BS EN 50377-8-12-2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IECb.pdf

《BS EN 50377-8-12-2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IECb.pdf》由会员分享，可在线阅读，更多相关《BS EN 50377-8-12-2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IECb.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationConnector sets and interconnect components to be used in optical fibre communication systems Product specificationsPart 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 ca

2、tegory B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category UBS EN 50377-8-12:2010National forewordThis British Standard is the UK implementation of EN 50377-8-12:2010.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommi

3、ttee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct appl

4、ication. BSI 2010ISBN 978 0 580 65886 0ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 May 2010.Amendments issued since publicationAmd. No. Date Te

5、xt affectedBRITISH STANDARDBS EN 50377-8-12:2010EUROPEAN STANDARD EN 50377-8-12 NORME EUROPENNE EUROPISCHE NORM April 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centr

6、e: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-8-12:2010 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication syste

7、ms - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcific

8、ations de produits - Partie 8-12: Type LSH-APC simplex raccord sur des fibres unimodales de catgorie B1.1 et B1.3 de la CEI 60793-2-50, avec frule en composite de titane, pour utilisation en catgorie U Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produ

9、ktnormen - Teil 8-12: Bauart LSH-APC-Simplex zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Titanium-Komposit-Stift fr die Kategorie U This European Standard was approved by CENELEC on 2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regu

10、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. Th

11、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC membe

12、rs are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia

13、, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50377-8-12:2010EN 50377-8-12:2010 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. It was submitted to the formal vote a

14、nd approved by CENELEC as EN 50377-8-12 on 2010-04-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: la

15、test date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-04-01 _ BS EN 50377-8-12:2010- 3 - EN 50377-8-12:2

16、010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category U Description Performance Coupl

17、ing mechanism: latched push-pull Configuration: plug/adaptor/plug Fibre category: EN 60793-2-50 type B1.1 and B1.3 Cable type: see Table 3 Application:Attenuation grades: (random mate) Return loss grades: For use in Category U (uncontrolled environment) B: 0,12 dB mean 0,25 dB for 97 % of measuremen

18、ts C: 0,25 dB mean 0,50 dB for 97 % of measurements 1: 60 dB (mated) 55 dB (unmated) Related documents: EN 60794-2 Optical fibre cables Part 2: Indoor cables Sectional specification (IEC 60794-2) EN 61300 (series) Fibre optic interconnecting devices and passive components Basic test and measurement

19、procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-15 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 1

20、5: Type LSH connector family (IEC 61754-15) EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance (IEC 61755-1) EN 61755-3-8 Fibre optic interconnecting devices and passive components Fibre optic connector op

21、tical interfaces Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre (IEC 61755-3-8) Outline and maximum dimensions: 34 38 6660max.max.Ref. Ref.30Rmin.30Rmin.BS EN 50377-8-12:2010E

22、N 50377-8-12:2010 - 4 - Contents 1 Scope 6 1.1 Product definition 6 1.2 Intermateability 6 1.3 Operating environment 6 1.4 Reliability . 6 1.5 Quality assurance . 6 2 Normative references 6 3 Description . 7 3.1 Plug . 7 3.2 Adaptor 8 3.3 Materials 8 3.4 Dimensions . 8 3.5 Colour and marking . 8 4 V

23、ariants 9 4.1 Terminated plug 9 4.2 Adaptor 10 5 Dimensional requirements . 11 5.1 Outline dimensions 11 5.1.1 Plug variants . 11 5.1.2 Adaptor variants . 12 5.2 Mating face and other limit dimensions . 15 5.2.1 Plug 15 5.2.2 Ferrule endface geometry and fibre core position after termination. 17 5.2

24、.3 Control of fibre core position and axis 20 5.2.4 Adaptor . 21 5.2.5 Pin gauge for adaptor . 23 6 Tests . 24 6.1 Sample size . 24 6.2 Test and measurement methods 24 6.3 Test sequence. 24 6.4 Pass/fail criteria . 24 7 Test report 24 8 Product qualification requirements . 25 8.1 Dimensional and mar

25、king requirements . 25 8.2 Optical performance requirements 25 8.3 Mechanical performance requirements. 27 Annex A (normative) Adaptor matched reference plug details . 35 Annex B (normative) Sample size and product sourcing requirements . 36 Annex C (informative) Reference connector details . 37 C.1

26、 Reference plug 37 C.2 Test details 37 Bibliography . 38 BS EN 50377-8-12:2010- 5 - EN 50377-8-12:2010 Figures Figure 1 Outline dimensions Plug 11 Figure 2 Outline dimensions Adaptor 12 Figure 3 Mating face and other limit dimensions Plug . 15 Figure 4 Ferrule end face geometry After termination . 1

27、7 Figure 5 Positioning of fibre core 18 Figure 6 Ferrule end face geometry Allowable undercut . 19 Figure 7 Requirements for the attenuation grades for the plug fibre core connected to the ideal reference . 20 Figure 8 Mating face and other dimensions Adaptor . 21 Figure 9 Pin gauge for adaptor . 23

