BS EN 61293-1995 Marking of electrical equipment with ratings related to electrical supply - Safety requirements《带额定值供电电气设备的标记 安全性要求》.pdf

《BS EN 61293-1995 Marking of electrical equipment with ratings related to electrical supply - Safety requirements《带额定值供电电气设备的标记 安全性要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61293-1995 Marking of electrical equipment with ratings related to electrical supply - Safety requirements《带额定值供电电气设备的标记 安全性要求》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BSEN 61293:1995 IEC1293:1994 Marking of electrical equipment with ratings related to electrical supply Safetyrequirements The European Standard EN 61293:1994 has the status of a British StandardBS EN 61293:1995 This British Standard, having been prepared under the directionof the El

2、ectrotechnical Sector Board, was published underthe authority of the Standards Board and comes intoeffect on 15 March 1995 BSI03-1999 The following BSI references relate to the work on this standard: Committee reference GEL/16 Draft for comment 90/32483 DC ISBN 0 580 23725 7 Cooperating organization

3、s The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: Austria Italy Belgium Luxembourg Denmark Netherlands Finland Norway France Portugal Germany Spain Greece

4、 Sweden Iceland Switzerland Ireland United Kingdom Amendments issued since publication Amd. No. Date CommentsBS EN 61293:1995 BSI 03-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 Text of EN61293 3 National annex NA (informative) Committees responsi

5、ble Inside back cover National annex NB (informative) Cross-references Inside back coverBSEN 61293:1995 ii BSI 03-1999 National foreword This British Standard has been prepared under the direction of the Electrotechnical Sector Board and is the English language version of EN61293:1994, Marking of el

6、ectrical equipment with ratings related to electrical supply Safety requirements, published by the European committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1293:1994 published by the International Electrotechnical Commission (IEC). A British Standard does not purpor

7、t to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cov

8、er, Pages i and ii, theENtitle page, pages2 to8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NO

9、RM EN61293 September1994 ICS29.020 Descriptors: Electric equipment, electric power supply, characteristics, marking, graphic symbols, safety, specifications English version Marking of electrical equipment with ratings related to electrical supply Safety requirements (IEC 1293:1994) Marquage des matr

10、iels lectriques avec des caractristiques assignes relatives lalimentation lectrique Prescriptions de scurit (CEI1293:1994) Kennzeichnung elektrischer Betriebsmittel mit Bemessungsdaten fr die Stromversorgung Anforderungen fr die Sicherheit (IEC 1293:1994) This European Standard was approved by CENEL

11、EC on1994-07-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

12、 may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

13、 to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Un

14、ited Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN 61293:1994 EE

15、N 61293:1994 BSI 02-1999 2 Foreword The text of document 16(CO)75, as prepared by IEC Technical Committee 16: Terminal markings and other identifications, was submitted to the IEC-CENELEC parallel vote in January 1994. The reference document was approved by CENELEC as EN 61293 on 5 July 1994. The fo

16、llowing dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given only for information. In this standard, Annex A and Annex B are informative and Annex ZA is normative. Contents Page Foreword 2 1 Scope 3 2 Normative references 3

17、 3 Marking requirements 3 3.1 Basic requirements 3 3.2 Marking of electrical equipment withits characteristics 4 3.3 Sequence of rated values and other characteristics 5 3.4 Representation of values 5 Application 5 Annex A (informative) Examples 6 Annex B (informative) Bibliography 7 Annex ZA (norma

18、tive) Other international publications quoted in this standard with the references of the relevant European publications 8 Table A.1 Examples of markings for electricalequipment with ratings related tosupplyofelectricity 6 Table A.2 Examples of letter notations andgraphical symbols 7 latest date of

19、publication of an identical national standard (dop) 1995-07-01 latest date of withdrawal of conflicting national standards (dow) 1995-07-01EN 61293:1994 BSI 03-1999 3 1 Scope This International Standard establishes minimum requirements (see note 1) and general rules on marking electrical equipment (

20、see note 2) with ratings and other characteristics to enable the proper and safe selection and installation of electrical equipment related to any supply of electricity. The object of this standard is to: provide general requirements for marking of the characteristics related to any supply system, s

21、uch as voltage, current, frequency and power without any restrictions; provide technical committees with uniform methods for the marking of electrical ratings of products. This basic safety publication is for general application by relevant technical committees when specifying minimum markings of ra

22、tings related to any electrical supply of equipment, sub-assemblies and components. Relevant technical committees may specify additional requirements for the marking of supply characteristics. NOTE 1For further markings see ISO/IEC Guide 51 1 1) . NOTE 2For the definition of electrical equipment see

23、 IEC50(826). 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements

24、based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC27, Letter symbols to be used in electrical technology. IEC3

25、8:1983, IEC standard voltages. IEC50(826):1982, International Electrotechnical Vocabulary (IEV) Chapter 826: Electrical installations of buildings Amendment No. 1 (1990). IEC417:1973, Supplement G (1985) Supplement K (1991), Graphical symbols for use on equipment. Index, survey and compilation of th

26、e single sheets. IEC445:1988, Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system. IEC617, Graphical symbols for diagrams. IEC617-2:1983, Graphical symbols for diagrams Part 2: Symbol elements, qualifying symb

27、ols and other symbols having general application. IEC1082-1:1991, Preparation of documents used in electrotechnology Part 1: General requirements. ISO31-0:1992, Quantities and units Part 0: General principles. ISO1000:1992, SI units and recommendations for the use of their multiples and of certain o

28、ther units. ISO7000:1989, Graphical symbols for use on equipment Index and synopsis. 3 Marking requirements 3.1 Basic requirements Electrical equipment shall be marked with electrical ratings on the equipment by a suitable method, for example, by means of name-plates or labels. This marking shall be

