BS EN 61076-4-108-2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors with a modular pitcl.pdf

《BS EN 61076-4-108-2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors with a modular pitcl.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-4-108-2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors with a modular pitcl.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61076-4-108: 2002 Connectors for electronic equipment Part 4-108: Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15

2、 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 The European Standard EN 61076-4-108:2002 has the status of a British Standard ICS 31.220.10 BS EN 61076-4-108:2002 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 2 June 2003

3、 BSI 2 June 2003 ISBN 0 580 41934 7 National foreword This British Standard is the official English language version of EN 61076-4-108:2002. It is identical with IEC 61076-4-108:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components an

4、d mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which impleme

5、nt international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publica

6、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European comm

7、ittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to

8、71 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61076-4-108 NORME EUROPENNE EUROPISCHE NORM June 2002 CENELEC European Committee for Electrotechnical Sta

9、ndardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-4-

10、108:2002 E ICS 31.220.10 English version Connectors for electronic equipment Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of

11、15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 (IEC 61076-4-108:2002) Connecteurs pour quipements lectroniques Partie 4-108: Connecteurs pour cartes imprims sous assurance de la qualit - Spcification particulire pour connecteurs cable-circuit imprim avec un pas de module de 25 m

12、m et une fonction de blindage intgr, pour densit de botier de 15 mm, ayant une grille au pas de 2,5 mm conformment la CEI 60917-1 (CEI 61076-4-108:2002) Steckverbinder fr elektronische Einrichtungen Teil 4-108: Steckverbinder fr gedruckte Schaltungen mit bewerteter Qualitt - Bauartspezifikation fr K

13、abel- Leiterplattensteckverbinder mit 25 mm modularer Teilung und integrierter Schirmfunktion fr seitliche Packungsdichte von 15 mm in Raster 2,5 mm nach IEC 60917-1 (IEC 61076-4-108:2002) This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to comply with the CEN/

14、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to a

15、ny CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official ve

16、rsions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.Foreword Th

17、e text of document 48B/1122FDIS, future edition 1 of IEC 61076-4-108, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-4-108 on 2002-03

18、-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-03-01 Annex

19、es designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annex A is informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 610

20、76-4-108:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN610764108:2002)E(2002:CEI 801-4-67016 3 CONTENTS 1 General data 7 1.1 Recommended method of mounting.7 1.1.1 Maximum number of contacts.8 1.2 Ratings and characteristics10 1.3 Normative references 10 1.4

21、 Marking.11 1.5 IEC type designation .12 1.6 Ordering information12 2 Technical information .13 2.1 Definitions.13 2.1.1 Mechanical features.13 2.1.2 Contacts and terminations13 2.1.3 Engagement sequence.13 2.1.4 Mechanical coding, locking 14 2.2 Surveys of styles and variants .14 2.2.1 Styles of co

22、nnectors 14 2.2.2 Survey of termination variants18 2.3 Information on application19 2.3.1 Connector pairs .19 2.3.2 Fixed board connectors20 2.3.3 Free cable connectors .21 2.3.4 Accessories.21 2.3.5 Shielding and grounding 22 2.3.6 Basic styles of the connections 23 2.4 Survey of contact arrangemen

23、ts 23 3 Dimensional information .24 3.1 General.24 3.2 Isometric view and common features .25 3.2.1 Common features 26 3.2.2 Reference system26 3.2.3 Height dimensions .27 3.2.4 Width dimensions 28 3.2.5 Depth dimensions 29 3.3 Mating information.29 3.3.1 Engaging direction.29 3.3.2 Perpendicular to

24、 engaging direction .29 3.3.3 Inclination29 3.4 Fixed board connectors .30 3.4.1 Dimensions of board connectors 30 3.4.2 Dimensions of male contacts37 Page3 EN610764108:2002 4 801-4-67016 )E(2002:CEI 3.5 Free cable connectors .39 3.5.1 Dimensions of cable connectors.39 3.5.2 Dimensions of female con

25、tacts.43 3.6 Accessories.44 3.6.1 Coding devices 44 3.6.2 Shielding / ground contact45 3.7 Mounting information for fixed board connectors 46 3.7.1 Hole pattern on backplane .46 3.7.2 Hole pattern on printed board (front) 47 3.8 Mounting information for free cable connectors47 3.9 Gauges .48 3.9.1 S

26、izing and retention force gauges 48 3.9.2 Test gauge for shield / ground contact48 4 Characteristics .49 4.1 Climatic categories49 4.2 Electrical.49 4.2.1 Creepage and clearance distances 49 4.2.2 Voltage proof.49 4.2.3 Current carrying capacity .50 4.2.4 Initial contact resistance 50 4.2.5 Initial

27、insulation resistance.50 4.3 Mechanical51 4.3.1 Mechanical operation.51 4.3.2 Engaging and separating forces.51 4.3.3 Contact retention in insert51 4.3.4 Static load, transverse .51 4.3.5 Withdrawal force with gauge 51 4.3.6 Vibration (sinusoidal) .52 4.3.7 Shock 52 4.3.8 Polarizing method52 4.3.9 M

28、echanical coding .52 4.3.10 Latching force in male connector body .53 4.3.11 Cable clamp resistance to cable rotation 53 4.3.12 Cable connector drop test 53 4.4 Electromagnetic compatibility (EMC)53 4.4.1 Shielding effectiveness 53 5 Test schedule.54 5.1 General.54 5.1.1 Arrangement for contact resi

29、stance measurement 55 5.1.2 Arrangement for dynamic stress tests 55 5.1.3 Arrangement for testing static load, transverse.56 5.1.4 Arrangement for testing insulation resistance, voltage proof and polarization voltage57 5.1.5 Arrangement for flammability test.57 5.2 Test schedule tables .58 5.2.1 Gro

