BS EN 61076-4-104-1999 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part modular connectors basic grid of 2 0m.pdf

《BS EN 61076-4-104-1999 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part modular connectors basic grid of 2 0m.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-4-104-1999 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part modular connectors basic grid of 2 0m.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61076-4-104: 1999 IEC 61076-4-104: 1999 Connectors for use in d.c. low-frequency analogue and digital high-speed data applications Part4-104: Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of2,0mm, withterminatio

2、ns on a multiple grid of0,5mm The European Standard EN61076-4-104:1999 has the status of a BritishStandard ICS 31.220.10BSEN61076-4-104:1999 This BritishStandard, having been prepared under the directionof the Electrotechnical Sector Committee, was publishedunder the authority ofthe Standards Commit

3、tee andcomes into effect on 15August1999 BSI 03-2000 ISBN 0 580 32660 8 National foreword This BritishStandard is the English language version of EN61076-4-104:1999. It is identical with IEC61076-4-104:1999. The UK participation in its preparation was entrusted by Technical CommitteeEPL/48, Electrom

4、echanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for chang

5、e, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From1January1997, all IEC publications have the number60000 added to the

6、 old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally in

7、clude an annex which lists normative references to international publications with their corresponding European publications. The BritishStandards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standa

8、rds Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standar

9、d does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to66, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendme

10、nts incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN61076-4-104:1999 BSI 03-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 61076-4-104 7ii blankEUROPEAN STANDARD NORM

11、E EUROPENNE EUROPISCHE NORM EN 61076-4-104 April 1999 ICS 31.220.10 English version Connectors for use in d.c. low-frequency analogue and digital high speed data applications Part4-104:Printedboard connectors with assessed quality Detail specification for two-part modular connectors, basicgrid of2,0

12、mm, with terminations on a multiplegridof0,5mm (IEC61076-4-104:1999) Connecteurs pour applications analogiques en courant continu et basse frquence et pour applications numriques utilisant des dbits levs pour le transfert des donnes Partie4-104: Connecteurs pour cartes imprimes sous assurance de la

13、qualit Spcification particulire pour modules de connecteurs en deux parties, au pas de base de2,0mm avec des connexions au pas multiplede0,5mm (CEI 61076-4-104:1999) Steckverbinder fr Gleichspannungs- undNiederfrequenzanwendungen sowie digitale Anwendungen mit hoher bertragungsrate Teil4-104: Steckv

14、erbinder fr gedruckte Schaltungen mit bewerteter Qualitt Bauartspezifikation fr indirekte, modulareSteckverbinder, Raster2,0mm, mitAnschlssen fr das Vielfache des Rasters0,5mm (IEC61076-4-104:1999) This European Standard was approved by CENELEC on 1999-04-01. CENELEC members are bound to comply with

15、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretaria

16、t or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the of

17、ficial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee f

18、or Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide forCENELEC members. Re

19、f.No.EN61076-4-104:1999EEN61076-4-104:1999 BSI 03-2000 2 Foreword The text of document48B/745/FDIS, future edition1 of IEC61076-4-104, prepared by SC48B, Connectors, of IEC TC48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC paralle

20、l vote and was approved byCENELEC as EN61076-4-104 on1999-04-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard

21、 IEC61076-4-104:1999 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword 2 1 General data 8 1.1 Recommended method of mounting 8 1.1.1 Minimum and maximum number of contact cavities 8 1.2 Ratings and characteristics 8 1.3 Normative references 8 1.4 Marking

22、 9 1.5 IEC type designation 10 1.6 Ordering information 10 2 Technical information 10 2.1 Definitions 10 2.2 Survey of styles and variants 11 2.3 Information on application 12 2.3.1 Complete connectors (pairs) 12 2.3.2 Fixed board connectors 12 2.3.3 Free board connectors 13 2.3.4 Accessories 13 2.3

23、.5 Shielding and grounding 14 2.3.6 Basic types of termination 14 2.4 Contact arrangements 14 3 Dimensional information 15 3.1 General 15 3.2 Isometric view and common features 15 3.2.1 Isometric view 16 3.2.2 Reference system 16 3.2.3 Height dimensions 17 3.2.4 Width dimensions 18 3.2.5 Depth dimen

