BS EN 60335-2-4-2010 Household and similar electrical appliances - Safety - Particular requirements for spin extractors《家用和类似用途电器 安全性 离心式脱水机的详细要求》.pdf

《BS EN 60335-2-4-2010 Household and similar electrical appliances - Safety - Particular requirements for spin extractors《家用和类似用途电器 安全性 离心式脱水机的详细要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60335-2-4-2010 Household and similar electrical appliances - Safety - Particular requirements for spin extractors《家用和类似用途电器 安全性 离心式脱水机的详细要求》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electricalappliances SafetyPart 2-4: Particular requirements for spin extractorsBS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 2

2、1/07/2010 04:11, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60335-2-4:2010. It wasderived by CENELEC from IEC 60335-2-4:2008. It supersedes BS EN 60335-2-4:2002, which will be withdrawn on 1 November 2014.The CENELEC common modifications have been

3、 implemented at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted by Technical CommitteeCPL/61, Safety of household and similar electrical appliances, toSubcommittee CPL/61/14, Home laundry and dishwashers.A list of organizatio

4、ns represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 63808 4 ICS 97.060Compliance with a British Standard cannot c

5、onfer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2010.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHIN

6、A STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60335-2-4 NORME EUROPENNE EUROPISCHE NORM January 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Centra

7、l Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-4:2010 E ICS 97.060; 13.120 Supersedes EN 60335-2-4:2002 + corr. Jun.2006 + A1:2004 + A2:2006English version Household

8、 and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors (IEC 60335-2-4:2008, modified) Appareils lectrodomestiques et analogues - Scurit - Partie 2-4: Rgles particulires pour les essoreuses centrifuges (CEI 60335-2-4:2008, modifie) Sicherheit elektrischer

9、Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-4: Besondere Anforderungen fr Wscheschleudern (IEC 60335-2-4:2008, modifiziert) This European Standard was approved by CENELEC on 2009-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit

10、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thr

11、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnic

12、al committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

13、land and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSIEN 60335-2-4:2010 - 2 - Foreword The text of document 61/3677/FDIS, future edition 6 of IEC 60335-2-4, prepared by IEC Technical Committee 61, Safety of household and simil

14、ar electrical appliances, was submitted to the IEC-CENELEC parallel vote. A draft amendment was prepared by the Technical Committee CENELEC TC 61, Safety of household and similar electrical appliances. It was discussed during the meetings of CENELEC TC 61 in Malaga in June 2007, in Berlin in Novembe

15、r 2007, in Kista in June 2008 and in London in December 2008, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The combined texts were approved by CENELEC as EN 60335-2-4 on 2009-11-01. This European Standard supersedes EN 60335-2-4:2002 + corr. June 2006 +

16、A1:2004 + A2:2006. The principal changes compared to EN 60335-2-4:2002 and its amendments are as follows (minor changes are not listed): aligns the text with EN 60335-1:2002 and its amendments, clarifies criteria for the protection against mechanical hazards for double lid appliances, some notes hav

17、e been converted to normative text. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates are applicable: - latest date by

18、which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2014-11-01 This part 2 has to be used in conjunction with EN 60335-1, Househo

19、ld and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amend

20、ment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric spin extractors. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as

21、far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

22、unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the l

23、etter Z. NOTE 2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. BS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSI- 3 - EN 60335-2-4:2010 Words in bo

24、ld in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national

25、deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version. _ BS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncon

26、trolled Copy, (c) BSIEN 60335-2-4:2010 - 4 - Endorsement notice The text of the International Standard IEC 60335-2-4:2008 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Unco

27、ntrolled Copy, (c) BSI- 5 - EN 60335-2-4:2010 Annex ZC (normative) Normative references to international publications with their corresponding European publications Addition: Publication Year Title EN/HD Year IEC 60730-2-12 (mod) 2005 Automatic electrical controls for household and similar use Part

28、2-12: Particular requirements for electrically operated door locks EN 60730-2-12 + A11 2006 2008 _ BS EN 60335-2-4:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSICONTENTS INTRODUCTION.7 1 Scope.9 2 Normative references . 10 3 Definitions 10 4 G

29、eneral requirement. 10 5 General conditions for the tests 10 6 Classification 10 7 Marking and instructions. 11 8 Protection against access to live parts 11 9 Starting of motor-operated appliances 11 10 Power input and current . 11 11 Heating 11 12 Void12 13 Leakage current and electric strength at

30、operating temperature12 14 Transient overvoltages .12 15 Moisture resistance 12 16 Leakage current and electric strength.13 17 Overload protection of transformers and associated circuits .13 18 Endurance13 19 Abnormal operation 13 20 Stability and mechanical hazards .14 21 Mechanical strength .15 22

31、 Construction.15 23 Internal wiring.15 24 Components .16 25 Supply connection and external flexible cords 16 26 Terminals for external conductors.16 27 Provision for earthing .16 28 Screws and connections.16 29 Clearances, creepage distances and solid insulation 16 30 Resistance to heat and fire.16

32、31 Resistance to rusting16 32 Radiation, toxicity and similar hazards16 Annexes .17 Annex C (normative) Ageing test on motors .17 Annex AA (normative) Rinsing agent17 Bibliography18 BS EN 60335-2-4:2010EN 60335-2-4:2010 6 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncon

33、trolled Copy, (c) BSIINTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as

34、 electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the s

35、afe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this

36、 standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additio

37、nal requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requiremen

38、ts. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when d

39、eveloping the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An app

40、liance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features which impair the level of safety covered by these requirements. An appliance employing material

41、s or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-4:2010EN 60335-2-4:20

42、10 7 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSIThis page deliberately set blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSIHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-4: Part

43、icular requirements for spin extractors 1 Scope This clause of Part 1 is replaced by the following. This European Standard deals with the safety of - stand alone electric spin extractors - spin extractors incorporated in washing machines that have separate containers for washing and spin extraction

44、for household and similar purposes that have a capacity not exceeding 10 kg of dry cloth and a drum peripheral speed not exceeding 50 m/s, their rated voltages being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but w

45、hich nevertheless may be a source of danger to the public, such as spin extractors intended to be used by laymen in shops, on farms, and for communal use in blocks of flats are within the scope of this standard. This standard deals with the common hazards presented by spin extractors that are encoun

46、tered by all persons in and around the home. However, it does not take into account - persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction, children playing wi

47、th the appliance. This standard does not apply to spin extractors intended to be used in launderettes, spin extractors intended exclusively for industrial purposes, spin extractors intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atm

48、osphere (dust, vapour or gas). NOTE 101 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary, in many countries additional requirements are specified by the national health authorities, the national

49、 authorities responsible for the protection of labour, the national water supply authorities and similar authorities. BS EN 60335-2-4:2010EN 60335-2-4:2010 9 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/07/2010 04:11, Uncontrolled Copy, (c) BSI2 Normative references This clause of Part 1 is applicable except as follows. Addition: IEC 60730-2-12:2005, Automatic electrical controls for household and similar use Part 2: Particular requirements for electrically operated