BS EN 50377-11-1-2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MF terminated on IEC 60793-2-50 co.pdf

《BS EN 50377-11-1-2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MF terminated on IEC 60793-2-50 co.pdf》由会员分享，可在线阅读，更多相关《BS EN 50377-11-1-2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MF terminated on IEC 60793-2-50 co.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Connector sets and interconnectcomponents to be used in opticalfibre communication systems Product specifications

2、 Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category CBS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 50377-1

3、1-1:2008.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publica

4、tion does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 62089 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the auth

5、ority of the StandardsPolicy and Strategy Committee on 31 July 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50377-11-1 NOR

6、ME EUROPENNE EUROPISCHE NORM February 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploita

7、tion in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-11-1:2008 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-5

8、0 category B1.1 and B1.3 singlemode fibre for category C Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit - Partie 11-1: Type MF raccord sur une fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50

9、pour la catgorie C Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 11-1: Bauart MF zum Anschluss an Einmodenfasern der Kategorien B1.1 und B1.3 nach IEC 60793-2-50 fr Kategorie C This European Standard was approved by CENELEC on 2007-

10、09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob

11、tained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Ce

12、ntral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

13、 Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSIEN 50377-11-1:2008 2 Foreword This European Stand

14、ard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50377-11-1 on 2007-09-01. The following dates were fixed: latest date

15、 by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-09-01 _ BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/E

16、XCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSI 3 EN 50377-11-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for

17、 category C Description Performance Coupling mechanism: back plane Configuration: plug and socket Fibre Category: EN 60793-2-50 type B1.1 and B1.3 Cable Type: See Table 3 Application: Attenuation grades: (Random mated) Return loss grade: For use backplane application (test severities derived from IE

18、C cat C) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements 2: 45 dB Related documents: EN 50173 Information technology Generic cabling systems EN 60794-2-30 Optical fibre cables Part 2-30: Indoor cables Family specification for optical fibre ribbon cab

19、les (IEC 60794-2-30) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 60793-2 Optical fibres Part 2: Product specifications General (IEC 60793-2) EN 61753-1 Fibre optic interconnecting devices and passive component

20、s performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-5 Fibre optic connector interfaces Part 5: Type MT connector family (IEC 61754-5) EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted

21、 fibres General and guidance (IEC 61755-1) EN 61755-3-31)Fibre optic connector optical interfaces Part 3-3: Optical interface angled PC endface rectangular ferrule, single mode fibres (IEC 61755-3-3) 1)At draft stage. BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/

22、2009 06:16, Uncontrolled Copy, (c) BSIEN 50377-11-1:2008 4 Contents 1 Scope. 6 1.1 Product definition. 6 1.2 Intermateability 6 1.3 Operating environment. 6 1.4 Reliability. 6 1.5 Quality assurance . 6 2 Normative references. 6 3 Description . 7 3.1 Plug 7 3.2 Housings. 7 3.3 Materials. 7 3.4 Dimens

23、ions. 7 3.5 Colour and marking 8 4 Variants 8 4.1 Terminated plug . 8 4.2 Housing and adaptor. 9 5 Dimensional requirements 10 5.1 Outline dimensions. 10 5.2 Mating face and other limit dimensions . 13 6 Tests 27 6.1 Sample size. 27 6.2 Test and measurement methods 27 6.3 Test sequence . 27 6.4 Pass

24、/fail criteria 27 7 Test report 27 8 Product qualification requirements . 27 8.1 Dimensional and marking requirements . 27 8.2 Optical performance requirements . 28 8.3 Mechanical performance requirements. 30 8.4 Environmental performance requirements 32 Annex A (normative) Sample size and product s

25、ourcing requirements 34 Annex B (informative) Type MF connector set. 35 Bibliography 36 BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSI 5 EN 50377-11-1:2008 Figure 1 - Outline dimensions - Plug. 10 Figure 2 - Outline dimensions

26、 - Adaptor. 11 Figure 3 - Plug mating face limit dimensions, variant A1 . 13 Figure 4 - Female plug mating face limit dimensions, variant A2. 15 Figure 5 - Fibre core lateral location. 19 Figure 6 - Alignment pin. 19 Figure 7 - End face parameters related to attenuation and physical contact 20 Figur

