BS EN 50512-2009 Electrical installations for lighting and beaconing of aerodromes - Advanced visual docking guidance systems (A-VDGS)《机场照明和航路信标指示用电气设备 高级可视化泊位引导系统(A-VDGS)》.pdf

《BS EN 50512-2009 Electrical installations for lighting and beaconing of aerodromes - Advanced visual docking guidance systems (A-VDGS)《机场照明和航路信标指示用电气设备 高级可视化泊位引导系统(A-VDGS)》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50512-2009 Electrical installations for lighting and beaconing of aerodromes - Advanced visual docking guidance systems (A-VDGS)《机场照明和航路信标指示用电气设备 高级可视化泊位引导系统(A-VDGS)》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectrical installations for lightingand beaconing of aerodromes Advanced Visual DockingGuidance Systems (A-VDGS)BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND

2、ARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 50512:2009.The UK participation in its preparation was entrusted to Technical CommitteeEPL/97, Aeronautical ground lighting.A list of organizations represented on this committee ca

3、n be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62795 8ICS 93.120Compliance with a British Standard cannot confer immunity fromlegal obligations.

4、This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 Janaury 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled

5、Copy, (c) BSIEUROPEAN STANDARD EN 50512 NORME EUROPENNE EUROPISCHE NORM February 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Bruss

6、els 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50512:2009 E ICS 93.120 English version Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) Installations l

7、ectriques pour lclairage et le balisage des arodromes - Systmes Avancs de Guidage Visuel pour lAccostage (SAGVA) Elektrische Anlagen fr Beleuchtung und Befeuerung von Flugpltzen - Erweitertes optisches Andockfhrungssystem (A-VDGS) This European Standard was approved by CENELEC on 2008-12-01. CENELEC

8、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl

9、ication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretar

10、iat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Ne

11、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSIEN 50512:2009 2 Foreword This European Standard was prepared by Work

12、ing Group 3 of the Technical Committee CENELEC TC 97, Electrical installations for lighting and beaconing of aerodromes. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50512 on 2008-12-01. The following dates were fixed: latest date by which

13、the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-12-01 This European Standard has been prepared under a mandate given

14、to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2004/108/EC. See Annex ZZ. _ BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSI 3 EN 50512:2009 Contents In

15、troduction . 4 1 Scope . 4 2 Normative references 4 3 Definitions . 5 4 Requirements 8 4.1 System performance . 8 4.2 Design 10 4.3 Safety . 13 4.4 Installation and maintenance . 14 4.5 Verification of equipment quality 14 5 Test 15 5.1 Type tests . 15 5.2 Factory test. 26 5.3 Site test 26 Annex A (

16、informative) Best practices for an A-VDGS and proved methods Functions to support the operation particular on busy airports 27 Annex ZZ (informative) Coverage of Essential Requirements of EC Directives 30 Figures Figure 1 Area covered by the A-VDGS 8 Figure 2 Principle test configuration 19 Figure 3

17、 Measurement configuration . 20 Figure 4 Measurement area 21 Tables Table 1 A-VDGS accuracy 9 Table 2 Maximum aircraft taxi speed during the docking procedure . 9 Table 3 Minimum luminance ratios (LR) for various colours, at test angles on the reference axis and off the reference axis 11 Table 4 Tem

18、perature tests 16 Table 5 Vibration test 23 Table A.1 Information provided by the A-VDGS display 28 BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSIEN 50512:2009 4 Introduction This European Standard contains the requirements for an

19、Advanced Visual Docking Guidance System (A-VDGS) as it is described in the ICAO Annex 14. This standard covers the characteristics of the electrical and mechanical components. This standard includes the software design where this affects the required system performance and safety. An A-VDGS is to be

20、 designed to achieve safe and precise guidance during the docking procedure of an aircraft. The system provides at least a display which shows information of azimuth guidance and stop information. The use of an A-VDGS is in principle limited to a defined area with an opening angle and a border dista

21、nce to the stop point related to the centre line. The reference point for all distances and guidance information at the aircraft is the central axis of the nose wheel. It has to be considered that in some cases the topographical situation of an airport requires a reduced working area for an A-VDGS w

22、hich will result in the area being different from the requirements stated herein. For practical use on the airport it has to be considered that the detection range can be limited due to the actual weather and visibility condition prevailing (fog, rain, snow, etc.). 1 Scope This European Standard spe

23、cifies requirements of electrical and mechanical design, installation, maintenance and testing procedures for advanced visual docking guidance systems. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi

24、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60068-2-1, Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1) EN 60068-2-2, Environmental testing - Part 2-2: Tests - Test B: Dry heat (IEC 60068-2-2)

25、EN 60068-2-5, Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level (IEC 60068-2-5) EN 60068-2-30, Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30) EN 60068-2-64, Environmental testing - Part 2-64: Tests

26、 - Test Fh: Vibration, broadband random and guidance (IEC 60068-2-64) EN 60439-1:1999, Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 6082

27、5-1, Safety of laser products - Part 1: Equipment classification and requirements (IEC 60825-1) BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSI 5 EN 50512:2009 EN 61000-3-2, Electromagnetic compatibility (EMC) - Part 3-2: Limits - L

