BS EN 60086-2-2016 Primary batteries Physical and electrical specifications《原电池 物理和电气规范》.pdf

《BS EN 60086-2-2016 Primary batteries Physical and electrical specifications《原电池 物理和电气规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60086-2-2016 Primary batteries Physical and electrical specifications《原电池 物理和电气规范》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、Primary batteriesPart 2: Physical and electrical specifications(IEC 60086-2:2015)BS EN 60086-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordT h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f E N 6 0 0 8 6 - 2 :

2、 2 0 1 6 . I t i si d e n t i c a l t o I E C 6 0 0 8 6 - 2 : 2 0 1 5 . I t s u p e r s e d e s B S E N 6 0 0 8 6 - 2 : 2 0 1 1 w h i c h w i l lb e w i t h d r a w n o n 3 D e c e m b e r 2 0 1 8 .BSI, as a member of CENELEC, is obliged to publish BS EN 60086-2 as aBritish Standard. However, attent

3、ion is drawn to the fact that the UK committee voted against its approval as a European standard. The UKcommittee submitted a negative vote for the following reason:Although it had been accepted by IEC/TC 35 that the pulse load should beapplied first in all the discharge tests, this change has not b

4、een appliedconsistently. The circuit diagrams in 6.1.6, 6.4.2, 6.4.5, 6.5.1 and 6.6.8 stillindicate that the background load is applied first. Also, in the table in 6.6.8the background load for testing a smoke detector is listed before the pulseload.The UK participation in its preparation was entrus

5、ted to TechnicalCommittee CPL/35, Primary cells.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Stan

6、dards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85788 1ICS 29.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.A

7、mendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60086-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60086-2 February 2016 ICS 29.220.10 Supersedes EN 60086-2:2011 English Version Primary batteries - Part 2: Physical and electrical specifications (IEC

8、 60086-2:2015) Piles lectriques - Partie 2: Spcifications physiques et lectriques (IEC 60086-2:2015) Primrbatterien - Teil 2: Physikalische und elektrische Spezifikationen (IEC 60086-2:2015) This European Standard was approved by CENELEC on 2015-12-03. CENELEC members are bound to comply with the CE

9、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Ce

10、ntre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same sta

11、tus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

12、a, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische No

13、rmung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60086-2:2016 E BS EN 60086-2:2016EN 60086-2:2016 2 European foreword The text of document 35/1350/FDIS, futu

14、re edition 13 of IEC 60086-2, prepared by IEC/TC 35 “Primary cells and batteries“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60086-2:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an i

15、dentical national standard or by endorsement (dop) 2016-09-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-03 This document supersedes EN 60086-2:2011. Attention is drawn to the possibility that some of the elements of this document may

16、 be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60086-2:2015 was approved by CENELEC as a European Standard without any modification. In the official versio

17、n, for Bibliography, the following notes have to be added for the standard indicated : IEC 60086-3 NOTE Harmonized as EN 60086-3. IEC 60086-4 NOTE Harmonized as EN 60086-4. IEC 60086-5 NOTE Harmonized as EN 60086-5. IEC 62281 NOTE Harmonized as EN 62281. BS EN 60086-2:2016EN 60086-2:2016 3 Annex ZA

18、(normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For

19、 undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the Europ

20、ean Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60086-1 2015 Primary batteries - Part 1: General EN 60086-1 2015 ISO 1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and r

21、un-out EN ISO 1101 - BS EN 60086-2:2016BS EN 60086-2:2016 2 IEC 60086-2:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms and definitions 8 3.2 Symbols and abbreviations . 9 4 Battery dimensions, symb

22、ols . 10 5 Constitution of the battery specification tables . 10 6 Physical and electrical specifications . 12 6.1 Category 1 batteries . 12 6.1.1 General . 12 6.1.2 Category 1 Specifications: LR20, R20P, R20S 13 6.1.3 Category 1 Specifications: LR14, R14P, R14S 14 6.1.4 Category 1 Specifications: L

23、R6, FR14505, R6P, R6S . 15 6.1.5 Category 1 Specifications: LR03, FR10G445, R03 16 6.1.6 Category 1 Specifications: LR1, R1, LR8D425 17 6.2 Category 2 batteries Specifications: CR14250, CR15H270, CR17345, CR17450, BR17335 18 6.3 Category 3 batteries Specifications: LR9, CR11108 . 19 6.4 Category 4 b

24、atteries . 20 6.4.1 General . 20 6.4.2 Category 4 Specifications: PR70, PR41, PR48, PR44 . 20 6.4.3 Fit acceptance gauge for PR batteries . 22 6.4.4 Category 4 Specifications: LR41, LR55, LR54, LR43, LR44 23 6.4.5 Category 4 Specifications: SR62, SR63, SR65, SR64, SR60, SR67, SR66, SR58, SR68, SR59,

25、 SR69, SR41, SR57, SR55, SR48, SR54, SR42, SR43, SR44 25 6.4.6 Category 4 Specifications: CR1025, CR1216, CR1220, CR1616, CR2012, CR1620, CR2016, CR2025, CR2320, CR2032, CR2330, CR2430, CR2354, CR3032, CR2450, BR1225, BR2016, BR2320, BR2325, BR3032 . 27 6.5 Category 5 batteries . 29 6.5.1 Category 5

26、 Specifications: 4LR44, 2CR13252, 4SR44 29 6.5.2 Category 5 Specifications: 5AR40 . 30 6.6 Category 6 batteries . 31 6.6.1 Category 6 Specifications: 3R12P, 3R12S, 3LR12 31 6.6.2 Category 6 Specifications: 4LR61 . 32 6.6.3 Category 6 Specifications: CR-P2 . 33 6.6.4 Category 6 Specifications: 2CR5 3