24、sions 20 3.3 Engagement (mating) information 21 3.3.1 Engaging (mating) direction 21 3.3.2 Permissible displacement perpendicular to the engaging (mating) direction 22 3.3.3 Inclination 22 3.4 Fixed board connectors 23 3.4.1 Fixed board connector module, housing dimensions 23 3.4.2 Fixed board conne

25、ctor module dimensions 25 3.4.3 Terminations 27 3.5 Free board connectors 27 3.5.1 Free board connector module, housing dimensions 27 3.5.2 Free board connector module dimensions 28 latest date by which the ENhas to be implemented at national level by publication of an identical national standard or

26、 by endorsement (dop) 2000-01-01 latest date by which the national standards conflicting with the EN haveto be withdrawn (dow) 2002-04-01EN61076-4-104:1999 BSI 03-2000 3 Page 3.5.3 Terminations 31 3.6 Accessories 31 3.6.1 Coding system, style YV 31 3.6.2 Special contacts, styles ZX, ZY and ZZ 33 3.7

27、 Mounting information for fixed board connectors 34 3.7.1 Fixed board connector module housing, dimensions and positions of locating pegs, solder termination 34 3.7.2 Fixed board connector modules, signal and power contacts, solder termination 36 3.7.3 Fixed board connector module, special contacts,

28、 solder termination 38 3.7.4 Fixed board connector modules, signal and power contacts, press-in termination 38 3.8 Mounting information for free board connectors 40 3.8.1 Free board connector module housing, dimensions and position of location pegs and fixing studs 40 3.8.2 Free board connector modu

29、les, signal and power contacts, solder termination 42 3.8.3 Free board connector module, special contacts, solder termination 44 3.8.4 Free board connector modules, signal and power contacts, press-in termination 45 3.9 Gauges 46 3.9.1 Sizing gauges and retention force gauges 46 4 Characteristics 47

30、 4.1 Climatic categories 47 4.2 Electrical 47 4.2.1 Creepage and clearance distances 47 4.2.2 Voltage proof 47 4.2.3 Current carrying capacity 48 4.2.4 Initial contact resistance 48 4.2.5 Initial insulation resistance 48 4.3 Mechanical 49 4.3.1 Mechanical operation 49 4.3.2 Insertion and withdrawal

31、forces 49 4.3.3 Contact retention in insert 49 4.3.4 Static load, axial 49 5 Test schedule 49 5.1 General 49 5.1.1 Arrangement for contact resistance measurement 50 Page 5.1.2 Mounting arrangement for dynamic stress tests 51 5.1.3 Arrangement for testing static load, axial 51 5.1.4 Wiring of specime

32、ns 51 5.1.5 Arrangement for voltage proof 51 5.1.6 Arrangement for flammability (needle flame) test 52 5.2 Test schedule tables 52 5.2.1 Basic test schedule 52 5.2.2 Full test schedule 53 6 Quality assessment procedures 63 6.1 Qualification approval testing 63 6.1.1 Method 1 63 6.1.2 Method 2 63 6.2

33、 Quality conformance inspection 64 6.2.1 Lot-by-lot tests 64 6.2.2 Periodic tests 65 6.3 Delayed delivery, re-inspection 66 Annex ZA (normative) Normative referencestointernational publications withtheircorresponding European publications Inside back cover Figure 1 Overall length(s) of complete conn

34、ectors 13 Figure 2 Isometric view 16 Figure 3 Height dimensions 17 Figure 4 Width dimensions Housing shape1 18 Figure 5 Width dimensions Housing shape2 19 Figure 6 Depth dimensions 20 Figure 7 Engaging (mating) direction 21 Figure 8 Housing shapes1 and2 22 Figure 9 Inclination 22 Figure 10 Dimension

35、s of fixed connector modulehousings, styles AD, AE, DD, DE, GDandGE 23 Figure 11 Dimensions of fixed connector modulehousings, styles BD, BE, ED, EE, HDandHE 24 Figure 12 Dimensions of fixed signal connectormodule, style AE 25 Figure 13 Dimensions of fixed power module,style DE 26 Figure 14 Dimensio

36、ns of fixed special connectormodule, style GD 27EN61076-4-104:1999 BSI 03-2000 4 Page Figure 15 Dimensions of free board connectormodule housings, styles PD, PE, RD,RE,TD and TE 28 Figure 16 Position of contact point in the femalecontact area 29 Figure 17 Dimensions of free signal connectormodule, s

