BS EN 61298-4-2008 Process measurement and control devices - General methods and procedures for evaluating performance - Evaluation report content《过程测量和控制装置 性能评定用一般方法和程序 评估报告内容》.pdf

《BS EN 61298-4-2008 Process measurement and control devices - General methods and procedures for evaluating performance - Evaluation report content《过程测量和控制装置 性能评定用一般方法和程序 评估报告内容》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61298-4-2008 Process measurement and control devices - General methods and procedures for evaluating performance - Evaluation report content《过程测量和控制装置 性能评定用一般方法和程序 评估报告内容》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Process measurement andcontrol devices Generalmethods and procedures forevaluating performance Part 4: Evaluation

2、 report contentBS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 61298-4:2008. It isidentical to IEC 61298-4:2008. It supersedes BS EN 61298-4:1996 which iswithdra

3、wn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/65, Measurement and control, to Subcommittee GEL/65/2, Elements ofsystems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include a

4、ll the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 55956 3ICS 25.040.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and S

5、trategy Committee on 31 October 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61298-4 NORME EUROPENNE EUROPISCHE NORM November

6、 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means res

7、erved worldwide for CENELEC members. Ref. No. EN 61298-4:2008 E ICS 25.040.40 Supersedes EN 61298-4:1995English version Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (IEC 61298-4:2008) Dispositifs de mesure et

8、de commande de processus - Mthodes et procdures gnrales dvaluation des performances - Partie 4: Contenu du rapport dvaluation (CEI 61298-4:2008) Prozessmess-, -steuer- und -regelgerte - Allgemeine Methoden und Verfahren fr die Bewertung des Betriebsverhaltens - Teil 4: Inhalt des Bewertungsberichtes

9、 (IEC 61298-4:2008) This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

10、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

11、onsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, German

12、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26, Unc

13、ontrolled Copy, (c) BSIEN 61298-4:2008 - 2 - Foreword The text of document 65B/688/FDIS, future edition 2 of IEC 61298-4, prepared by SC 65B, Devices any particular method or procedure, not covered by this standard, should be developed and specified in the new standard in accordance with the criteri

14、a, as far as they are applicable, stated in this standard; any conceptual or significant deviation from the content of this standard, should be clearly identified and justified if introduced in a new standard. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26,

15、 Uncontrolled Copy, (c) BSI 6 61298-4 IEC:2008 PROCESS MEASUREMENT AND CONTROL DEVICES GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE Part 4: Evaluation report content 1 Scope This part of IEC 61298 specifies general methods and procedures for conducting tests, and reporting on the functi

16、onal and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs, and include analogue and

17、digital devices. For devices that require special tests, this standard should be used, together with any product specific standard specifying special tests. This standard specifies the content of the written report on the evaluation or tests on a process measurement or control device, and the result

18、s obtained. It specifies the major items which should be included in the evaluation report, but it does not specify the exact format in which the contents should be presented. (This is left to the discretion of the test laboratory which prepares and issues the report.) 2 Normative references The fol

19、lowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Vo

20、cabulary (IEV) IEC 60050-300, International Electrotechnical Vocabulary (IEV) Electrical and electronic measurements and measuring instruments (composed of Part 311, 312, 313 and 314) IEC 60050-351, International Electrotechnical Vocabulary (IEV) Part 351 : Control technology 3 General consideration

21、s 3.1 Report coverage One report shall refer to one evaluation on a subject device. If a second evaluation is made on the same device, then a separately numbered report shall be issued. 3.2 Report binding Each copy of the report shall be bound with covers, so that the pages cannot become separated.

22、No particular method of binding together the pages of the report is specified. This is left to the discretion of the test laboratory issuing the report. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26, Uncontrolled Copy, (c) BSI61298-4 IEC:2008 7 3.3 Page nu

23、mbering Each page of the report shall be identified with a unique, sequential page number. It is a convention to regard the first page of text in the report as page 1, with subsequent pages numbered sequentially. Page numbers shall be shown in the format “Page x of y“ , where x is the specific page

24、number and y is the number of the last page of the report. The report number should be given also. If a separate title page is placed at the front of the report, this is not usually included in the page numbering sequence. 3.4 Draft and final reports It is sometimes desirable and advantageous to iss

25、ue a preliminary, draft version of an evaluation report for comment prior to the issue of a formal, final version of the report. Each page of draft reports shall be clearly identified as such, but need not be presented or bound exactly as the subsequent final report. 3.5 Abridged reports At the disc

26、retion of the issuing authority, or the test laboratory, an abridged version of the report may be issued, complementary to the full report. If an abridged report is issued, it shall always include at least the introduction, major findings, and manufacturers comments, exactly as presented in the full

27、 report. 3.6 Units SI units should be used throughout the report. When other units need to be used, the SI equivalent should be given in brackets alongside. 4 Report title Each report title shall give all the following information: report number; date of issue; manufacturers name, and country of man

28、ufacture; instrument type; model name or number. The report number shall be a unique number, one of a series, which refers only to one report of one evaluation, or possibly a series of evaluations. The manufacturers name shall be the full name of the manufacturer company at the time when the instrum

