BS EN 50345-2009 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines《轨道交通 固定装置 电力牵引 架空接触线路支撑.pdf

《BS EN 50345-2009 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines《轨道交通 固定装置 电力牵引 架空接触线路支撑.pdf》由会员分享，可在线阅读，更多相关《BS EN 50345-2009 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines《轨道交通 固定装置 电力牵引 架空接触线路支撑.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Railway applications Fixed installations Electric traction Insulating syntheticrope assemblies for support ofover

2、head contact linesBS EN 50345:2009National forewordThis British Standard is the UK implementation of EN 50345:2009. It supersedes BS EN 50345:2004 which is withdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/9, Railway electrotechnical applications, to Subcommit

3、tee GEL/9/3, Fixedequipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 58301 8ICS 29

4、.280Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50345:2009EUROP

5、EAN STANDARD EN 50345 NORME EUROPENNE EUROPISCHE NORM June 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All

6、 rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50345:2009 E ICS 29.280 Supersedes EN 50345:2004English version Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead conta

7、ct lines Applications ferroviaires - Installations fixes - Traction lectrique - Montages mettant en oeuvre des cbles synthtiques pour le support des lignes ariennes de contact Bahnanwendungen - Ortsfeste Anlagen - Elektrischer Zugbetrieb - Baugruppen aus isolierenden Kunststoffseilen im Fahrleitungs

8、bau This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

9、cal references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

10、CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga

11、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50345:2009EN 50345:2009 - 2 - Foreword This European Standard was prepared by SC 9XC, Electric supply an

12、d earthing systems for public transport equipment and ancillary apparatus (Fixed installations), of Technical Committee CENELEC TC 9X, Electrical and electronic applications for railways. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50345 on 2009-05-01. Th

13、is European Standard supersedes EN 50345:2004. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN h

14、ave to be withdrawn (dow) 2012-05-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2001/16/EC. See Annex ZZ. _ BS EN 50345:2009- 3 - EN 50345:2009 Contents

15、 Page Introduction . 5 1 Scope. 5 2 Normative references 6 3 Terms and definitions 6 4 Characteristics of the rope 7 4.1 General 7 4.2 Client requirements . 8 4.3 Electrical requirements 8 4.4 Mechanical requirements 10 4.5 Environmental conditions 11 4.6 Fire hazard 11 4.7 Tracking and erosion . 11

16、 5 Design, manufacture and workmanship 11 6 Testing . 12 6.1 General 12 6.2 Design tests for rope types 12 6.3 Type tests 15 6.4 Sampling test . 16 6.5 Manufacturer routine tests . 18 7 Component identification . 18 7.1 Rope identification . 18 7.2 Termination identification. 19 8 Verification of co

17、mpliance 19 8.1 Certification of compliance and test results . 19 8.2 Inspection and testing 19 8.3 Test certificates . 19 8.4 Drawings 20 9 Installation instructions 20 10 Maintenance instructions . 20 11 Delivery and packaging . 21 11.1 Rope 21 11.2 Terminations 21 11.3 Insulators . 22 Annex A (in

18、formative) Intermediate clamps 23 Annex B (informative) Mechanical, chemical and electrical recommendations 24 Annex C (informative) Quality assurance 26 Annex D (normative) Testing . 27 Annex ZZ (informative) Coverage of Essential Requirements of EC Directives . 28 BS EN 50345:2009EN 50345:2009 - 4

19、 - Figure Figure 1 14 Tables Table 1 Voltages excerpt from EN 50124-1, Table A.2 9 Table 2 . 9 Table 3 . 10 Table 4 . 13 Table 5 . 16 Table 6 . 17 Table D.1 Element to submit to tests . 27 BS EN 50345:2009- 5 - EN 50345:2009 Introduction This European Standard has been prepared to provide general gu

20、idance and to define special requirements for the design and testing of insulating synthetic ropes, their sheaths and their terminations for use in electric traction overhead contact lines. Special preferences will include such requirements as to comply with local procurement policies, working pract

21、ices, compatibility with existing systems, to combat environmental pollution and to provide a supporting assembly with insulation which will give reliable service over its target life span. These insulating synthetic ropes offer an alternative to the use of metallic cables associated with convention

22、al insulators. 1 Scope This European Standard applies to the insulating synthetic ropes used in overhead contact lines. This European Standard specifies the characteristics of insulating synthetic rope assemblies and is applicable to electric traction overhead contact lines for railways, light railw

23、ays, tramways, trolleybuses and other systems. These insulating synthetic ropes are utilised to provide mechanical support and electrical insulation for overhead contact lines. They are generally used in the following application fields: delta suspension of contact wires; catenary cable; mid point a

24、nchors; tie; dropper; headspan; noise and vibration damper; bridle- and pulley suspensions; cantilevers made of glass reinforced polymer (GRP). This standard establishes the product characteristics, the test methods and checking procedures to be used with the insulating synthetic ropes, together wit

25、h the ordering and delivery requirements. The object of this standard is to stipulate the provisions for the design and to allow the provisions of the service indicated by the supplier to the purchaser or informed buyer. BS EN 50345:2009EN 50345:2009 - 6 - 2 Normative references The following refere

26、nced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50119:2009, Railway applications - Fixed installations - Electric

27、traction overhead contact lines EN 50124-1:2001, Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment EN 50125-2:2002, Railway applications - Environmental conditions for equipment - Part 2: Fixed

28、electrical installations EN 50163:2004, Railway applications - Supply voltages of traction systems EN 60695-11-10:1999 + A1:2003, Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-11-10:1999 + A1:2003) EN 61109:2008, Insulators for overhead li

29、nes - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria (IEC 61109:2008) EN 62217:2006, Polymeric insulators for indoor and outdoor use with a nominal voltage 1 000 V - General definitions, tes