27、e 8 - Female housing interface, variant B2 . 21 Figure 9 - Male housing interface, variant B3. 23 Figure 10 - Gauge pin dimensions. 25 Figure 11 - Two hole gauge pin 26 Table 1 - Ensured level of random attenuation 6 Table 2 - Preferred colour scheme 8 Table 3 - Plug variants and identifications num

28、ber. 8 Table 4 - Adaptor variants and identification number. 9 Table 5 - Optical performance requirements. 28 Table 6 - Mechanical performance requirements 30 Table 7 - Environmental performance requirements . 32 BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009

29、06:16, Uncontrolled Copy, (c) BSIEN 50377-11-1:2008 6 1 Scope 1.1 Product definition This specification contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode MF 4-fold-connector set (for backplane a

30、pplications) must meet in order to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.5. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resu

31、lting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation ca

32、n not be assured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in an uncertain level of random attenuation performance. Table 1 - Ensured level of random attenuation Plug variant/Attenuation grade C B C C C B C B 1.3 Operating en

33、vironment The tests selected combined with the severities and durations are derived from the category C environment, according to EN 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not gua

34、rantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assuranc

35、e programme. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50

36、 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 60794-2-30 Optical fibre cables Part 2-30: Indoor optical fibre cables Family specification for optical fibre ribbon cables (IEC 60794-2-30) EN 61076-4-100 Connectors for elec

37、tronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100) EN 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measureme

38、nt procedures Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Part 2-2: Tests Mating durability (IEC 61300-2-2) BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Copy, (c) BSI 7 EN 50377-11-1:2008 EN 61300-2-17 Part 2-17:

39、 Tests Cold (IEC 61300-2-17) EN 61300-2-18 Part 2-18: Tests Dry heat - High temperature endurance (IEC 61300-2-18) EN 61300-2-19 Part 2-19: Tests Damp heat (steady state) (IEC 61300-2-19) EN 61300-2-22 Part 2-22: Tests Change of temperature (IEC 61300-2-22) EN 61300-3-28 Fibre optic interconnecting

40、devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61300-3-6 Part 3-6: Examinations and measurements Return loss (IEC 61300-3-6) EN 61300-3-30 Part 3-30: Examinations and measurements Polish angle and fibre

41、 position on single ferrule multifibre connectors (IEC 61300-3-30) EN 61300-3-34 Part 3-34: Examinations and measurements Attenuation of random mated connectors (IEC 61300-3-34) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance fo

42、r performance standards (IEC 61753-1) EN 61754-5 Fibre optic connector interfaces Part 5: Type MT connector family (IEC 61754-5) 3 Description The MF connector is a single position plug connector set of plug and socket configuration characterised by a rectangular, spring loaded butting ferrule with

43、up to 12 fibres and a backplane coupling mechanism. The optical alignment mechanism of the connectors is of a precision pin and hole type. 3.1 Plug The plug features a rectangular thermo plastic composite ferrule and a latched coupling mechanism. A cover (dustcap) to protect the ferrule endface when

44、 the connector is in the unmated condition shall be provided. 3.2 Housings The housings B2 and B3 (see Annex B) have no role in the final alignment mechanism. The mounting style is: EN 61076-4-100 Back plane MF-A/MF-B See Annex A. Covers (dustcaps) shall be provided to protect each port of the adapt

45、or. 3.3 Materials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. The material for the ferrule is Polyphenylene Sulphide (PPS) material with a Youngs modulus of 20 GPa nominal and guide pins which are of stainless steel. Alter

46、native materials, which have compatible material properties, may be used as long as endface and performance requirements are met under all conditions as specified in this document. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance

47、 are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an IEC interface this is clearly stated. BS EN 50377-11-1:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/11/2009 06:16, Uncontrolled Co

48、py, (c) BSIEN 50377-11-1:2008 8 3.5 Colour and marking Marking of the product shall be in the following order of precedence: - identification of manufacturer; - manufacturing date code: year/week; - manufacturers part number; - variant identification number. The following colour coding scheme is pre

49、ferred: Table 2 - Preferred colour scheme Adaptor Delatch housing Blue BluePreferred RAL number 5015. 4 Variants 4.1 Terminated plug The following variants are permitted: Table 3 - Plug variants and identifications number E N 5 0 3 7 7 - 1 1 - 1 - * * - * * * Variant A2 Without pins B1 Back plane Variant C CableF Ribbon fibre Fibre No. Cable Dimensions Fibre Dimensions mm Structure mm Structure 02 3,5 X 2,5 Reinforced cable 0,70 X 0,41 Ribb