BS EN 60745-2-12-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators《手持式电动工具 安全性 混凝土振捣器的特殊要求》.pdf

《BS EN 60745-2-12-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators《手持式电动工具 安全性 混凝土振捣器的特殊要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60745-2-12-2009 Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators《手持式电动工具 安全性 混凝土振捣器的特殊要求》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHand-held motor-operated electric tools Safety Part 2-12: Particular requirements for concrete vibratorsBS EN 60745-2-12:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS

2、, 13/06/2010 02:16, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60745-2-12:2009. It was derived by CENELEC from IEC 60745-2-12:2003, incorporating amendment 1:2008. It supersedes BS EN 60745-2-12:2003+A1:2009, which will be withdrawn on 1 April 201

3、2.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeCPL/116, Portable motor-operated tools.A list of organizations represented on this committee ca

4、n be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 65765 8 ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obliga

5、tions.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2010Amendments/corrigenda issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60745-2-12:2009The start and finish of text introduced or altered by amendmen

6、t is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60745

7、-2-12 NORME EUROPENNE EUROPISCHE NORM July 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of explo

8、itation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60745-2-12:2009 E ICS 25.140.20 Supersedes EN 60745-2-12:2003 + A1:2009English version Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators (IEC 60745-2-12

9、:2003 + A1:2008, modified) Outils lectroportatifs moteur - Scurit - Partie 2-12: Rgles particulires pour les vibreurs bton (CEI 60745-2-12:2003 + A1:2008, modifis) Handgefhrte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-12: Besondere Anforderungen fr Innenrttler (IEC 60745-2-12:2003 + A1:

10、2008, modifiziert) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

11、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

12、nsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany

13、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c)

14、 BSIForeword The text of document 61F/511/FDIS, future edition 2 of IEC 60745-2-12, prepared by SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools) was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60745-2-12 on 2003-09-23. The text

15、of document 61F/737/FDIS, future amendment 1 to IEC 60745-2-12:2003, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60745-2-12:2003 on 2009-04-01. A draft amendment (prAA), containing a number of common modifications prepared by the Technical Committ

16、ee CENELEC TC 116, Safety of hand-held motor-operated electric tools, with the aim of having the standard listed in the OJEC as supporting the new MD 2006/42/EC, was submitted to the Unique Acceptance Procedure. The combined texts were approved by CENELEC as a new edition of EN 60745-2-12 on 2009-07

17、-01. This European Standard supersedes EN 60745-2-12:2003 + A1:2009. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-01-01 latest date by which the national standards con

18、flicting with the EN have to be withdrawn (dow) 2012-04-01 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this s

19、tandard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European

20、Commission and the European Free Trade Association and supports the essential requirements of EC Directive 2006/42/EC. See Annex ZZ. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive con

21、cerned. Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this standard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. This Part 2-12 is to be used in conjunction with EN 60745-1:2009. When this st

22、andard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. NOTE In this standard, the following print types are used: - requirements: in ro

23、man type; - test specifications: in italic type; - notes: in smaller roman type. _ BS EN 60745-2-12:2009EN 60745-2-12:2009 (E) 2 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSIEndorsement notice The text of the International Standard IEC 60745-2-12

24、:2003 +A1:2008 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60745-2-12:2009EN 60745-2-12:2009 (E) 3Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSIThis page deliberately set blankLicensed Copy: Wang Bin, ISO

25、/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSIHAND-HELD MOTOR-OPERATED ELECTRIC TOOLSSAFETY Part 2-12: Particular requirements for concrete vibrators1ScopeThis clause of Part 1 is applicable except as follows:Addition:This standard applies to concrete vibrators.2 Normative r

26、eferencesThis clause of Part 1 is applicable.3 Terms and DefinitionsThis clause of Part 1 is applicable, except as follows:3.2.9 Replacement:normal loadload obtained when the tool is operated continuously, the hose and vibrator bottle beingattached to the tool as for normal use. During the operation

27、 the vibrator bottle is immersedcentrally in a container filled with an amount of water corresponding to at least 50 timesthe volume of the vibrator bottle.The dimensions of the container are such that the diameter is about 50 % of the height of thewater inside the container.The height of the contai

28、ner is such that no water can splash out during the testAddition:3.101concrete vibratortool intended for compacting concrete. The active part (vibrator bottle) of the vibrator performslow-amplitude vibrations and is immersed into the mass of concrete to be vibrated.Concrete vibrators may be of one o

29、f the following designs:!Text deleted“! “a) the motor and the vibrating mechanism are inside the vibrator bottle to which the part containing the mains switch or a power converter and switch handle assembly is connected by means of a long flexible hose containing the interconnecting cable. The long

30、flexible hose may be used as the handle (see Figure 101); b) only the vibrator mechanism is inside the vibrator bottle to which a separate portable unit, comprising the motor, the handle and the mains switch, is connected by means of a long flexible hose containing a flexible shaft (see Figure 102)

31、!“BS EN 60745-2-12:2009EN 60745-2-12:2009 (E) 5 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSI4 General requirementsThis clause of Part 1 is applicable.5 General conditions for the testsThis clause of Part 1 is applicable.6 Environmental requireme

