BS EN 60893-3-3-2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requa.pdf

《BS EN 60893-3-3-2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requa.pdf》由会员分享，可在线阅读，更多相关《BS EN 60893-3-3-2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requa.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 60893-3-3:2004 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individua

2、l materials Requirements for rigid laminated sheets based on melamine resins The European Standard EN 60893-3-3:2004 has the status of a British Standard ICS 29.035.01 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSIBS EN 60893-3-3:2

3、004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 February 2004 BSI 26 February 2004 ISBN 0 580 43501 6 National foreword This British Standard is the official English language version of EN 60893-3-3:2004. It is identical with IEC 60893

4、-3-3:2003. It supersedes BS EN 60893-3-3:1995 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: A list of organizations represented on this

5、subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by usin

6、g the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity fr

7、om legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the

8、 UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. D

9、ate Comments Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60893-3-3 NORME EUROPENNE EUROPISCHE NORM January 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation E

10、lectrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60893-3-3:2004 E ICS 29.035.01 Supersedes EN 60893-3-

11、3:1995English version Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003) Matriaux isolants Stratifis indus

12、triels rigides en planches base de rsines thermodurcissables usages lectriques Partie 3-3: Spcifications pour matriaux particuliers Prescriptions pour stratifis rigides en planches base de rsine mlamine (CEI 60893-3-3:2003) Isolierstoffe Tafeln aus technischen Schichtpress- stoffen auf der Basis war

13、mhrtender Harze fr elektrotechnische Zwecke Teil 3-3: Bestimmungen fr einzelne Werkstoffe Anforderungen fr Tafeln aus Schichtpressstoffen auf der Basis von Melaminharzen (IEC 60893-3-3:2003) This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to comply with the CE

14、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to

15、 any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official

16、versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sw

17、eden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI Foreword The text of document 15C/1523/FDIS, future edition 2 of IEC 60893-3-3, prepared by SC 15C, Specifications, of IEC TC 15, Insulating mater

18、ials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60893-3-3 on 2003-12-01. This European Standard supersedes EN 60893-3-3:1995. In this revision of the EN 60893 series of specifications, new material types have been included, changes have been made to the propert

19、y requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document IEC/TR 60893-4: Typical values. The following dates were fixed: latest date by which the EN has to

20、be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-12-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Inte

21、rnational Standard IEC 60893-3-3:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60893-3-1 NOTE Harmonized as EN 60893-3-1:2003 (not modified). _ Page2 EN608933

22、3:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references5 3 Designation5 4 Requirements.6 Annex ZA (normative) Normative references to international publications with their corre

23、sponding European publications11 Bibliography12 Page3 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI INTRODUCTION This part of IEC 60893 is one of a series, which deals with industrial rigid laminated sheets based on

24、thermosetting resins for electrical purposes. This series consists of four parts: Part 1: Definitions, designations and general requirements (IEC 60893-1) Part 2: Methods of test (IEC 60893-2) Part 3: Specifications for individual materials (IEC 60893-3) Part 4: Typical values (IEC 60893-4) IEC 6089

25、3-3-3 contains one of the specification sheets comprising Part 3, as follows: Sheet 3: Requirements for rigid laminated sheets based on melamine resins Page4 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI INSULATING M

26、ATERIALS INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES Part 3-3: Specifications for individual materials Requirements for rigid laminated sheets based on melamine resins 1 Scope This part of IEC 60693 gives the requirements for industrial rigid laminated she

27、ets for electrical purposes based on melamine resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific appl

28、ication should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editio

29、n cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60893-1: , Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general require

30、ments 1IEC 60893-2:2003, Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test 3 Designation The sheets covered by this Specification are classified into types, which differ in reinforcement employed and in their distinguishing properties. Th

31、e sheets are designated by the IEC standard number, a two-letter abbreviation denoting the resin, a second two-letter abbreviation, denoting the reinforcement, a serial number, nominal thickness x width x length in millimetres. 1To be published Page5 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchan

32、ge China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI Example of designation: Industrial rigid laminated sheet of type MF CC 201 with a nominal thickness of 10 mm, 500 mm wide, 1 000 mm long. Sheet IEC 60893-3-3 MF CC 201 10 x 500 x 1 000. The following abbreviations are u

33、sed in this Part 3 sheet: Type of resin Types of reinforcement MF Melamine CC Woven cotton cloth GC Woven glass cloth 4 Requirements In addition to the general requirements given in IEC 60893-1, the laminated sheets shall also comply with the dimensional requirements given in Tables 2, 3 and 4 as we

34、ll as with the other requirements given in Tables 5, 6 and 7. Table 1 Types of industrial rigid laminated sheets based on melamine resins Laminate type Resin Reinforcement Serial number Applications and distinguishing characteristics aCC 201 Mechanical and electrical applications. Arc and tracking r

35、esistant (coarse weave) bMF GC 201 Mechanical and electrical applications. High mechanical strength. Arc and tracking resistant. Low flammability aIt should not be inferred from the contents of Table 1 that laminates of any particular type are necessarily unsuitable for applications other than those

