BS EN 50529-2-2010 EMC network standard Wire-line telecommunications networks using coaxial cables《电磁兼容性(EMC)网络标准 使用同轴电缆的电线-线路通信网络》.pdf

《BS EN 50529-2-2010 EMC network standard Wire-line telecommunications networks using coaxial cables《电磁兼容性(EMC)网络标准 使用同轴电缆的电线-线路通信网络》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50529-2-2010 EMC network standard Wire-line telecommunications networks using coaxial cables《电磁兼容性(EMC)网络标准 使用同轴电缆的电线-线路通信网络》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50529-2:2010EMC Network StandardPart 2: Wire-line telecommunications networks using coaxial cablesLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, U

2、ncontrolled Copy, (c) BSIBS EN 50529-2:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50529-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/210/11, EMC product standards.A list of organizations represented on this com

3、mittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 67459 4ICS 33.060.40Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIBS EN 50529-2:2

5、010EUROPEAN STANDARD EN 50529-2 NORME EUROPENNE EUROPISCHE NORM November 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 C

6、ENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50529-2:2010 E ICS 33.060.40 English version EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables Norme CEM pour les rseaux de tlcommunications -

7、Partie 2 : Rseaux de tlcommunications filaires utilisant des cbles coaxiaux EMV-Norm fr bertragungsnetze - Teil 2: Leitungsgebundene bertragungsnetze, die Koaxialkabel nutzen This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply with the CEN/CENELEC Intern

8、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC mem

9、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELE

10、C members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, S

11、lovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIBS EN 50529-2:2010EN 50529-2:2010 2 Foreword This European Standard was prepared by the Joint CENELEC ETSI Working Group “EMC of co

12、nducted transmission networks”. It was submitted to the formal vote and wes approved by CENELEC as EN 50529-2 on 2010-11-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identif

13、ying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-11-01 latest date by which the national standards conflicting with the EN have to be w

14、ithdrawn (dow) 2013-11-01 This European Standard has been prepared under Mandate M/313 given to CENELEC and ETSI by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2004/108/EC 1). See Annex ZZ. _ 1)Directive 2004/108/EC of the Europea

15、n Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, OJ L 390, 31.12.2004, p. 24-37. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolle

16、d Copy, (c) BSIBS EN 50529-2:2010 3 EN 50529-2:2010 Contents Introduction .41Scope .52Normative references 53Terms, definitions and abbreviations .63.1Terms and definitions 63.2Abbreviations 84EMC requirements for networks 84.1Introduction .84.2Apparatus for wire-line telecommunications networks usi

17、ng coaxial cables 8Annex A (informative) Example of good engineering practice.9A.1General provisions 9A.2 Provisions for coaxial cables and coaxial cable assemblies.9A.3 Provisions for cable networks for television signals, sound signals and interactive services using coaxial cables . 11Annex ZZ (in

18、formative) Coverage of Essential Requirements of EC Directives 12Bibliography . 13 Tables Table 1 Harmonised EMC standards for coaxial cable network equipment .8Table A.1 Standards for coaxial cables with EMC requirements . 10Table A.2 Standards for coaxial cable assemblies with EMC requirements 11

19、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIBS EN 50529-2:2010EN 50529-2:2010 4 Introduction This part of the multi-part EMC standard specifies limits and methods of measurement for emissions emanating from wire-line telecommunication networks a

20、nd immunity of those networks by means of references to harmonised product standards in combination with good engineering practice. This standard specifically refers to networks using coaxial cables. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIB

21、S EN 50529-2:2010 5 EN 50529-2:2010 1 Scope This EMC standard specifies requirements for emissions originating from within wire-line telecommunication networks using coaxial cables and the immunity of those networks, including their in-premises extensions by references to harmonised EMC product stan

22、dards and other standards with EMC requirements in combination with good engineering practice, when installed and operated as intended. This standard covers the frequency range 9 kHz to 400 GHz. The assessment of a network needs to be performed only in the frequency ranges where limits are defined.

23、The emission limits set in this standard do not apply to the wanted emissions from embedded radio links within the network. The requirements have been selected so as to ensure that electromagnetic disturbances generated by a network, or parts thereof, operating normally do not exceed a level above w

24、hich radio and telecommunications apparatus or other apparatus cannot operate as intended. Fault conditions of the network are not taken into account. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edit

25、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50083-2:2006 2)Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment EN 55022:2006 2)+ A1:2007 I

26、nformation technology equipment Radio disturbance characteristics Limits and methods of measurement (CISPR 22:2005, mod. + A1:2005) EN 55024:1998 2)+ A1:2001 + A2:2003 Information technology equipment Immunity characteristics Limits and methods of measurement (CISPR 24:1997, mod. + A1:2001 + A2:2002

27、) ETSI EN 300 386: V1.4.1 (2008-04)2)Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements IEC 60050-161:1990 + A1:1997 + A2:1998 International Electrotechnical Vocabulary Chapter 161: Electromagnetic com