27、4 6.6.5 Category 6 Specifications: 4R25X, 4LR25X 35 6.6.6 Category 6 Specifications: 4R25Y . 36 6.6.7 Category 6 Specifications: 4R25-2, 4LR25-2 . 37 6.6.8 Category 6 Specifications: 6F22, 6LR61, 6LP3146 . 38 6.6.9 Category 6 Configurations: Stud for 6F22, 6LR61 6LP3146 39 6.6.10 Category 6 Specific

28、ations: 6AS4 . 40 6.6.11 Category 6 Specifications: 6AS6 . 41 BS EN 60086-2:2016IEC 60086-2:2015 IEC 2015 3 (informative) Tabulation of batteries by application 42 Annex A(informative) Cross-reference index . 48 Annex B(informative) Index . 51 Annex C(informative) Common designation. 52 Annex DBibli

29、ography 53 Figure 1 Dimensional drawing: Category 1 12 Figure 2 Dimensional drawing: LR20, R20P, R20S 13 Figure 3 Dimensional drawing: LR14, R14P, R14S 14 Figure 4 Dimensional drawing: LR6, FR14505, R6P, R6S 15 Figure 5 Dimensional drawing: LR03, FR10G445, R03 . 16 Figure 6 Dimensional drawing: LR1,

30、 R1, LR8D425 . 17 Figure 7 Dimensional drawing: CR14250, CR15H270, CR17345, CR17450, BR17335 . 18 Figure 8 Dimensional drawing: LR9, CR11108 19 Figure 9 Dimensional drawing: Category 4 . 20 Figure 10 Dimensional drawing: PR70, PR41, PR48, PR44 . 20 Figure 11 Gauge opening for P system batteries 22 F

31、igure 12 Suggested gauge layout . 22 Figure 13 Air hole placement diagram for P system batteries . 23 Figure 14 Dimensional drawing: LR41, LR55, LR54, LR43, LR44 . 23 Figure 15 Dimensional drawing: SR62, SR63, SR65, SR64, SR60, SR67, SR66, SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48, SR54, SR42,

32、SR43, SR44 25 Figure 16 Dimensional drawing: CR1025, CR1216, CR1220, CR1616, CR2012, CR1620, CR2016, CR2025, CR2320, CR2032, CR2330, CR2430, CR2354, CR3032, CR2450, BR1225, BR2016, BR2320, BR2325, BR3032 27 Figure 17 Dimensional drawing: 4LR44, 2CR13252, 4SR44 . 29 Figure 18 Dimensional drawing: 5AR

33、40 30 Figure 19 Dimensional drawing: 3R12P, 3R12S, 3LR12 . 31 Figure 20 Dimensional drawing: 4LR61 32 Figure 21 Dimensional drawing: CR-P2 33 Figure 22 Dimensional drawing: 2CR5 . 34 Figure 23 Dimensional drawing: 4R25X, 4LR25X 35 Figure 24 Dimensional drawing: 4R25Y 36 Figure 25 Dimensional drawing

34、: 4R25-2, 4LR25-2 37 Figure 26 Dimensional drawing: 6F22, 6LR61, 6LP3146 38 Figure 27 Dimensional drawing: Stud . 39 Figure 28 Dimensional drawing: 6AS4 40 Figure 29 Dimensional drawing: 6AS6 41 Table 1 Gauge opening dimension (mm) 22 Table A.1 Automatic camera 42 Table A.2 CD, digital audio, wirele

35、ss gaming and accessories . 42 Table A.3 Digital audio . 42 Table A.4 Digital still camera . 42 BS EN 60086-2:2016 4 IEC 60086-2:2015 IEC 2015 Table A.5 Electric equipment . 42 Table A.6 Electric fence controller . 43 Table A.7 Electronic key 43 Table A.8 Hearing aid 43 Table A.9 Hearing aid high dr

36、ain 43 Table A.10 Hearing aid standard 43 Table A.11 High intensity lighting . 43 Table A.12 Laser pointer 44 Table A.13 Pager . 44 Table A.14 Photo . 44 Table A.15 Portable lighting (LED) . 44 Table A.16 Portable stereo 45 Table A.17 Radio . 45 Table A.18 Radio / Clock . 45 Table A.19 Radio / Clock

37、 / Remote control . 45 Table A.20 Remote control . 45 Table A.21 Road warning lamp 46 Table A.22 Smoke detector 46 Table A.23 Toy (motor) 46 Table A.24 Toy (non-motorized) . 46 Table A.25 Wireless streaming . 47 Table B.1 Category 1 batteries . 48 Table B.2 Category 2 batteries . 48 Table B.3 Catego

38、ry 3 batteries . 48 Table B.4 Category 4 batteries . 49 Table B.5 Category 5 batteries . 50 Table B.6 Category 6 batteries . 50 Table C.1 Index . 51 Table D.1 Index . 52 BS EN 60086-2:2016IEC 60086-2:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PRIMARY BATTERIES Part 2: Physical and e

39、lectrical specifications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerni

40、ng standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their p

41、reparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates close

42、ly with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevan

43、t subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the tec

44、hnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum ex

45、tent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provid

46、e conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or it

47、s directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses

48、arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention

49、 is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60086-2 has been prepared by IEC technical committee 35: Primary cells and batteries. This thirteenth edition cancels and replaces th