37、tyle PE 29 Figure 18 Dimensions of free power module,styleRE 30 Figure 19 Dimensions of free special connectormodule, style TD 30 Figure 20 Application of an optional codingsystem 31 Figure 21 Example of contact sequencing versusoptional coding 31 Figure 22 Optional coding keys 32 Figure 23 Housing

38、dimensions and positionsoflocating pegs for all module styleswithsolder terminations 34 Figure 24 Recommended printed board layoutforsolder to board version, component side 35 Figure 25 Dimensions of fixed connector modules,signal and power contacts with soldertermination 36 Figure 26 Recommended pr

39、inted board layoutforsolder to board version, component side 37 Figure 27 Dimensions of a fixed board connectormodule, special contacts, solder termination 38 Figure 28 Recommended printed board layoutforsolder to board version, component side 38 Figure 29 Dimensions of fixed board connectormodule,

40、signal and power contacts, press-in termination 39 Figure 30 Recommended printed board layoutforpress-in termination, component side 40 Figure 31 Mounting information of free boardconnector module housing, dimensions andposition of locating pegs and fixing studs 41 Figure 32 Recommended printed boar

41、d layout,component side 42 Figure 33 Mounting for free board connectormodule, signal and power contacts, soldertermination 43 Figure 34 Recommended printed board layoutforsolder to board version, component side 43 Page Figure 35 Mounting for free board connectormodule, special contacts, solder termi

42、nation 44 Figure 36 Recommended printed board layoutforsolder to board version, component side 44 Figure 37 Mounting for free board connectormodule, signal and power contacts, press-in termination 45 Figure 38 Recommended printed board layoutforpress-in termination, component side 46 Figure 39 Sizin

43、g and retention force gauges 46 Figure 40 Current carrying capacity 48 Figure 41 Arrangement for contact resistancemeasurement 50 Figure 42 Arrangement for dynamic stress test 51 Figure 43 Arrangement for voltage proof test 51 Figure 44 Arrangement for needle flame flammability test 52 Table 1 Numbe

44、r of contact cavities 8 Table 2 Styles and variants 12 Table 3 Basic types of termination 14 Table 4 Contact loading 15 Table 5 Contact level and rows 15 Table 6 Isometric view and common features 15 Table 7 Height dimensions 17 Table 8 Width dimensions as in Figure 4 andFigure 5 18 Table 9 Depth di

45、mensions 20 Table 10 Contact length per contact level 21 Table 11 Fixed board connector module widthdimensions 24 Table 12 Free connector dimensions of Figure 15 27 Table 13 Survey of special contacts,4,8mm diameter 33 Table 14 Fixed board connector, mountingwidthdimensions 35 Table 15 Solder post l

46、engths 37 Table 16 Press-in post lengths (after assembly) 40 Table 17 Press-in hole dimensions 40 Table 18 Length of fixing studs and board milled-down dimensions 42EN61076-4-104:1999 BSI 03-2000 5 Page Table 19 Dimensions of gauges 47 Table 20 Performance levels 47 Table 21 Creepage and clearance d

47、istances 47 Table 22 Initial contact resistance, maximum 48 Table 23 Mechanical operations 49 Table 24 Insertion and withdrawal forces 49 Table 25 Number of test specimens 50 Table 26 Test group P 53 Table 27 Test group AP 54 Table 28 Test group BP 57 Table 29 Test group CP 59 Table 30 Test group DP

48、 60 Table 31 Test group EP 61 Table 32 Test group FP 62 Table 33 Qualification approval testing, method1 63 Table 34 Lot-by-lot tests 64 Table 35 Periodic tests 65 Table 36 Re-inspection 666 blankEN61076-4-104:1999 BSI 03-2000 7 IEC SC48B: CONNECTORS Specification available from: IEC Central Office

49、or from the addresses shown on the inside cover Electronic components of assessed quality IEC61076-4-104 QC480301XX0005 DETAIL SPECIFICATION in accordance with IEC61076-1:1995. IEC61076-4-001 See3.2.1 for isometric view See3.4, 3.5 and3.6 for dimensions Two-part modular connectors, for printed boards and backplanes, basic grid2,0mm, with terminations on a multiple grid of0,5mm St