28、imits for harmonic current emissions (equipment input current 16 A per phase) (IEC 61000-3-2) EN 61000-3-3, Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current

29、16 A per phase and not subject to conditional connection (IEC 61000-3-3) EN 61000-3-11, Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current 75 A and subject to co

30、nditional connection (IEC 61000-3-11) EN 61000-3-12, Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase (IEC 61000-3-12) EN 61000-6-2, Electromagnetic compatib

31、ility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments (IEC 61000-6-2) EN 61000-6-3, Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3) HD 472, Nominal voltages

32、for low-voltage public electricity supply systems (IEC 60038 IEC standard voltages, mod.) HD 60364 series, Low voltage electrical installations (IEC 60364 series, mod.) 3 Definitions For the purposes of this document, the following terms and definitions apply. The following definitions were develope

33、d to be included in international standards relating to A-VDGS on aerodromes. 3.1 Advanced Visual Docking Guidance System (A-VDGS) those systems that provide additional guidance information to pilots, e.g. aircraft type indication, distance-to-go information and closing speed. Docking guidance infor

34、mation is provided on an A-VDGS display. Advanced-VDGS also permit interfacing to external management, guidance or allocation systems 3.2 A-VDGS display display which presents the guidance and other information to the pilots in the left and/or right hand seats and to the drivers and to any other per

35、sons assisting the aircraft docking procedure 3.3 aircraft type the aircraft manufacturers designation for an aircraft grouping with similar design or style of structure 3.4 ambient brightness the overall brightness level in the viewing environment surroundings BS EN 50512:2009Licensed Copy: Wang Bi

36、n, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSIEN 50512:2009 6 3.5 azimuth guidance information which will enable the pilot of an aircraft to follow the required track 3.6 control of the A-VDGS any manual or automatic means to operate the A-VDGS. This includes the requi

37、red settings for an individual guidance procedure 3.6.1 local control the control of the A-VDGS from a position where the A-VDGS display and the docking area can be observed by the A-VDGS operator 3.6.2 remote control the control of the A-VDGS from any remote position where the operator may not be a

38、ble to observe the docking procedure 3.7 detection range the distance within which the A-VDGS is able to detect an aircraft 3.8 earthed connected to the general mass of earth in such a manner as to ensure at all times an immediate discharge of electrical energy to reduce the danger of equipment dama

39、ge or personnel injury 3.9 electrical equipment anything used, intended to be used or installed for use, to generate, provide, transmit, transform, rectify, convert, conduct, distributes, control, store, measure or use electrical energy 3.10 emergency stop the event caused by manual or automatic mea

40、ns that initiates the emergency stop indication 3.11 emergency stop indication a stop indication to pilots, drivers and any other persons assisting the docking procedure to immediately interrupt the docking procedure 3.12 guidance presentation of any information assisting the pilot and/or driver to

41、reach safely and with the required accuracy the designated stop area 3.13 Luminance Ratio (LR) the ratio of luminance emitted from the display in the ON state compared to the luminance in the OFF state BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrol

42、led Copy, (c) BSI 7 EN 50512:2009 Luminance ratio (LR) shall be calculated as follows: LR = (La - Lb) / Lbwhere Lais defined as the measured luminance of the display in the ON-state when under external illumination; Lbis defined as the measured luminance of the display in the OFF-state when under ex

43、ternal illumination 3.14 Meteorological Optical Range (MOR) the length of the path in the atmosphere required to reduce the luminous flux in a collimated beam from an incandescent lamp, at a colour temperature of 2 700 K, to 0,05 of its original value, the luminous flux being evaluated by means of p

44、hotometric luminosity function of the International Commission on Illumination (CIE) (metre (m) or kilometre (km) 3.15 nose wheel the single or multiple wheels of the undercarriage at the front of the aircraft used to steer the aircraft on the ground. The reference point for the docking is the centr

45、e of the nose wheel footprint 3.16 on-block end of a docking procedure where the aircraft is parked in the dedicated stop area 3.17 off-block end of the aircraft parking period usually initiated by the push-back procedure 3.18 working area of an A-VDGS the area the A-VDGS is intended to perform the

46、aircraft docking. The working area can be temporarily limited by environmental or operational influences 3.19 functional safety part of the overall safety which depends on the correct functioning of the A-VDGS 3.20 power loss the abnormal power supply condition or a total loss of the external energy

47、 supply that does not allow operating the A-VDGS or parts of the system 3.21 stop point the predefined location where the particular aircraft shall be parked related to the predefined aircraft reference point 3.22 stop area the area defined by the maximum lateral and longitudinal tolerance around th

48、e stop point BS EN 50512:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/04/2010 03:21, Uncontrolled Copy, (c) BSIEN 50512:2009 8 3.23 towed aircraft an aircraft that is moved by an external device like a towing truck or any other towing or pushing equipment operated outside the aircra

49、ft 4 Requirements 4.1 System performance 4.1.1 General conditions The manufacturer shall state the electrical, mechanical, environmental conditions and functional performances for which the A-VDGS is designed. The A-VDGS shall cover an area having a horizontal opening angle of at least 10 to either side of the centre line with a border distance to the stop point of 1 m to either side of the centre line according to Figure 1. The origin of the defined distances is the stop point of th