28、patibility IEC 60050-723:1997 + A1:1999 International Electrotechnical Vocabulary Chapter 723: Broadcasting: Sound, television, data EN 55013:2001 2)Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13:200

29、1, mod.) EN 55020:2007 2)Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2006) 2)And all previous editions listed in the OJEC. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrol

30、led Copy, (c) BSIBS EN 50529-2:2010EN 50529-2:2010 6 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 active equipment equipment (e.g. amplifiers, converters, etc.), performing signal processing by me

31、ans of external or internal power supply in a certain frequency range 3.1.2 cable network equipment equipment from which cable networks for television signals, sound signals and interactive services are built NOTE Examples of typical cable network equipment could be found in Part 3 to Part 6 and Par

32、t 10 of the EN 60728 series. 3.1.3 degradation (of performance) undesired departure in the operational performance of any device, equipment or system from its intended performance NOTE The term “degradation“ can apply to temporary or permanent failure. IEV 161-01-19 3.1.4 electromagnetic disturbance

33、 any electromagnetic phenomenon which may degrade the performance of a device, equipment or system, or adversely affect living or inert matter NOTE An electromagnetic disturbance may be an electromagnetic noise, an unwanted signal or a change in the propagation medium itself. IEV 161-01-05 3.1.5 ele

34、ctronic communications network means transmission systems and, where applicable, switching or routing equipment and other resources which permit the conveyance of signals by wire, by radio, by optical or by other electromagnetic means, including satellite networks, fixed (circuit- and packet-switche

35、d, including Internet) and mobile terrestrial networks, electricity cable systems, to the extent that they are used for the purpose of transmitting signals, networks used for radio and television broadcasting, and cable televisionnetworks, irrespective of the type of information conveyed Derived fro

36、m Art.2.a) of Directive 2002/21/EC 1 (Framework Directive) 3.1.6 emission phenomenon by which electromagnetic energy emanates from a source IEV 161-01-08 3.1.7 equipment for the purposes of this standard equipment means any apparatus or fixed installation Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA

37、STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIBS EN 50529-2:2010 7 EN 50529-2:2010 3.1.8 headend equipment, which is connected between receiving antennas or other signal sources and the remainder of the cable network, to process the signals to be distributed IEV 723-09-11, modified NOTE The

38、 headend may, for example, comprise antenna amplifiers, frequency converters, combiners, separators and generators. 3.1.9 immunity (to a disturbance) ability of a device, equipment or system to perform without degradation in the presence of an electromagnetic disturbance IEV 161-01-20 3.1.10 network

39、 cable cable infrastructure (transmission line) used to connect together equipment 3.1.11 passive equipment equipment (e.g. splitters, tap-offs, system outlets, etc.) not requiring a power supply in order to operate and/or not carrying out signal processing in a certain frequency range 3.1.12 (elect

40、romagnetic) radiation 1. phenomenon by which energy in the form of electromagnetic waves emanates from a source into space 2. energy transferred through space in the form of electromagnetic waves NOTE By extension, the term “electromagnetic radiation“ sometimes also covers induction phenomena. IEV 1

41、61-01-10 3.1.13 screening effectiveness ability of an equipment or system to attenuate the influence of electromagnetic fields from outside the equipment or system or to suppress the radiation of electromagnetic fields from inside the equipment or system 3.1.14 (surface) transfer impedance (of a coa

42、xial line) quotient of the voltage induced in the centre conductor of a coaxial line per unit length by the current on the external surface of the coaxial line IEV 161-04-15 3.1.15 wire-line telecommunication network combination of equipment and passive devices (network cables, connectors) interconn

43、ected together to constitute the wire-line part of an electronic communications network Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 07:53, Uncontrolled Copy, (c) BSIBS EN 50529-2:2010EN 50529-2:2010 8 3.2 Abbreviations For the purposes of this document, the following abbreviati

44、ons apply. CENELEC European Committee for Electrotechnical Standardization CISPR International Special Committee on Radio Interference EMC Electromagnetic Compatibility ETSI European Telecommunications Standards Institute IEC International Electrotechnical Commission IEV International Electrotechnic

45、al Vocabulary 4 EMC requirements for networks 4.1 Introduction Assuming that apparatus meets the EMC requirements defined in the applicable EMC product standards a network or a network segment using coaxial cables is deemed to be compliant to the present standard (all conditions apply) provided that

46、: all apparatus when first connected directly to the network or network segment meets the requirements defined in the version of EMC product standards listed in Table 1 applicable when that apparatus was placed on the market, for both emission and immunity taking into account the properties of the n

47、etwork or network segment; the apparatus is installed according to the manufacturers instructions; the network or network segment has been built, configured and maintained according to good engineering practice to achieve electromagnetic compatibility and this practice is documented. Examples of goo

48、d engineering practice meeting the criteria above are given in Annex A. 4.2 Apparatus for wire-line telecommunications networks using coaxial cables All apparatus installed in the network shall comply with all EMC requirements for emission and immunity of the appropriate standards listed in Table 1.

49、 Table 1 Harmonised EMC standards for coaxial cable network equipment Standards No. Title EN 50083-2 Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements EN 55022 Information