30、up P Preliminary58 5.2.2 Group AP Dynamic / Climatic 59 5.2.3 Group BP Mechanical endurance 62 Page4 EN610764108:20025.2.4 Group CP Moisture .63 5.2.5 Group DP Electrical load.63 5.2.6 Group EP Mechanical resistivity 64 5.2.7 Group FP Chemical resistivity .65 5.2.8 Group GP Connections .65 5.2.9 Gro

31、up HP Electromagnetic compatibility65 6 Quality assessment procedures 65 6.1 Qualification approval testing.65 6.1.1 Method 1.65 6.1.2 Method 2.65 6.2 Quality conformance inspection .66 6.2.1 Lot-by-lot tests.66 6.2.2 Periodic tests.67 6.3 Delayed delivery, re-inspection 67 Annex A (informative) Shi

32、elding effectiveness .68 Annex ZA (normative) Normative references to international publications with their corresponding European publications 70 Page5 EN610764108:2002 6 801-4-67016 )E(2002:CEI CONNECTORS FOR ELECTRONIC EQUIPMENT Part 4-108: Printed board connectors with assessed quality Detail sp

33、ecification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 IEC SC 48B Connectors IEC 61076-4-108 QC 480301XX0009 Specification available f

34、rom: IEC Central Office or from the addresses shown on the inside cover. ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION in accordance with IEC 61076-1:1995. Cable connector system, 15 mm mounting pitch , for printed boards and backplanes, grid of 2,5 mm in accordance with IEC 60917-1

35、, integrated shielding function. Modular, five row connector, with shielding, ground contacts and coding features. Fixed board connectors 50 mm to 250 mm length Free cable connectors, 25 mm to 100 mm length. Performance levels (PL): 1, 2 Assessment level: G Information on the availability of compone

36、nts qualified to this detail specification is given in the qualified products list. IEC 395/02 Page6 EN610764108:2002)E(2002:CEI 801-4-67016 7 1 General data This specification describes adapter connectors of modular metric construction in conformance with IEC 60917-1. Interface connectors and cable

37、 connectors are used to make the electrical connection between a closed functional unit, for example a subrack, and its environment. The modular construction and the various connector styles enable a suitable connector to be used in equipment practices for electronic equipment such as data systems,

38、communications technology, telecommunications engineering and safety and security systems, power engineering and automation technology. Throughout this specification all dimensions are in millimetres. 1.1 Recommended method of mounting The connectors are used for connecting a printed board to a cabl

39、e (see also figure 1). The connectors are matched to the 2,5 mm contact grid. They can be mounted in an existing grid coordinate system horizontally or vertically or overlapping from module to module or from subrack to subrack. Care shall be taken to ensure that the contact areas of the male contact

40、s match the position of the female contacts. The engaging areas of the male contacts on the rear of a backplane correspond to the male contact dimensions according to IEC 61076-4- 100. NOTE In view of the large number of different mounting and application options, the contact quality between male an

41、d female contacts must be guaranteed. In the case of a subrack, for example, there are three mounting options: a) Rear of the backplane b) Module side of the backplane c) Front of the module Fixed connectors: For application on the rear of a backplane, a male connector body (preferably of flanged co

42、nstruction) is pushed over the rear plug-in connections of male contacts which have already been pressed in, for example over the terminals of a male connector according to IEC 61076-4-100, and secured in position. For use on the module side of a backplane, a male connector body can be mounted in th

43、e same way over press-in male contacts. Apart from flange mounting, the male connector body can also be fixed unsupported or directly to the male contacts. For application on the side of a module or at the rear of a backplane, an interface male connector (preferably without flange) can be pressed in

44、to metal-plated holes in the backplane. For application at the front of a module, a male connector body shall be equipped with male contacts which are mounted, for example pressed in, on the module printed board with terminals bent at right angles. Free connectors: The female connector equipped with

45、 female contacts is secured in a connector housing at which the cable is mounted with strain relief. The shielding braid of a cable shall be conductively connected to the connector housing consisting of shielded metal caps. The individual wires of a cable shall be connected at the female contacts di

46、rectly by means of Page7 EN610764108:2002 8 801-4-67016 )E(2002:CEI crimped or insulation displacement connections. 1.1.1 Maximum number of contacts Fixed board connector Table 1 Maximum number of contacts fixed connector System units (Height = Coordination dimension) 1 SU (25) 2 SU (50) 4 SU (100)

47、9 SU (225) 10 SU (250) Styles (see 2.2.1.1) J B;P;K D;L;R G;U H;V Signal contacts 41 82 164 369 410 Ground contacts 4 8 16 36 40 Free cable connector Table 2 Maximum number of contacts free cable connector System units (Height = Coordination dimension) 1 SU (25) 2 SU (50) 4 SU (100) Styles (see 2.2.

48、1.1) A B D Signal contacts 41 82 164 Ground contacts 4 8 16 Page8 EN610764108:2002)E(2002:CEI 801-4-67016 9 Free cable connector on rear side Fixed connector body Backplane Datum plane Fixed board connector Fixed board connector according to IEC 61076-4-100 Free cable connector on module side Module

49、 according to IEC 60917-2-2 Fixed board connector, rectangular connection Free cable connector on front side of PCB Row Row Row 1 2 3 IEC 396/02Installation options: 1 Rear of the backplane 2 Module side of the backplane 3 Front of the module Figure 1 Recommended installation Page9 EN610764108:2002 01 801-4-67016 )E(2002:CEI 1.2 Ratings and characteris