28、 Tables Table 1 Ensured level of random attenuation . 6 Table 2 Preferred colour scheme . 8 Table 3 Plug variants 9 Table 4 Adaptor variants . 10 Table 5 Geometrical parameters 18 Table 6 Optical performance requirements 25 Table 7 Mechanical performance requirements . 27 Table 8 Environmental perfo

29、rmance requirements 32 Table A.1 . 35 Table B.1 . 36 Table C.1 . 37 Table C.2 . 37 BS EN 50377-8-12:2010EN 50377-8-12:2010 - 6 - 1 Scope 1.1 Product definition This standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a termin

30、ated and assembled singlemode resilient alignment sleeve LSH-APC 8 simplex connector set (plug-adaptor-plug), adaptor and patchcord must meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are giv

31、en in 3.5. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing sourc

32、e(s) of the product. When intermating plug variants having different attenuation grades the resulting level of attenuation can not be assured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in an uncertain level of random attenuati

33、on performance. Table 1 Ensured level of random attenuation Plug variant/Attenuation grade C B C C C B C B 1.3 Operating environment The tests selected combined with the severities and durations are representative of a Category U environment as defined in EN 61753-1. 1.4 Reliability Whilst the antic

34、ipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this standard does not g

35、uarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For

36、 undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 61300-2-1 Fibre optic interconnecting devices and passive c

37、omponents - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Part 2-2: Tests Mating durability (IEC 61300-2-2) BS EN 50377-8-12:2010- 7 - EN 50377-8-12:2010 EN 61300-2-4 Part 2-4: Tests Fibre/cable retention (IEC 61300-2-4) EN 61300-2-5 Pa

38、rt 2-5: Tests - Torsion/twist (IEC 61300-2-5) EN 61300-2-6 Part 2-6: Tests Tensile strength of coupling mechanism (IEC 61300-2-6) EN 61300-2-7 Part 2-7: Tests - Bending moment (IEC 61300-2-7) EN 61300-2-12 Part 2-12: Tests Impact (IEC 61300-2-12) EN 61300-2-17 Part 2-17: Tests Cold (IEC 61300-2-17)

39、EN 61300-2-18 Part 2-18: Tests Dry heat High temperature endurance (IEC 61300-2-18) EN 61300-2-22 Part 2-22: Tests - Change of temperature (IEC 61300-2-22) EN 61300-2-26 Part 2-26: Tests - Salt mist (IEC 61300-2-26) EN 61300-2-42 Part 2-42: Tests Static side load for connectors (IEC 61300-2-42) EN 6

40、1300-2-44 Part 2-44: Tests Flexing of the strain relief of fibre optic devices (IEC 61300-2-44) EN 61300-2-46 Part 2-46: Tests - Damp heat (cyclic) (IEC 61300-2-46) EN 61300-3-4 Part 3-4: Examinations and measurements Attenuation (IEC 61300-3-4) EN 61300-3-6 Part 3-6: Examinations and measurements R

41、eturn loss (IEC 61300-3-6) EN 61300-3-10 Part 3-10: Examinations and measurements Gauge retention force (IEC 61300-3-10) EN 61300-3-15 Part 3-15: Examinations and measurements Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15) EN 61300-3-16 Part 3-16: Examinations and measuremen

42、ts Endface radius of spherically polished ferrules (IEC 61300-3-16) EN 61300-3-23 Part 3-23: Examination and measurements Fibre position relative to ferrule endface (IEC 61300-3-23) EN 61300-3-28 Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61300-3-34 Part 3-34: Examin

43、ations and measurements Attenuation of random mated connectors (IEC 61300-3-34) EN 61300-3-42 Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves (IEC 61300-3-42) EN 61753-1 Fibre optic interconnecting devices and p

44、assive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance (IEC 61755-1) ISO 8015 Technical drawings Fund

45、amental tolerancing principle 3 Description The LSH-APC connector is a single position plug connector set of plug-adaptor-plug configuration characterised by a cylindrical, spring loaded butting ferrule of 2,5 mm nominal diameter and a latched push-pull coupling mechanism. The optical alignment mech

46、anism of the connectors is of a resilient sleeve style. 3.1 Plug The plug features a cylindrical composite ferrule using titanium as fibre surrounding material and a push-pull mechanism. It has a single male key which is used to limit and may be used to orientate, the relative rotation between mated

47、 connectors. The plug has mechanical and colour coding. BS EN 50377-8-12:2010EN 50377-8-12:2010 - 8 - 3.2 Adaptor The adaptor has a zirconia ceramic resilient alignment sleeve. The mounting style can be: - square flange 2 hole fixing; - square flange side clip fixing; - square flange top bottom clip

48、 fixing. Covers (dust caps) shall be provided to protect each port of the adaptor. The adaptor has a mechanical colour coding. 3.3 Materials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. 3.4 Dimensions Outline dimensions and

49、 other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an EN Interface Standard this is clearly stated. 3.5 Colour and marking Marking of the product shall be in the following order of precedence: - identification of manufacturer; - ma