BS EN 50411-3-3-2011 Fibre organisers and closures to be used in optical fibre communication systems Product specifications Singlemode optical fibre fusion splice protectors《用于光纤传递.pdf

《BS EN 50411-3-3-2011 Fibre organisers and closures to be used in optical fibre communication systems Product specifications Singlemode optical fibre fusion splice protectors《用于光纤传递.pdf》由会员分享，可在线阅读，更多相关《BS EN 50411-3-3-2011 Fibre organisers and closures to be used in optical fibre communication systems Product specifications Singlemode optical fibre fusion splice protectors《用于光纤传递.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50411-3-3:2011Fibre organisers and closuresto be used in optical fibrecommunication systems Product specifications -Part 3-3: Singlemode optical fibre fusionsplice protecto

2、rsCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHSBS EN 50411-3-3:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50411-

3、3-3:2011.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/2, Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all t

4、he necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 70628 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of

5、theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IH

6、SBS EN 50411-3-3:2011EUROPEAN STANDARD EN 50411-3-3 NORME EUROPENNE EUROPISCHE NORM December 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B -

7、1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50411-3-3:2011 E ICS 33.180.20 English version Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3:

8、 Singlemode optical fibre fusion splice protectors Organiseurs et botiers de fibres destins tre utiliss dans les systmes de communication par fibres optiques - Spcifications de produits - Partie 3-3: Protecteurs dpissures par fusion de fibres optiques unimodales LWL-Spleikassetten und -Muffen fr die

9、 Anwendung in LWL-Kommunikationssystemen - Produktnormen - Teil 3-3: Fusionsspleischutze fr Einmodenfasern This European Standard was approved by CENELEC on 2011-11-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe

10、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versi

11、ons (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical comm

12、ittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland an

13、d the United Kingdom. Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Resale-,-,-BS EN 50411-3-3:2011EN 50411-3-3:2011 - 2 - Contents Page 1 Scope 61.1 Product definition . 6 1.2 Interoperability 61.3 Expected performance . 61.4 Ope

14、rating environment. 61.5 Reliability 61.6 Quality assurance 62 Normative references 63 Description . 73.1 Fusion splice protector . 73.1.1 General 73.1.2 Heat shrinkable splice protector type . 83.1.3 Fold over or clam shell splice protector type . 83.2 Materials . 93.3 Dimensions 93.4 Colour and ma

15、rking 94 Variants . 95 Dimensional requirements 115.1 Heat shrinkable splice protector (S type) . 115.2 Fold over or clam shell splice protector (F type) 136 Tests 136.1 Introduction 136.2 Test sample preparation 136.3 Test and measurement methods . 136.4 Pass/fail criteria 147 Test report 148 Perfo

16、rmance requirements . 148.1 Dimensional and marking requirements 148.2 Installation requirement 148.3 Optical performance requirements 15Annex A (normative) Fibre type 20Annex B (normative) Sample size and product sourcing requirements 21Annex C (normative) Test sample description and installation 2

17、2C.1 Test sample layout for single fibre fusion splice protector . 22C.2 Preparation of single fibre test samples . 22C.3 Test sample layout for ribbon fibre fusion splice protector. 24C.4 Preparation of ribbon fibre test samples 24Annex D (informative) Silicone band heat shrink fusion splice protec

18、tors . 26Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Resale-,-,-BS EN 50411-3-3:2011- 3 - EN 50411-3-3:2011 Figures Figure 1 Heat shrinkable splice protector 8Figure 2 Fold over or clam shell splice protector . 8Figure 3 Single

19、fibre splice protector variant S1 as assembled . 11Figure 4 Ribbon fibre splice protectors variants S2, S3, S4, S5 as assembled . 11Figure 5 Single fibre splice protector variant S1 (fully recovered) 12Figure 6 Ribbon fibre splice protectors variants S2, S3, S4, S5 (fully recovered) . 12Figure 7 Fol

20、d over or clam shell splice protector (as delivered) 13Figure 8 Fold over or clam shell splice protector (installed) . 13Figure C.1 Test sample layout for single fibre fusion splice protector . 22Figure C.2 Test sample preparation - Step 1 . 22Figure C.3 Test sample preparation - Step 2 . 23Figure C

21、.4 Test sample preparation - Step 3 . 23Figure C.5 Test sample layout for ribbon fibre fusion splice protector . 24Figure C.6 Test sample preparation for ribbon Step 1 24Figure C.7 Test sample preparation for ribbon - Step 2. 25Figure C.8 Test sample preparation for ribbon - Step 3. 25Figure D.1 Hea

22、t shrink splice protector with silicone band 26Figure D.2 Typical silicone band dimensions for recovered diameters 2,2 mm to 2,4 mm . 26Tables Table 1 Optical fibre fusion splice protector, for category U Variants . 9Table 2 Outline and maximum dimensions for heat shrinkable fusion splice protectors

