BS EN 61334-4-512-2002 Distribution automation using distribution line carrier systems - Data communication protocols - System management using profile 61334-5-1 - Management Infor.pdf

《BS EN 61334-4-512-2002 Distribution automation using distribution line carrier systems - Data communication protocols - System management using profile 61334-5-1 - Management Infor.pdf》由会员分享，可在线阅读，更多相关《BS EN 61334-4-512-2002 Distribution automation using distribution line carrier systems - Data communication protocols - System management using profile 61334-5-1 - Management Infor.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61334-4-512:2002 IEC 61334-4-512:2001 Distribution automation using distribution line carrier systems Part 4-512: Data communication protocols System management using profile 61334-5-1 Management Information Base (MIB) The European Standard EN 61334-4-512:2002 has the status o

2、f a British Standard ICS 33.200 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 61334-4-512:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standard

3、s Policy and Strategy Committee on 19 April 2002 BSI 19 April 2002 ISBN 0 580 39445 X National foreword This British Standard is the official English language version of EN 61334-4-512:2002. It is identical with IEC 61334-4-512:2001. The UK participation in its preparation was entrusted to Technical

4、 Committee PEL/57, Power system control and associated communications, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For inst

5、ance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in

6、this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. U

7、sers of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation

8、, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 and a back cover. The BSI copyright da

9、te displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61334-4-512 NORME EUROPENNE EUROPISCHE NORM February 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normali

10、sation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61334-4-512:2002 E ICS 33.200 English version

11、 Distribution automation using distribution line carrier systems Part 4-512: Data communication protocols System management using profile 61334-5-1 Management Information Base (MIB) (IEC 61334-4-512:2001) Automatisation de la distribution laide de systmes de communication courants porteurs Partie 4-

12、512: Protocoles de communication de donnes - Administration de systmes laide du profil 61334-5-1 - MIB (Base dInformations dAdministration) (CEI 61334-4-512:2001) Verteilungsautomatisierung mit Hilfe von Trgersystemen auf Verteilungsleitungen Teil 4-512: Datenkommunikations- protokolle Systemverwalt

13、ung bei Anwendung des Profils nach IEC 61334-5-1 - Management-Informationsbasis (MIB) (IEC 61334-4-512:2001) This European Standard was approved by CENELEC on 2002-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

14、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (Eng

15、lish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,

16、 Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 63314-4-15:20022 - 2 - Foreword The text of document 57/544/FDIS, future edition 1 of IEC 61334-4-512, prep

17、ared by IEC TC 57, Power system control and associated communications, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61334-4-512 on 2002-02-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an

18、identical national standard or by endorsement (dop) 2002-11-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-02-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been add

19、ed by CENELEC. _ Endorsement notice The text of the International Standard IEC 61334-4-512:2001 was approved by CENELEC as a European Standard without any modification. _ Page2 EN613344512:2002 BSI19April2002CONTENTS 1 Scope 4 2 Normative references. 4 3 Definitions 5 4 Abbreviations. 7 5 Management

20、 Information Base (MIB) 8 5.1 General types definition 9 5.2 MIB objects linked to Physical Management Variables10 5.3 MIB objects linked to MAC Management Variables .11 5.4 MIB objects linked to LLC Management Variables 14 5.5 MIB objects linked to ACSE Management Variables15 5.6 MIB objects linked

21、 to Application Management Variables16 5.7 MIB System Objects.17 5.8 Other MIB Objects .17 5.9 Summary .22 Annex ZA (normative) Normative references to international publications with their corresponding European publications 25 Page3 EN613344512:2002 BSI19April2002DISTRIBUTION AUTOMATION USING DIST

22、RIBUTION LINE CARRIER SYSTEMS Part 4-512: Data communication protocols System management using profile 61334-5-1 Management Information Base (MIB) 1 Scope This part of IEC 61334 specifies the DCP Management Information Base (MIB). This MIB is used for the management of the communication profile defi

23、ned by the following standards: IEC 61334-5-1 (Physical and MAC sublayer), IEC 61334-4-32 (LLC sublayer), IEC 61334-4-42 (Application protocols), and IEC 61334-4-41 (DLMS). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated ref

24、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61334-4-1:1996, Distribution automation using distribution line carrier systems Part 4: Data communication protocols Section 1: Reference model of th

25、e communication system IEC 61334-4-32:1996, Distribution automation using distribution line carrier systems Part 4: Data communication protocols Section 32: Data link layer Logical link control (LLC) IEC 61334-4-41:1996, Distribution automation using distribution line carrier systems Part 4: Data co

26、mmunication protocols Section 41: Application protocols Distribution line message specification IEC 61334-4-42:1996, Distribution automation using distribution line carrier systems Part 4: Data communication protocols Section 42: Application protocols Application layer IEC 61334-4-511:2000, Distribu

27、tion automation using distribution line carrier systems Part 4-511: Data communication protocols Systems management CIASE protocol IEC 61334-5-1:2001, Distribution automation using distribution line carrier systems Part 5-1: Lower layer profiles The spread frequency shift keying (S-FSK) profile ISO/

28、IEC 7498-1:1994, Information technology Open Systems Interconnection Basic Reference Model Part 1: The Basic Model ISO/IEC 7498-3:1997, Information technology Open Systems Interconnection Basic Reference Model Part 3: Naming and addressing ISO/IEC 7498-4:1989, Information technology Open Systems Int

29、erconnection Basic Reference Model Part 4: Management framework ISO/IEC 8509:1987, Information processing systems Open Systems Interconnection Service conventions ISO/IEC 9545:1994, Information technology Open Systems Interconnection Application Layer structure Page4 EN613344512:2002 BSI19April20023