29、ent was supplied for evaluation. Any changes in name during the period of evaluation should be indicated in the introduction of the report. The country of manufacture shall be where the device was finally assembled into a complete instrument. This may not be the same as the country from which the in

30、strument was supplied for evaluation. The correct status may need to be confirmed by the author of the report. The instrument type shall be a brief, general description of function, application details and size or range. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/

31、2010 02:26, Uncontrolled Copy, (c) BSI 8 61298-4 IEC:2008 Any further details about the equipment itself, or the range of tests applied, should be described in the introduction of the report. 5 Preliminary pages 5.1 Title page This page shall include the full report title, as specified in Clause 4,

32、plus the name of the test laboratory and the names(s) of the author(s). The report shall identify the sponsor of the evaluation and any information regarding the use of any proprietary information contained. Additional information about the laboratory compiling the report may be provided on this pag

33、e at the discretion of the laboratory. This page is not usually numbered. 5.2 Contents page This page is not included in the sequence of page numbers for the text of the report. 5.3 Photograph of the equipment tested This shall always be shown in Figure 1. It should preferably appear facing page 1 o

34、f the report. It should be a photograph of the equipment actually tested with the covers on, three-quarter front view, if this is possible. If a photograph of the same type of equipment, provided by the manufacturer, is used, this should be stated. A scale, or some other means to indicate the size o

35、f the equipment, shall be included in Figure 1. 6 First page of report This page shall always contain the heading to the report and the introduction. It may also contain the first part of the “Major findings and comments“ clause. The heading to the report shall always contain at least the following

36、information: title of the report (including manufacturers name, type of device and model); author(s) names(s) and professional qualifications; name of evaluation laboratory; project number; sponsor(s) of the project; report number; date (month and year) of issue of the final report. 7 Report introdu

37、ction The introduction should not cover more than one page. The paragraphs indicated below should be included in this clause, using the standard wording shown in italic print, wherever relevant. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/01/2010 02:26, Uncontrolled C

38、opy, (c) BSI61298-4 IEC:2008 9 Paragraph 1 “This report describes the evaluation of a. (instrument and model) manufactured by. (manufacturers name). The instrument was a. (standard production/prototype/etc. model) manufactured in. (country of manufacture)“. Paragraph 2 “The instrument was evaluated

39、to a test programme drawn up by. (laboratory or sponsor) based on. (quote briefly the main relevant standards do not give full references here these will be given in subclause 14.1)“. Paragraph 3 Functional purpose of instrument tested. Give also, as appropriate, input span, output span, range, and

40、whether adjustable or not. Paragraph 4 The manufacturers quoted indication of general performance. Paragraph 5 A brief description of the principle of operation. Paragraph 6 Primary application, intended environment, ancillary equipment, options available, special features, etc., power supply requir

41、ed, safety status (whether approved or not for use in flammable atmospheres). Paragraph 7 “The equipment was delivered on. and was evaluated over a period of. weeks/months from. (commencement date) until. (date of completion of tests).“ If this period is unduly protracted the reason(s) for the delay

42、s should be briefly stated. 8 Major findings and comments Two sentences similar to the following examples shall appear immediately under the title. “These findings are summarized here for ready reference, and to give an overview of the evaluation. For a complete assessment of the instrument, the rep

43、ort shall be read and considered as a whole.“ “All errors and changes are expressed as a percentage of output span unless otherwise stated.“ This clause should summarize and comment on the most significant findings from the evaluation. The comments should be brief and concise, and, for example, may

44、be grouped under the following headings. Manufacturers performance specifications Briefly comment if the manufacturers specifications are not comprehensive. Satisfactory performance features State all the tests in which the results were satisfactory and within the manufacturers relevant specificatio

45、n. If required, a summary of the results may be given. Performance outside specification State all the tests in which the results were not satisfactory, or outside the manufacturers specification. A summary of the results should be given. BS EN 61298-4:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA

46、 STANDARDS, 21/01/2010 02:26, Uncontrolled Copy, (c) BSI 10 61298-4 IEC:2008 Aspects of unspecified performance Summarize the results of tests for which there was no manufacturers specification. Unexpected events Unexpected events observed during the evaluation, such as a fault, and the action taken

47、, should be reported here. More detailed reference to this should be given in Clause 10. Give brief details of any repairs carried out, by whom, and how quickly. If essential, a detailed description can be included as an annex to the report. Construction and maintenance Give brief comments on the qu

48、ality of materials, construction, workmanship, finishes, etc. State any production faults found during initial visual inspection, and during testing. If possible, state whether components were of assessed quality, and whether finishes stood up to humidity testing, corrosion testing, drop or shock te

49、sting, and ordinary handling. If appropriate, comment on any potential difficulties for maintenance. Installation State the method of installation and give any comments on the likely ease or difficulties and state the time likely to be taken. Commissioning Report whether or not any commissioning was necessary and, if so, the time taken, who did it and how easy it was, or whether any difficulties were experienced. Safety State the operator safety aspects