reach PON application). The requirements also cover unbalanced bidirectional non-connectorized single-mode, non-wavelength-selective branching devices; however, the specifications of unbalanced branching devices are limited to 1 2 and 2 2 devices because they are the most co

40、mmonly used. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

41、ing any amendments) applies. IEC 60793-2-50:2012, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoi

42、dal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2

43、-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold BS EN 61753-031-2:2014 6 IE

44、C 61753-031-2:2014 IEC 2014 IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement proc

45、edures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measureme

46、nt procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-2:2009, Fibre optic interconnecting devices

47、 and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-3:2009, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinat

48、ions and measurements Active monitoring of changes in attenuation and return loss IEC 61300-3-6:2008, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7:2009, Fibre optic interconnecting d

49、evices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic