BS EN 61076-4-001-1997 Connectors with assessed quality for use in d c low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail.pdf

《BS EN 61076-4-001-1997 Connectors with assessed quality for use in d c low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-4-001-1997 Connectors with assessed quality for use in d c low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61076-4-001: 1997 IEC 1076-4-001: 1996 QC480301: 1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications Part 4: Printed board connectors Section 001: Blank detail specification The European Standard EN 61076-4

2、-001:1996 has the status of a BritishStandard ICS 31.220.10BSEN61076-4-001:1997 This British Standard, having been prepared under the directionof the ElectrotechnicalSector Board, was published under the authorityof the Standards Boardand comes intoeffecton 15May1997 BSI 10-1999 The following BSI re

3、ferences relate to the work on this standard: Committee reference EPL/48/2 Announced in BSI Update March1997 ISBN 0 580 27355 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee EPL/48, Electromechanical components for elec

4、tronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, upon which the following bodies were represented: Association of Manufacturers Allied to the Electrical and Electronic Industry (BEAMA Ltd.) British Telecommunications plc BSI Quality Assurance Federation of the Electro

5、nics Industry Ministry of Defence Premises Cabling Association Amendments issued since publication Amd. No. Date CommentsBSEN61076-4-001:1997 BSI 10-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 61076-4-001 5 List of references Inside back

6、coverBSEN61076-4-001:1997 ii BSI 10-1999 National foreword This Section of BSEN61076has been prepared by Subcommittee EPL/48/2, and is the English language version of EN61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applicati

7、ons Part 4: Printed board connectors Section 001: Blank detail specification, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1076-4-001:1996, published by the International Electrotechnical Commission (IEC). A British Standard does not pur

8、port to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard

9、EN 60068-2-60:1996 (IEC 68-2-60:1995) BS EN 60068 Environmental testing- BS EN 60068-2-60:1996 Test Ke. Flowing mixed gas corrosion test BS EN 61076 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications EN 61076-1:1995 (IEC 1076-1:1995)

10、 BS EN 61076-1:1996 Generic specification EN 61076-4:1996 (IEC 1076-4:1995) BS EN 61076-4:1997 Sectional specification Printed board connectors Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 64, an inside back cover and a b

11、ack cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-4-001 November 1996 ICS 31.220.10 Descriptors: Printed board con

12、nectors with assessed quality, blank detail specification Englishversion Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications Part 4: Printed board connectors Section001: Blank detail specification (IEC 1076-4-001:1996) Connecteurs sou

13、s assurance de la qualit,pourutilisation dans le cadre dapplications analogiques en courant continuet basse frquence et dans le cadredapplications numriques utilisantdesdbits levs pour le transfertdesdonnes Partie4:Connecteurspour cartes imprimes Section001:Spcification particulire cadre (CEI 1076-4

14、-001:1996) Steckverbinder mit bewerteter Qualitt frGleichspannungs- und Niederfrequenzanwendungen sowie digitaleAnwendungen mit hoher bertragungsrate Teil 4: Steckverbinder fr gedruckte Schaltungen Hauptabschnitt 001: Vordruck fr Bauartspezifikation (IEC 1076-4-001:1996) This European Standard was a

15、pproved by CENELEC on 1996-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n

16、ational standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lang

17、uage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, S

18、witzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No.

19、 EN 61076-4-001:1996 EEN61076-4-001:1996 BSI 10-1999 2 Foreword The text of document48B/465/FDIS,future edition1of IEC1076-4-001, prepared by SC48B, Connectors, of IECTC48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote

20、 and was approved by CENELEC as EN61076-4-001on 1996-10-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex A, Annex B and Annex ZA are normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the Inter

21、national Standard IEC1076-4-001:1996was approved by CENELEC as a European Standard without any modification. Contents Page Foreword 2 Introduction 5 1 General data 7 1.1 Recommended method of mounting 7 1.1.1 Number of contacts or contact cavities 7 1.2 Ratings and characteristics 7 1.3 Normative re

22、ferences 8 1.4 Marking 8 1.5 IEC type designation 10 1.6 Ordering information 10 2 Technical information 12 2.1 Definitions 12 2.2 Survey of styles and variants 12 2.3 Information on application 12 2.3.1 Complete connectors (pairs) 12 2.3.2 Fixed board connectors 12 2.3.3 Free board connectors 12 2.

23、3.4 Accessories 14 2.3.4.1 Special contacts 14 2.3.4.2 Coding devices 14 2.3.4.3 Mounting devices 14 2.3.5 Shielding/grounding 14 2.3.6 Basic type of terminations 14 2.4 Contact arrangements 14 3 Dimensional information 16 3.1 General 16 3.2 Isometric view and common features 16 3.2.1 Common feature

24、s 18 3.2.2 Reference system 18 3.2.3 Height dimensions 18 3.2.4 Width dimensions 18 3.2.5 Depth dimensions 18 3.3 Engagement (mating) information 20 3.3.1 Electrical engagement length 20 3.3.1.1 Contact levels and sequencing 20 3.3.2 Perpendicular to the engaging (mating) direction 20 3.3.3 Inclinat

25、ion 20 3.4 Fixed board connectors 20 3.4.1 Dimensions 20 3.4.2 Terminations 20 3.5 Free board connectors 22 3.5.1 Dimensions 22 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop)1997-07-01 latest date by which

26、the national standards conflicting with the EN have to be withdrawn (dow)1997-07-01EN61076-4-001:1996 BSI 10-1999 3 Page 3.5.2 Terminations 22 3.6 Accessories 22 3.7 Mounting information for fixed board connectors 22 3.7.1 Hole pattern on printed boards 22 3.7.2 Mounting on panels 24 3.8 Mounting in

27、formation for free board connectors 24 3.9 Gauges 24 3.9.1 Sizing gauges and retention force gauges 24 3.9.2 Mechanical operation, engaging/separating force, insertion/withdrawal force gauges 26 3.9.3 Probes 26 3.9.4 Contact resistance gauge 26 3.9.5 Test panel (for voltage proof test) 26 4 Characte

28、ristics 28 4.1 Climatic category 28 4.2 Electrical 28 4.2.1 Creepage and clearance distances 28 4.2.2 Voltage proof 28 4.2.3 Current-carrying capacity 30 4.2.4 Contact resistance 30 4.2.5 Insulation resistance 30 4.3 Mechanical 30 4.3.1 Mechanical operation 30 4.3.2 Engaging and separating forces (o

29、r insertion and withdrawal forces) 32 4.3.3 Contact retention in insert 32 4.3.4 Polarizing method 32 5 Test schedule 34 5.1 General 34 5.1.1 Arrangement for contact resistance measurements 34 5.1.2 Arrangement for dynamic stress tests 34 5.1.3 Arrangement for testing static load, axial 34 5.1.4 Wir

30、ing of specimens 34 5.2 Test schedules 36 5.2.1 Basic test schedule 36 5.2.2 Full test schedule 38 5.2.2.1 Test group P Preliminary 38 5.2.2.2 Test group AP Dynamic/climatic 40 5.2.2.3 Test group BP Mechanical endurance 44 5.2.2.4 Test group CP Moisture 48 Page 5.2.2.5 Test group DP Electrical load

31、48 5.2.2.6 Test group EP Mechanical resistivity 50 5.2.2.7 Test group FP Chemical resistivity 52 5.2.2.8 Test group GP Connections 52 5.2.2.9 Test group HP Additional 52 6 Quality assessment procedures 54 6.1 Qualification approval testing 54 6.1.1 Method 1 54 6.1.2 Method 2 54 6.2 Quality conforman

32、ce inspection 56 6.2.1 Lot-by-lot tests 56 6.2.2 Periodic tests 58 6.3 Delayed delivery, re-inspection 60 Annex A (normative) Requirements for application to mechanical structures 62 Annex B (normative) New tests and additional test phases 63 Annex ZA (normative) Normative references to internationa

33、l publications with their corresponding European publications 64 Figure A.1 Plug-in unit dimensions 63 Table 1 Styles and variants 13 Table 2 Isometric view and common features 17 Table 3 Performance levels 28 Table 4 Creepage and clearance distances 29 Table 5 Basic tests 37 Table 6 Test group P 39

34、 Table 7 Test group AP 41 Table 8 Test group BP 45 Table 9 Test group CP 49 Table 10 Test group DP 49 Table 11 Test group EP 51 Table 12 Test group FP 53 Table 13 Test group GP 53 Table 14 Test group HP 53 Table 15 Qualification approval tests 55 Table 16 Lot-by-lot tests 57 Table 17 Periodic tests

35、59 Table 18 Re-inspection 61 Table A.1 Dimensions required in accordance with IEC 917-2-2 624 blankEN61076-4-001:1996 BSI 10-1999 5 Introduction In prior years, IEC subcommittee48B had prepared detail specifications as part of a two-level document system. When the IECQ system was introduced, SC48B w

36、as urged to consider changing to the four-level specification system as described in IEC Guide102. This blank detail specification is part of that four-level document system. This blank detail specification is a supplementary document to the sectional specification IEC1076-4and contains requirements

37、 for style, lay-out and minimum content of detail specifications. For the scope and definition of this blank detail specification, see1.2.2 of IEC1076-1and 1.1 of IEC1076-4. Detail specifications not complying with these requirements shall not be considered as being in accordance with the IECQ syste

38、m, nor shall they be so described. The complete requirements for the printed board connectors described herein should correspond to this blank detail specification and the current issues of IEC1076-1and IEC1076-4. In the preparation of detail specifications, the contents of 1.2.3 of IEC1076-1should

39、be taken into account.EN61076-4-001:1996 6 BSI 10-1999 Guidance notes The following pages give a recommended layout of a detail specification. The contents of this page give guidance on the information which should, wherever possible, be given on the first page of a detail specification (see IEC Gui

40、de 102). The numbers between brackets on the first page of the detail specification correspond to the following information: Identification of the detail specification 1 The International Electrotechnical Commission or the national standards organisation under whose authority the detail specificatio

41、n is drafted. 2 The IEC or national standards number of the detail specification, date of issue, and any further information required by the national system. 3 The number and issue of the IEC or national generic specification. 4 The number and issue of the IEC blank detail specification. Identificat

42、ion of the connector 5 A short description of the type of connector. 6 Information on typical construction of the connector; for example it should be stated whether the connector is suitable for mounting on printed boards. 7 Outline drawing, preferably of isometric or similar projection, from which

43、the connector may be clearly identified. 8 Information on performance level(s) and assessment level(s) specified in the document. 9 Reference data on the most important properties, to allow comparison between the various connector types.EN61076-4-001:1996 BSI 10-1999 7 1 General data 1.1 Recommended

44、 method of mounting See Annex A for guide on the application of these connectors in mechanical structures according to IEC917. 1.1.1 Number of contacts or contact cavities 1.2 Ratings and characteristics 1 Detail specification number 2 Generic specification number Electronic components of assessed q

45、uality in accordance with: 3 Blank detail specification number 4 Outline drawing 7 Product description 5 6 8 Performance level(s): Assessment level(s): Combination of performance levels and assessment levels: 9 Information on the availability of components qualified to this detail specification is g

46、iven in the qualified products list. Rated voltage Current rating at 70 C Insulation resistance Climatic category Printed board thickness Contact spacingEN61076-4-001:1996 8 BSI 10-1999 Guidance notes 1.3 Normative references 1.4 Marking The marking of the connector and the package shall be in accor

47、dance with 2.6 of IEC 1076-4.EN61076-4-001:1996 BSI 10-1999 9 1.3 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC1076-4. At the time of publication, the editions indicated were valid. All no

48、rmative documents are subject to revision, and parties to agreements based on this section of IEC1076-4are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid Internati

49、onal Standards. IEC 68-2-60TTD:1990, Environmental testing Part 2: Tests Test Ke: Corrosion tests in artificial atmosphere at very low concentration of polluting gas(es). IEC 1076-1:1995, Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications Part 1: Generic specification. IEC 1076-4:1995, Connectors with assessed quality, for use in d.c., low-frequency analogue and in dig