36、 listed for them, or that specific laminates will be suitable for all applications within the wide description given. bFabric weaves of type PC and CC reinforcements. Mass per unit area g/m 2Thread count cm -1Coarse weave 130 30 These values are only for information. They are not to be considered as

37、 specification values. In general, the finer weave materials have better machining characteristics. Page6 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI Table 2 Tolerances on thickness (test method: see 4.1 of IEC 608

38、93-2) Tolerance (all types) mm Nominal thickness mm MF CC 201 MF GC 201 0,4 0,5 0,6 0,10 0,12 0,13 0,8 1,0 1,2 0,19 0,20 0,22 0,16 0,18 0,21 1,5 2,0 2,5 0,24 0,26 0,29 0,24 0,28 0,33 3,0 4,0 5,0 0,31 0,36 0,42 0,37 0,45 0,52 6,0 8,0 10,0 0,46 0,55 0,63 0,60 0,72 0,82 12,0 14,0 16,0 0,70 0,78 0,85 0,

39、94 1,02 1,12 20,0 25,0 30,0 0,95 1,10 1,22 1,30 1,50 1,70 35,0 40,0 45,0 1,34 1,45 1,55 1,95 2,10 2,30 50,0 1,65 2,45 Where the nominal thickness is not one of the preferred thicknesses listed, then the tolerance for the next highest preferred nominal thickness shall apply. NOTE Other tolerances may

40、 be agreed between the supplier and the purchaser. Table 3 Flatness (test method: see 4.2 of IEC 60893-2) Length of straight edge mm Thickness d mm 1 000 500 3 d 6 10 2,5 6 d 8 8 2,0 8 d 6 1,5 Page7 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004

41、, Uncontrolled Copy, (c) BSI Table 4 Tolerances on width of cut strips (minus tolerances only) Nominal width, all types mm Nominal thickness d mm 3 b 50 50 b 100 100 b 160 160 b 300 300 b 500 500 b 600 0,4 0,5 0,6 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,6 0,6 0,6 1,0 1,0 1,0 1,5 1,5 1,5 0,8 1,0 1,2 0,

42、5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,6 0,6 1,0 1,0 1,0 1,2 1,0 1,0 1,2 1,5 2,0 2,5 0,5 0,5 0,5 0,5 0,5 1,0 0,5 0,5 1,0 1,0 1,0 1,5 1,2 1,2 2,0 1,2 1,5 2,5 3,0 4,0 5,0 0,5 0,5 0,5 1,0 2,0 2,0 1,0 2,0 2,0 1,5 3,0 3,0 2,0 4,0 4,0 2,5 5,0 5,0 NOTE Unilateral, all-negative tolerances are normally applied

43、to the width of the cut strips, and are given in the above table. Other tolerances may be agreed upon between purchaser and supplier. Page8 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI Table 5 Property requirements

44、Type Property Test method in IEC 60893- 2 Subclause Unit Minimum or maximum Nominal thickness of sheet to which test is applicable mm MF CC 201 MF GC 201 Remarks Flexural strength 5.1 MPa Minimum 1,5 70 240 Charpy impact strength parallel to laminations 5.4.2 kJ/m 2Minimum 5 3,0 30 Izod impact stren

45、gth parallel to laminations 5.4.3 kJ/m 2Minimum 5 2,5 31 Conformance with the requirements for either the Charpy or Izod test constitutes, in this respect, conformance with this specification. Electric strength at 90 C in oil perpendicular to laminations 6.1 kV/mm Minimum 3 See Table 6 Breakdown vol

46、tage at 90 C in oil parallel to laminations 6.1 kV Minimum 3 15 15 Insulation resistance after immersion in water 6.3 M Minimum All 1 x 10 1 1 x 10 2Proof tracking index 6.4 Minimum 3 500 500 Flammability 7.2 Category 3 V-0 V-0 The small-scale laboratory test used in this standard for assigning a fl

47、ammability category is primarily for monitoring consistency of production of laminates. The results so obtained should not in any circumstances be considered as an overall indication of the potential fire hazards presented by these laminates under actual conditions of use. Water absorption 8.2 mg Ma

48、ximum All See Table 7 Page9 EN6089333:2004Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 April 2004, Uncontrolled Copy, (c) BSI Table 6 Electric strength at 90 C in oil, perpendicular to laminations (1 min proof test or 20 s step-by-step test) a(kV/mm) Mean measured thi

49、ckness of test specimen bmm Type 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,2 1,5 1,8 2,0 2,2 2,4 2,5 2,6 2,8 3,0 MF CC 201 6,6 6,3 6,1 5,8 5,6 5,3 4,9 4,5 4,3 4,2 4,1 4,1 4,1 4,0 4,0 MF GC 201 9,1 8,6 8,2 7,9 7,6 7,3 7,0 6,6 6,1 5,6 5,4 5,3 5,2 5,2 5,2 5,1 5,0 aThe two tests are alternatives. A material meeting either requirement shall be deemed to c