BS EN 60684-3-300-2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving braided uncoated《.pdf

《BS EN 60684-3-300-2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving braided uncoated《.pdf》由会员分享，可在线阅读，更多相关《BS EN 60684-3-300-2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving braided uncoated《.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60684-3-300: 2002 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 300: Glass textile fibre sleeving, braided, uncoated The European Standard EN 60684-3-300:2002 has the status of a British Standard ICS 29.035.20 BS EN 60684-3-300:2002

2、 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 19 December 2002 BSI 19 December 2002 ISBN 0 580 40988 0 National foreword This British S

3、tandard is the official English language version of EN 60684-3-300:2002. It is identical with IEC 60684-3-300:2002. It supersedes BS 2848:1973 and BS 6893-3.300:1995 both of which are withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material,

4、 to Subcommittee GEL/15/3/5, Sleevings, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document ma

5、y be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users

6、are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, a

7、nd keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document

8、 indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60684-3-300 NORME EUROPENNE EUROPISCHE NORM September 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Euro

9、pisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60684-3-300:2002 E ICS 29.035.20 Supersedes HD 523.3.300 S1:1989 English

10、version Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002) Gaines isolantes souples Partie 3: Spcifications pour types particuliers de gaines Feuille 300: Gaines en fibres de verre tis

11、ses, guipes, nues (CEI 60684-3-300:2002) Isolierschluche Teil 3: Anforderungen fr einzelne Schlauchtypen Blatt 300: Glasfilament-Textilschluche, geflochten, unbeschichtet (IEC 60684-3-300:2002) This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to comply with the

12、 CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or

13、 to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the offici

14、al versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.Forewo

15、rd The text of document 15C/1355/FDIS, future edition 2 of IEC 60684-3-300, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-300 on 2002-09-01. This European Standard supersedes HD 523.3.3

16、00 S1:1989. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-09-0

17、1 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60684-3-300:2002 was approved by CENELEC as a European Standard without any modification

18、. _ Page2 EN606843300:2002INTRODUCTION This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); Part 2: Methods of test (IEC 60684-2); Part 3:

19、Specifications for individual types of sleeving (IEC 60684-3). This standard is one of the sheets comprising Part 3: Sheet 300: Glass textile fibre sleeving, braided, uncoated. Page3 EN606843300:2002FLEXIBLE INSULATING SLEEVING Part 3: Specifications for individual types of sleeving Sheet 300: Glass

20、 textile fibre sleeving, braided, uncoated 1 Scope This International Standard gives the requirements for glass textile fibre sleeving, uncoated, constructed from a braid of E-type yarn. The sleeving is annealed by heat treatment to assist in maintaining a circular cross-section. This sleeving is su

21、itable for use at temperatures up to 350 C. It is normally available in internal diameters between 0,5 mm and 30 mm and is normally supplied in its natural colour. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered

22、 to comply with this standard if they comply with the other property requirements listed in tables 2 and 3. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual re

23、quirements necessary for adequate performance in that application and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

24、 the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-10:1988, Basic environmental testing procedures Part 2: Tests Test J and guidance: Mould growth IEC 60684-1:1980, Specification for flexible insulating sleeving Part 1: Definitions and general requirements

25、 IEC 60684-2:1997, Flexible insulating sleeving Part 2: Methods of test IEC 60757:1983, Code for designation of colours 3 Designation The sleeving shall be identified by the following designation: Page4 EN606843300:2002Description IEC publication - Number - Part - Sheet Size (nominal internal diamet

26、er in millimetres) Colour Code to identify that requirements from table 3 are applicable Sleeving IEC 60684 3 300 8 NC X The addition of “X“ at the end of the designation indicates that either or both of the properties contained in table 3 have been agreed upon and are included in the purchase contr

27、act. Any abbreviation used for colour shall comply with IEC 60757. NC is used for “Natural Colour/ No Colour pigmentation”. Where no abbreviation is given, the colour shall be written in full. 4 Requirements In addition to the general requirements given in IEC 60684-1, sleeving shall meet the requir

28、e- ments of tables 1, 2 and 3 where applicable. 5 Sleeving conformance Sleeving conformance shall normally be based on results from 4 mm sleeving. Page5 EN606843300:2002Table 1 Dimensional requirements Nominal internal diameter mm Minimum wall thickness mm Remarks 0,5 and 0,8 1 to 4 5 to 8 10 to 15

29、15 0,15 0,25 0,30 0,35 0,45 Due to the extremely flexible nature of this sleeving, it is not possible to give tolerances on the internal diameter. Sleeving with a non-standard nominal internal diameter shall have a wall thickness at least as large as the next smallest standard size. Sleeving with a

30、nominal internal standard diameter less than 0,5 mm shall have a wall thickness at least 0,15 mm. Table 2 Property requirements Property IEC 60684-2 clause or subclause Units Max. or min. Requirements Wall thickness 3.2 mm Min. Table 1 Loss in mass on heating 8 % Max. 0,15 Tensile strength 19.3 MPa

31、Min. 90 Fraying resistance 20 % Max. By agreement between customer and supplier Ionic impurities 29 mS/m Max. 15 Table 3 Special requirements Property IEC 60684-2 clause or subclause or other reference Requirements Resistance to mould growth IEC 60068-2-10 Scale 1 or better Breakdown voltage at room

32、 temperature 21.2 or 21.4 See note NOTE Sleeving of this type is normally used only to provide air space insulation; no requirements for breakdown voltage are therefore specified in this standard. Any value for this property should be the subject of an agreement. A typical value is 1,5 kV/mm of wall

33、 thickness but a linear relationship between wall thickness and breakdown voltage cannot be assumed. Page6 EN606843300:2002Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated re

34、ference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorp

35、orated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/

36、HD Year IEC 60068-2-10 1988 Environmental testing Part 2: Tests - Test J and guidance: Mould growth HD 323.2.10 S3 1988 IEC 60684-1 1980 Specification for flexible insulating sleeving Part 1: Definitions and general requirements EN 60684-1 1995 IEC 60684-2 1997 Flexible insulating sleeving Part 2: M

37、ethods of test EN 60684-2 1997 IEC 60757 1983 Code for designation of colours HD 457 S1 1985 Page7 EN606843300:2002BS EN 60684-3-300: 2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It p

38、resents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of

39、 BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)2

40、0 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cus

41、tomer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Britis

42、h Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give deta

43、ils on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of t

44、hese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the

45、 BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored i

46、n a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.