32、nts This clause of Part 1 is applicable except as follows: 6.1.2.4 Modification: Concrete vibrators are held and used as specified in 6.1.2.5. 6.1.2.5 Modification: Concrete vibrators are tested at normal load as specified in 3.2.9. The container shall be placed on the ground and positioned such tha

33、t the tool is located under the top microphone. 6.2 Vibration 6.2.6.3 Modification: Concrete vibrators are tested under the operating conditions specified in 6.1.2.5. 7 ClassificationThis clause of Part 1 is applicable.8 Marking and instructionsThis clause of Part 1 is applicable.9 Protection agains

34、t access to live partsThis clause of Part 1 is applicable.10 StartingThis clause of Part 1 is applicable, except as follows:10.1 Addition:The test is made at an ambient temperature of (10 1) C after the concrete vibrator hasbeen kept at this temperature for at least 2 h.BS EN 60745-2-12:2009EN 60745

35、-2-12:2009 (E) 6 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSI11 Input and currentThis clause of Part 1 is applicable.12 HeatingThis clause of Part 1 is applicable, except as follows:12.4 Replacement:The tool is operated at normal load for 30 min

36、. The temperature rises are measured at theend of the 30 min.13 Leakage currentThis clause of Part 1 is applicable.14 Moisture resistanceThis clause of Part 1 is applicable, except as follows:14.1 Replacement of the first paragraph: For design a) as defined in 3.101, the enclosure of all parts and t

37、he cable entry shall be IPX7. During the relevant test of this subclause, the part containing the switch or the power converter and switch handle assembly is placed in the normal position of use, the hose, if any, being attached correctly to it. For design b) as defined in 3.101, the motor unit shal

38、l be IPX4. During the relevant test of this subclause, the motor unit is placed in the most unfavourable position occurring during normal use. The isolating transformer or the motor-generator shall be IPX4. !“15 Electric strengthThis clause of Part 1 is applicable.16 Overload protection of transform

39、ers and associated circuitsThis clause of Part 1 is applicable.17 EnduranceThis clause of Part 1 is applicable, except as follows:BS EN 60745-2-12:2009EN 60745-2-12:2009 (E) 7 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSI17.2 Replacement:The tool

40、 is operated under the conditions specified for normal load for two periods of 12 hat 1,1 times rated voltage and for two periods of 12 h at 0,9 times rated voltage. The restingtime between each of these periods of 12 h shall be at least 2 h.The tool may be switched on and off by means of a switch o

41、ther than that incorporatedin the tool.During this test, replacement of the carbon brushes is allowed, and the tool is oiled andgreased as in normal use.If the temperature rise of any part of the tool exceeds the temperature rise determined duringthe test of 12.1, forced cooling or rest periods are

42、applied, the rest periods being excludedfrom the specified operating time.During these tests, overload protection devices shall not operate.18 Abnormal operationThis clause of Part 1 is applicable, except as follows:18.12 This subclause is not applicable. Replace the last paragraph of 18.101 by the

43、following: After the concrete vibrator has been allowed to cool down to approximately room temperature, it shall withstand an electric strength test as specified in 15.2. For concrete vibrators having the motor in the bottle, the test voltage across basic insulation is, however, reduced to 1 000 V f

44、or tools other than those of class III. !“18.101 The concrete vibrator is assembled as in normal use and is operated at rated voltageor the at the upper limit of the voltage range, starting from room temperature, the hose andthe vibrator bottle being held vertically in free air.The period of operati

45、on is:2 min for concrete vibrators provided with a mains switch such that the motor isswitched off automatically as soon the actuating member of the switch isreleased;15 min for other concrete vibrators, including those with an arrangement to lockthe mains switch in the ON position.The test is consi

46、dered to be terminated when a protective device, if any, operates.After the concrete vibrator has been allowed to cool down to approximately room temperature,it shall withstand an electric strength test as specified in 15.3. For concrete vibrators havingthe motor in the bottle, the test voltage acro

47、ss basic insulation is, however, reduced to1 000 V for tools other than those of class III.19 Mechanical hazardsThis clause of Part 1 is applicable.BS EN 60745-2-12:2009EN 60745-2-12:2009 (E) 8 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/06/2010 02:16, Uncontrolled Copy, (c) BSI20 Mech

48、anical strengthThis clause of Part 1 is applicable, except as follows:20.3 Addition:This test is done only with parts containing the motor or the mains switch which are held inthe hand or are operated by hand in normal use.20.101 The mechanical connections between the hose and the part containing th

49、e mainsswitch and those between the hose and the vibrator bottle shall be reliable.Compliance is checked by applying, on the concrete vibrator assembled as in normal use,between the vibrator bottle and the part containing the mains switch, for 1 min, a pull innewtons (N) equal to 200 times the mass of the vibrator bottle in kilograms, but not exceeding1 200 N.During the test, the electrical connections shall not be exposed to mechanical stress. After thetest, the hose shall not have moved noticeably at the pla