BS EN 60335-2-83-2002+A1-2008 Household and similar electrical appliances - nSafety nPart 2-83 Particular requirements for heated gullies nfor roof drainage《家用和类似用途电器 安全性 屋顶排水用加热排水.pdf

《BS EN 60335-2-83-2002+A1-2008 Household and similar electrical appliances - nSafety nPart 2-83 Particular requirements for heated gullies nfor roof drainage《家用和类似用途电器 安全性 屋顶排水用加热排水.pdf》由会员分享，可在线阅读，更多相关《BS EN 60335-2-83-2002+A1-2008 Household and similar electrical appliances - nSafety nPart 2-83 Particular requirements for heated gullies nfor roof drainage《家用和类似用途电器 安全性 屋顶排水用加热排水.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-83:2002 +A1:2008 Household and similar electrical appliances Safety Part 2-83: Particular requirements for heated gullies for roof drainage ICS 91.060.20 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIBS EN 60335-2-83

2、:2002+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 25 November 2002 BSI 2008 ISBN 978 0 580 64088 9 National foreword This British Standard is the UK implementation of EN 60335-2-83:2002+A1:2008. It is identical with IEC 60335-2-83

3、:2001, incorporating amendment 1:2008. It supersedes BS EN 60335-2-83:2002, which will be withdrawn on 1 May 2013. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example,

4、 text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/07, Safety of electric appliances, heated appliance group. A list of organizations r

5、epresented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. A

6、mendments/corrigenda issued since publication Date Comments 30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSINORME EUROPENNE EUROPISCHE NORM July 2008 CENELEC Eu

7、ropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide

8、for CENELEC members. Ref. No. EN 60335-2-83:2002 E ICS 91.060.20 English version Household and similar electrical appliances - Safety Part 2-83: Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001) Appareils lectrodomestiques et analogues - Scurit Partie 2-83: Rgles par

9、ticulires pour les dispositifs lectriques de chauffage des gouttires (CEI 60335-2-83:2001) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-83: Besondere Anforderungen fr beheizbare Dachablufe (IEC 60335-2-83:2001) This European Standard was approved by CENELEC on 2002-02-

10、01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai

11、ned on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Centr

12、al Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spai

13、n, Sweden, Switzerland and United Kingdom. EN 60335-2-83:2002+A1 EUROPEAN STANDARD Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIForeword The text of document 61/2056/FDIS, future first edition of IEC 60335-2-83, prepared by the IEC Technical Comm

14、ittee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-83 on 2002-02-01. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003

15、-07-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2005-02-01 This part 2 has to be used in conjunction with EN 60335-1, Safety of household and similar electrical appliances, Part 1: General requirements. It was established on the basis of the 2002 edition

16、of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it i

17、nto the European Standard: Safety requirements for electric heated gullies for roof drainage. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant tex

18、t of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, incl

19、uding those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc. Subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications

20、: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than tho

21、se listed in annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in annex ZB to EN 60335-1. _ Page 2 BS EN 60335-2-83:2002+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIThe text of

22、document 61/3536/FDIS, future amendment 1 to IEC 60335-2-83:2001, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-83:2002 on 2008-05-01. The followi

23、ng dates are applicable: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 This amendment

24、 supplements or modifies the corresponding clauses of EN 60335-2-83:2002. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the International Standard IEC 60335-

25、2-83:2001 was approved by CENELEC as an amendment to the European Standard without any modification. _ Page 3 BS EN 60335-2-83:2002+A1:2008 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Dir

26、ective, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of t

27、he Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-83:2001 was approved by CENELEC as a European Standard without any modification. _ In the Bibliography, add

28、 the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). Foreword to amendment A1 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIACZ xenn n(oamritve) tamroNivefer et secneroi ntetanrilanolbup

29、 itacisno witht hieidnopserroc rlbup naeporuE gnitacisno noitiddA: cilbuPnoita Yrae iTtle DH/NE Yrae -86006 CEI-225 - )1 rivnEmnoset latnet- gni Patr2 :T etsT - setsK b:S altm its,yc lcic (smuidoc hrolis edo)noitul -86006 NE-225 6991 )2 _)1 tadnu fer deecnere )2 lav idide tita notad fo ei ssue Page

30、4 BS EN 60335-2-83:2002+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSICONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Definitions 7 4 General requirement.7 5 General conditions for the tests 8 6 Classification8 7 Marking and

31、instructions.8 8 Protection against access to live parts8 9 Starting of motor-operated appliances 8 10 Power input and current8 11 Heating.8 12 Void .9 13 Leakage current and electric strength at operating temperature9 14 Transient overvoltages .9 15 Moisture resistance 9 16 Leakage current and elec

32、tric strength.9 17 Overload protection of transformers and associated circuits .9 18 Endurance9 19 Abnormal operation 9 20 Stability and mechanical hazards9 21 Mechanical strength .10 22 Construction.10 23 Internal wiring.10 24 Components .10 25 Supply connection and external flexible cords 10 26 Te

33、rminals for external conductors.10 27 Provision for earthing .11 28 Screws and connections.11 29 Clearances, creepage distances and solid insulation11 30 Resistance to heat and fire.11 31 Resistance to rusting11 32 Radiation, toxicity and similar hazards11 Annexes .12 Bibliography 12 Page 5 BS EN 60

34、335-2-83:2002+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIINTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced person

35、s. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be exp

36、ected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to t

37、he supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text o

38、f this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction dif

39、fering from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. in Part 1, Part 1 applies. NOTE 1 not necessary to specify particular re

40、quirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a

41、hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as Page 6 BS EN 60335-2

42、-83:2002+A1:2008 by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as When a Part 2 standard does not include additional requirements to cover hazards dealt with This means that the technical committees responsible for the Part 2 standards have determined th

43、at it is ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or Part 2 standards. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSIHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-83: Particular requirements for heated gul

44、lies for roof drainage 1 Scope This clause of part 1 is replaced by: This international standard deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures, their rated voltage being not more than 250 V. As far

45、as is practicable, this standard deals with the common hazards presented by appliances which are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 101 Attention is drawn to the fact that in many countries additional requirements are specified

46、by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmos

47、phere (dust, vapour or gas). 2 Normative references This clause of part 1 is applicable except as follows. Addition: IEC 60068-2-52:1996, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium chloride solution). 3 Definitions This clause of part 1 is applicable except as follows. 3.

48、1.9 Replacement: normal operation operation of the appliance with a layer of thermal insulation having a thermal resistance of 1,25 m 2 K/W 0,3 m 2 K/W covering the top surface 4 General requirement This clause of part 1 is applicable. persons (including children) whose physical, sensory or mental c

49、apabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. ! “ ! “ Page 7 BS EN 60335-2-83:2002+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/03/2009 06:15, Uncontrolled Copy, (c) BSI21 Mechanical strength This clause of part 1 is applicable except as follows. Addition: The test is a