30、 Definitions For the purpose of this part of IEC 61334, the following terms as defined in ISO/IEC 7498-1, ISO/IEC 7498-3, ISO/IEC 7498-4, ISO/IEC 8509, ISO/IEC 9545, IEC 61334-4-1, IEC 61334-4-41, IEC 61334-4-42 and IEC 61334-4-511 and the additional definition apply. 3.1 ISO/IEC 7498 a) open system

31、, b) application-process, c) (N)-layer, d) (N)-sublayer, e) (N)-service, f) (N)-service-access-point, g) (N)-protocol, h) (N)-protocol-data-unit, i) (N)-service-data-unit, j) systems-management, k) application-entity, l) application-service-element, m) user-element. 3.2 ISO/IEC 7498-3 a) (N)-address

32、, b) (N)-selector, c) (N)-association, d) (N)-directory-function, e) (N)-entity, f) (N)-entity-title, g) system-title. 3.3 ISO/IEC 7498-4 a) Systems management application-entity, b) OSI Management, c) Management Object, d) Management Information Base. Page5 EN613344512:2002 BSI19April20023.4 ISO/IE

33、C 8509 a) primitive, b) request, c) indication, d) response, e) confirm. 3.5 ISO/IEC 9545 a) application-context. 3.6 IEC 61334-4-1 a) NEW-address, b) AllSMAE-Title. 3.7 IEC 61334-4-41 a) client, b) server, c) Virtual Distribution Equipment (VDE). 3.8 IEC 61334-4-42 a) application context. 3.9 IEC 6

34、1334-4-511 a) initiator, b) active initiator, c) new/authorized systems, d) manager, e) new system, f) new system title, g) registered system, h) reporting system, i) system. 3.10 application-identifier identifies an application in a system. Two applications associated with the same VDE-type attribu

35、te cannot have the same application-identifier. Page6 EN613344512:2002 BSI19April20024 Abbreviations ACSE Association Control Service Element ASE Application Service Element CIASE Configuration Initiation ASE DASE DLMS Application Service Element DCP Data Communication Protocols DLMS Distribution Li

36、ne Message Specification IEC International Electrotechnical Commission ISO International Organization for Standardization LLC Logical Link Control L-SAP Link Service Access Point MAC Medium Access Control MIB Management Information Base OSI Open Systems Interconnection OSIE Open Systems Interconnect

37、ion Environment PDU Protocol Data Unit SAP Service Access Point SDU Service Data Unit SMAE Systems Management Application Entity VDE Virtual Distribution Equipment The following initials are used to specify the layers or sublayers: a) PHY Physical layer, b) DL Data_Link layer, c) MA MAC sublayer, d)

38、 L LLC sublayer, e) CI CIASE sublayer (Application layer). Page7 EN613344512:2002 BSI19April20025 Management Information Base (MIB) This standard provides a selection of DLMS objects gathered together in a so-called Management Information Base (MIB). This selection corresponds to a set of variables

39、that are used for the management of the PLAN (Power Line Automation Network) profile. This profile is based on IEC 61334-5-1 (physical layer and MAC sublayer), IEC 61334-4-32 (LLC sublayer), IEC 61334-4-42 (Application protocols), IEC 61334-4-511 (CIASE protocol) and IEC 61334-4-41 (DLMS) standards.

40、 From a DLMS point of view, an MIB is associated with a specific VDE called the “Management VDE“. Characteristics of the Management VDE: The Management VDE is accessible from the LLC sublayer through an SAP equal to 0. The conformance block characteristics of this VDE are described in IEC 61334-4-51

41、1. The VDE type is 0. The resources attribute of the VDE is associated with the Visible String: PLAN MIB 1.0. The DLMS view of the MIB leads to consider mainly management Named Variable Objects. The types of the objects that are involved in the systems interoperability are defined in a DLMS objects

42、description way. The Named Variable Objects are sorted according to the communication layer to which they are mainly bound. The present clause describes the objects parameters, the specific type of the named variable described and any remarks on their use. A DLMS name space from 0 to 4095 (in decima

43、l notation) is reserved for extensions of standardized Management Objects. Specific manufacturer objects can be added to the Management VDE provided that their names are greater than 4096 (in decimal notation). The present MIB is designed to facilitate implementation in very simple devices. It is al

44、so anticipated that DLMS will exchange information based on other standardized MIB definitions. For example, SNMP RMON (Internet RFC 1757: “Remote Network Monitoring Management Information Base”, February 1995) is a widely applied set of definitions supported in many network protocols for remote man

45、agement. Since the name space of DLMS is constrained, mapping to this large data structure would consume too much of the limited name space. It can therefore be accomplished through the definition of a single Named Variable Object of type STRUCTURE, and, Detailed Access would be used to navigate the

46、 structure to its individual components. The name 4088 (in decimal notation) is reserved for the future definition of SNMPs RMON MIB. The Named Variable Objects from 4032 to 4080 are similarly reserved for definition of other MIBs including CMIS/CMIP based MIBs. Page8 EN613344512:2002 BSI19April2002

47、5.1 General types definition 5.1.1 Structure The DCP Systems Management uses the same types as DLMS (see IEC 61334-4-41, 10.2 for further details). However, there is a need for a special type “list”. The DCP System Management uses the existing type “array” where the type “list” is needed. The type “

48、array” for that purpose has a special characteristic; i.e. it has a maximum size and a variable number of elements. Table 1 Type Description argument Type Description Code Kind of Type M Array-list S Maximum number of Elements M Type Description M Structure S List of Type Description M Simple S Clas

49、s M A type is described by a recursively specified argument. This argument describes a branching tree, called a type tree. The leaves of this tree are the simple data elements of the variable described by the type. If a type describes a complex variable, then the type tree will have one or more non-leaf nodes, each of which represents a complex type constructed from the possible complex typ