29、 legible, visible and durable throughout the anticipated life of the equipment. Marking shall not be placed on parts intended to be removed, unless it is part of an enclosure which is intended to be removed to install the equipment and must be replaced (see notes 1, 2 and 3). Some equipment has a ne

30、ed for marking both input and output characteristics. In such cases consideration shall be given by the relevant technical committee to providing markings for output as well as for input characteristics. 1) Figures in square brackets refer to the bibliography given in Annex B.EN 61293:1994 4 BSI 03-

31、1999 Some electrical equipment may be designed for use on more than one supply voltage or frequency. On some equipment the user may be required to make adjustments for use on a supply system with a given nominal voltage. Some equipment is designed to operate on several nominal voltages or over a vol

32、tage range without any adjustment and is marked accordingly. The details of the method of marking shall be the responsibility of the relevant technical committees. Marking of equipment shall be uniform and consistent with the preparation of documents used in electrotechnology as given in IEC1082-1.

33、Ratings shall be marked with standard abbreviations according to IEC445 or with standard graphical symbols taken from IEC417, IEC617 or ISO7000. Physical quantities shall be expressed using only the numerical value and their decimal multiples and submultiples followed by the unit symbol as specified

34、 in IEC27, ISO31-0 and ISO1000. Dimensions and tolerances shall be indicated in an unambiguous manner (see note 4). NOTE 1The choice of material, method and location of the marking or further requirements are the responsibility of the relevant technical committee. NOTE 2Additional markings may be pu

35、t on the packaging and/or given in an instruction sheet which accompanies the equipment. NOTE 3Tests for durability of marking, if required, are specified in the relevant product standard. NOTE 4For examples see IEC/ISO Directives Part 3 2. 3.2 Marking of electrical equipment with its characteristic

36、s Equipment shall be marked as specified in 3.1 with rated values and other characteristics related to any electricity supply. Each technical committee shall select the characteristics listed in 3.2 necessary to enable proper and safe application of equipment. Ratings and other characteristics which

37、 are not necessary may be omitted. For products too small to accommodate a rating plate, colour identification or other means according to a standard or a recognized code should be used. 3.2.1 Characteristics of supply systems Equipment shall be marked with the relevant characteristics of the supply

38、 system to which it has to be connected as follows: kind of supply system (AC, DC,), see IEC 38; number of phase conductors (e.g. 1, 2, 3); other designated conductors (e.g. N, M, PE, see IEC 445); voltage corresponding to the supply system (see IEC 38). Capital letters without full stops shall be u

39、sed. Alphanumeric notations may be replaced by graphical symbols according to IEC 417. Examples for the recommended applications of these rules, also for the sequence of order and the separation of the characteristics by a solidus “/” are given in Table A.1, Annex A. The alternative symbol for marki

40、ng of direct current (DC) with a single line (see No. 02-02-01, form 1, IEC617-2) shall not be used. 3.2.2 Rated values of equipment rated voltage in volts (V); rated frequency in hertz (Hz); rated current in amperes (A); and/or rated input and/or output power in watts (W) or voltamperes (VA). Stand

41、ard multiplier abbreviations are permitted, as shown in Table A.1, Annex A. NOTEThe relevant technical committee may specify markings for further characteristics, for example: IP code according to IEC 529 3; class of equipment according to IEC 536 4.EN 61293:1994 BSI 03-1999 5 3.3 Sequence of rated

42、values and other characteristics If a given sequential order is needed, or the space available is restricted, for example, to one line, the following sequence is recommended: characteristics of supply system (3.2.1); rated values and unit symbols (3.2.2); other characteristics. Example: 3/N/PE 400/2

43、30 V50Hz. For ratings which are listed vertically a horizontal line may be used to avoid confusion (see Table A.1). 3.4 Representation of values Each indication within the marking shall consist of the numerical value followed by the unit symbol. If no confusion exists, the unit symbol may be omitted

44、. 3.4.1 Single value Each rating indication shall consist of: a single numerical value; a unit symbol. Example: 60kV. 3.4.2 Two and more values Equipment suitable for use on any of several specified rated values of input characteristics which requires necessary manual adjustment for operation shall

45、be marked as follows: numerical values separated by a solidus (/) in a consistent sequential order; unit symbol. Example: 24/12/6V. For equipment which may be used on any of various values of voltages or frequencies but when the switching between the values is automatic, the markings shall be follow

46、ed by the capital letters AUTO, which may be replaced by the following graphical symbol: NOTE 1Switches, or other selector devices, on the equipment used to set it for the different values should be clearly marked so that it is obvious which values are set. NOTE 2A descending order of values is reco

47、mmended. 3.4.3 Range of values Equipment with a range of rated values (e.g. rated voltages), so that it can be used within a specified range of values without any adjustment, and which is designated by the lower and higher end of the range, shall be marked with: the end values separated by three dot

48、s (.) or hyphen (-); the unit symbol. NOTE 1See 3.1 regarding the requirement for uniformity and consistency between the markings and the documentation. NOTE 2An ascending order of values is recommended. 4 Application Examples of marking meeting the requirements given in clause 3 are represented in

49、Table A.1, Annex A. Further applications should be derived from these examples. Examples: 6V . . . 12V 6 . . . 12V 6V - 12V 6 - 12VEN 61293:1994 6 BSI 03-1999 Annex A (informative) Examples Table A.1 Examples of markings for electrical equipment with ratings related to supplyofelectricity Completewords Graphical symbol Abbreviation Direct current10A DC10A Alternating current1kA AC1KA Direct voltage230V DC230V Alternating voltage400V AC400V Direct or alternating voltage250V AC/D