30、t methods and acceptance criteria (IEC 62217:2005) HD 588.1 S1:1991, High-voltage test techniques - Part 1: General definitions and test requirements (IEC 60060-1:1989 + corrigendum March 1990) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1

31、insulating synthetic rope insulating rope composed of a core protected by a sheath 3.1.1 core of the rope consists of synthetic fibres and is the load carrying component of the rope 3.1.2 sheath of the rope envelope to protect the fibres and made of synthetic material, usually of a continuous polyme

32、ric material with appropriate insulating qualities 3.2 termination means to connect the ends of an insulating synthetic rope between two points 3.3 creepage distance shortest distance along the surface of the insulating material between two conductive parts IEC 60050 (151-15-50) 3.4 gauge length dis

33、tance between the centre lines of the termination anchoring pins or bolts BS EN 50345:2009- 7 - EN 50345:2009 3.5 insulator assembly of an insulating synthetic rope and its associated terminations 3.6 class of insulator insulator which has a specific design end fitting and a specific core/sheath com

34、bination 4 Characteristics of the rope 4.1 General 4.1.1 Common characteristics Two major fibre types are used actually to provide the load carrying core. These are polyester and polyaramid. Other fibre types having similar characteristics may also be used. The fibre type is important in determining

35、 mechanical properties. The sheath polymer type is important in determining durability, environmental performance and some electrical and mechanical properties. 4.1.2 Specific characteristics of core materials Insulating synthetic ropes with polyaramid or similar core fibres have a smaller diameter,

36、 greater tensile fatigue resistance and smaller elongation (see B.1.1) than those of polyester or similar core fibres for a given load carrying capacity and axial stiffness. Insulating synthetic ropes with polyester or similar core fibres have a higher impact resistance than those of polyaramid or s

37、imilar core fibres, for example: from detached trolleybus poles. Insulating synthetic ropes can operate within the following operational environmental temperatures: between 40 C and +55 C for polyester or similar; between 40 C and +80 C for polyaramid or similar. 4.1.3 Specific characteristics of sh

38、eath materials The sheath may be composed of different materials. The type of material shall be chosen to withstand local conditions as: U.V. exposure (e.g. polyethylene); general environmental conditions (e.g. polyethylene); abrasion effects (e.g. polyester / elastomer); flex effects (e.g. polyeste

39、r / elastomer). BS EN 50345:2009EN 50345:2009 - 8 - When the rope is used in confined spaces (e.g. tunnels, stations, etc.) the sheath material shall have further properties as: electrical tracking resistance (e.g. crosslinked polyethylene); antiflammability (e.g. crosslinked polyethylene); self-ext

40、inguishing (e.g. crosslinked polyethylene). 4.2 Client requirements The client shall provide a comprehensive and specific description of the overhead contact line service parameters and functioning requirements which may affect the design of the insulated synthetic rope. This shall include, as appro

41、priate, but not be limited to the following: electrical system service parameters; spatial and dimensional parameters; angular movement deflection limitations; maximum working loads required; environmental conditions; end fittings connection (terminations) requirements; any additional requirement fo

42、r special tests; any special delivery or packaging requirements; identification of inspection and tests to be witnessed by the purchaser; service life of the insulator. 4.3 Electrical requirements 4.3.1 Voltages Values of voltages are shown in Table 1. The rated insulation voltage and the test volta

43、ge levels are based on statistical and risk consideration, which may affect the insulator during its service life. BS EN 50345:2009- 9 - EN 50345:2009 Table 1 Voltages excerpt from EN 50124-1, Table A.2 Nominal voltages UnaRated insulation voltage UNmRated impulse voltage UNiPower frequency withstan

44、d voltage UabkV kV600 V d.c. 720 V d.c. 8 3,6 750 V d.c. 900 V d.c. 12 5,5 1 500 V d.c. 1 800 V d.c. 18 8,3 3 000 V d.c. 3 600 V d.c. 40 18,5 15 kV a.c. 36 kV a.c. 200 95 25 kV a.c. 52 kV a.c. 250 95 aAccording to EN 50163. bAccording to EN 50124-1, Table B.1. 4.3.2 Creepage distances Creepage dista

45、nces shall be determined to withstand the highest permanent voltage of the system. Consideration shall also be given to the type of insulating synthetic rope and its behaviour in polluted conditions related to the whole life of the equipment. The minimum creepage distance, for nominal voltages equal

46、 to or below 1,5 kV d.c. or 1 kV a.c. shall be 1 m. NOTE This distance is based on practical experience. For nominal voltages exceeding 1,5 kV d.c. or 1 kV a.c., an additional creepage distance per extra kV of the nominal voltage shall be calculated from Table 2 and added to the minimum creepage dis

47、tance. EXAMPLE A 25 kV a.c. system with 45 inclination with no waterproof termination and for extreme unfavourable conditions requires a total creepage distance of 3 040 mm. Table 2 Additional creepage distances Waterproof termination No waterproof termination Horizontal 45 inclination and vertical

48、Horizontal 45 inclination and vertical mm/kV mm/kV mm/kV mm/kV Normal operating conditions 30 35 45 55 Unfavourable operating conditions 40 45 60 70 Extreme unfavourable operating conditions 50 55 75 85 NOTE These values are based on practical experience. The creepage distances may be reduced by agr

49、eement between purchaser and supplier. The creepage distance values for nominal voltage up to 1,5 kV d.c. are valid for double insulation. BS EN 50345:2009EN 50345:2009 - 10 - 4.4 Mechanical requirements 4.4.1 Terminations The dimensions and the minimum breaking loads of the insulating synthetic ropes shall be as presented in Table 3. Table 3 Core fibre type Nominal external diameter of the rope Minimum specified breaking load of the rope and its associated terminationmm