BS EN 60335-2-26-2003+A1-2008 Household and similar electrical appliances - nSafety nPart 2-26 Particular requirements for clocks《家用和类似用途电器的安全规范 钟表的特殊要求》.pdf

《BS EN 60335-2-26-2003+A1-2008 Household and similar electrical appliances - nSafety nPart 2-26 Particular requirements for clocks《家用和类似用途电器的安全规范 钟表的特殊要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60335-2-26-2003+A1-2008 Household and similar electrical appliances - nSafety nPart 2-26 Particular requirements for clocks《家用和类似用途电器的安全规范 钟表的特殊要求》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-26:2003 +A1:2008 Household and similar electrical appliances Safety Part 2-26: Particular requirements for clocks ICS 39.040.20 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIBS EN 60335-2-26:2003+A1:2008 This British

2、 Standard was published under the authority of the Standards Policy and Strategy Committee on 27 August 2003 BSI 2008 ISBN 978 0 580 64084 1 National foreword This British Standard is the UK implementation of EN 60335-2-26:2003+A1:2008. It is identical with IEC 60335-2-26:2002, incorporating amendme

3、nt 1:2008. It supersedes BS EN 60335-2-26:2003, which will be withdrawn on 1 May 2013. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendme

4、nt 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorized appliance group. A list of organizations represented on this subcommittee can be obtained on reque

5、st to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comme

6、nts 30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement 1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60335-2-26 +A1 NORME EUROPENNE EUROPISCHE NORM June 2008 CENELEC European Committee for

7、Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

8、Ref. No. EN 60335-2-26:2003 E ICS 13.120; 97.040.50 Supersedes EN 60335-2-26:1996English version Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks (IEC 60335-2-26:2002) Appareils lectrodomestiques et analogues - Scurit Partie 2-26: Rgles particulires

9、pour les horloges (CEI 60335-2-26:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-26: Besondere Anforderungen fr Uhren (IEC 60335-2-26:2002) This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to comply with the CEN/CENELEC Intern

10、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC mem

11、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELE

12、C members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. :2003 Licensed Copy: Wan

13、g Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIForeword The text of the International Standard IEC 60335-2-26:2002 (61/2203/FDIS), prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the Unique Acceptan

14、ce Procedure and was approved by CENELEC as EN 60335-2-26 on 2003-05-01. This European Standard replaces EN 60335-2-26:1996. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (d

15、op) 2004-05-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-05-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edit

16、ion of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert

17、it into the European Standard: Safety requirements for electric clocks. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be a

18、dapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a repla

19、ced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; -

20、 notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex

21、ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page 2 BS EN 60335-2-26:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIForeword to amendment A1The tex

22、t of document 61/3543/FDIS, future amendment 1 to IEC 60335-2-26:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-26:2003 on 2008-05-01. The fo

23、llowing dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 This

24、amendment supplements or modifies the corresponding clauses of EN 60335-2-26:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the International Standard I

25、EC 60335-2-26:2002 was approved by CENELEC as an amendment to the European Standard without any modification. Page 3 BS EN 60335-2-26:2003+A1:2008In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ Introduction A

26、n investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the

27、 risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of

28、the International Standard IEC 60335-2-26:2002 was approved by CENELEC as a European Standard without any modification. _ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIPage 4 BS EN 60335-2-26:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHIN

29、A STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSICONTENTS INTRODUCTION 6 1 Scope 7 2 Normative references. 7 3 Definitions . 7 4 General requirement 8 5 General conditions for the tests . 8 6 Classification . 8 7 Marking and instructions 8 8 Protection against access to live parts. 8 9 Start

30、ing of motor-operated appliances . 8 10 Power input and current. 8 11 Heating 8 12 Void . 8 13 Leakage current and electric strength at operating temperature. 8 14 Transient overvoltages. 9 15 Moisture resistance 9 16 Leakage current and electric strength 9 17 Overload protection of transformers and

31、 associated circuits. 9 18 Endurance . 9 19 Abnormal operation 9 20 Stability and mechanical hazards. 9 21 Mechanical strength. 9 22 Construction .10 23 Internal wiring.10 24 Components .10 25 Supply connection and external flexible cords.10 26 Terminals for external conductors.10 27 Provision for e

32、arthing10 28 Screws and connections .10 29 Clearances, creepage distances and solid insulation 11 30 Resistance to heat and fire .11 31 Resistance to rusting 11 32 Radiation, toxicity and similar hazards11 Annexes12 Bibliography12 Page 5 BS EN 60335-2-26:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXC

33、HANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSI60335-2-26 IEC:2002(E) 5 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes t

34、he internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes i

35、nto account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, nat

36、ional wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other

37、 is taken into account. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An

38、 appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. When a

39、 Part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in quest

40、ion over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they

41、have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addit

42、ion to Part 1 or art 2 standards. Page 6 BS EN 60335-2-26:2003+A1:2008 P Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSIHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-26: Particular requirements for clocks 1 Scope This clause of Part 1 i

43、s replaced by the following. This International Standard deals with the safety of electric clocks having a rated voltage not more than 250 V. NOTE 101 Examples of appliances that are within the scope of this standard are a l a r m c l o c k s ; spring-driven clocks with an electrically operated wind

44、ing mechanism; clocks incorporating driving means other than motors. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 102 Attention is draw

45、n to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and

46、 similar authorities. NOTE 103 This standard does not apply to battery-operated clocks; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or

47、gas); clocks having other functions, whether or not in combination with time indication, such as master control clocks and timers for cooking ranges, washing machines and similar appliances; clocks for “clocking-in“ purposes; clocks incorporating electronic circuits only (IEC 60065). 2 Normative ref

48、erences This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable except as follows. persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or inst

49、ruction; children playing with the appliance. ! “ Page 7 BS EN 60335-2-26:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/03/2009 08:09, Uncontrolled Copy, (c) BSI60335-2-26 IEC:2002(E) 7 3.1.9 Replacement: normal operation operation of the clock under the following conditions Spring-driven clocks having an electrically operated winding mechanism are operated as in normal