23、 . 12Table 3 Dimensions fold over or clam shell splice protector 13Table 4 Test details and requirements . 15Table A.1 Fibre type characteristics . 20Table B.1 Sample size per test 21Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for R

24、esale-,-,-BS EN 50411-3-3:2011EN 50411-3-3:2011 - 4 - Foreword This document (EN 50411-3-3:2011) has been prepared by CLC/TC 86BXA “Fibre optic interconnect, passive and connectorised components“. The following dates are fixed: latest date by which the EN has to be implemented at national level by p

25、ublication of an identical national standard or by endorsement (dop) 2012-11-14 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-11-14 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ

26、ts. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Resale-,-,-BS EN 50411-3-3:2011- 5 - EN 50411-3-3:2011 Fibre organisers and closures

27、 to be used in optical fibre communication systems - Product specifications Part 3-3: Singlemode optical fibre fusion splice protectors Description Performance Type: Fibre splice protector Application: EN 61753-1:2007, Category U Style: Fusion Operating wavelength: 1 260 nm to 1 625 nm Attenuation g

28、rades Maximum allowed change in attenuation 0,2 dB for 5 protected fusion splices placed in series Fibre category EN 60793-2-50 Type B 1.1 and B 1.3 Return loss grades Not applicable Related documents: EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B

29、 single-mode fibres (IEC 60793-2-50) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for pe

30、rformance standards (IEC 61753-1:2007) Outline and nominal dimensions: LHWS typeLHWF typeProduct as installed or fully recovered Type Fibre W mm H mm L Available lengths mm F1 Single fibre 1,2 3,2 30 S1-12 Single fibre 1,25 1,25 15/20/25/30 S1-13 Single fibre 1,3 1,3 15/20/25/30 S1-16 Single fibre 1

31、,6 1,5 15/20/25/30/40 S1-22 Single fibre 2,2 2,2 25/30/35/40/45 S1-24 Single fibre 2,4 2,4 20/25/35/40/45/60 S1-26 Single fibre 2,6 2,6 35/40/45/60 S1-32 Single fibre 3,2 3,2 45/60 S1-37 Single fibre 3,7 3,7 68 S2-37 Ribbon 4 3,7 3,5 40/45 S3-40 Ribbon 8 4,0 3,7 40/45 S4-45 Ribbon 12 4,5 4,0 25/30/4

32、0/45 Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Resale-,-,-BS EN 50411-3-3:2011EN 50411-3-3:2011 - 6 - 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical a

33、nd environmental performance requirements, which a singlemode fusion splice protector need to meet in order for it to be categorised as an EN standard product. Although in this document the product is qualified for EN 60793-2-50 type B1.1 and B1.3 singlemode fibres it may also be suitable for fusion

34、 splice protection of multimode fibre with 125 m diameter glass cladding and other singlemode fibres with 125 m diameter glass cladding at other wavelengths. 1.2 Interoperability The installed fusion splice protector needs to fit into optical fibre splice cassettes or splice trays. This European Sta

35、ndard specifies the following physical interface dimensions: cross sectional profile with width, height or diameter(in millimetres); length (in millimetres). 1.3 Expected performance In this European Standard, the performance of the fusion splice protector is given with selected fibres as specified

36、in Annex A. 1.4 Operating environment The tests selected combined with the severities and durations are representative of an outdoor enclosed environment defined as category U in EN 61753-1. To ensure that the product can be used in closures, boxes or street cabinet for categories C, A, G and S (as

37、defined EN 61753-1) the specified lower temperature is extended to -40 C and requirements for temporary flooding have been added. 1.5 Reliability Whilst the anticipated service life expectancy of the product in this environment is at least 20 years, compliance with this specification does not guaran

38、tee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.6 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance p

39、rogramme. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50, O

40、ptical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 all parts) Copyright European Committee for Electr

41、otechnical Standardization Provided by IHS under license with CENELECNot for Resale-,-,-BS EN 50411-3-3:2011- 7 - EN 50411-3-3:2011 EN 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance (IEC 61300-1) EN 61300-2-1, Fi

42、bre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention (

43、IEC 61300-2-4) EN 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion (IEC 61300-2-5) EN 61300-2-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-7: Tests Bending

44、 moment (IEC 61300-2-7) EN 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock (IEC 61300-2-9) EN 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Test

45、s Cold (IEC 61300-2-17) EN 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance (IEC 61300-2-18) EN 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measu

46、rement procedures Part 2-22: Tests Change of temperature (IEC 61300-2-22) EN 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist (IEC 61300-2-26) EN 61300-2-45, Fibre optic interconnecting devices and passive compone

47、nts Basic test and measurement procedures Part 2-45: Tests Durability test by water immersion (IEC 61300-2-45) EN 61300-2-46, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests Damp heat cyclic (IEC 61300-2-46) EN 61300-3-3, Fibre optic

48、interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurements Active monitoring of changes in attenuation and return loss (IEC 61300-3-3) EN 61300-3-28, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measu