BS EN 50132-5-3-2012 Alarm systems CCTV surveillance systems for use in security applications Video transmission Analogue and digital video transmission《报警系统 安全设备用闭路电视监控系统 视频传输 模拟和.pdf

《BS EN 50132-5-3-2012 Alarm systems CCTV surveillance systems for use in security applications Video transmission Analogue and digital video transmission《报警系统 安全设备用闭路电视监控系统 视频传输 模拟和.pdf》由会员分享，可在线阅读，更多相关《BS EN 50132-5-3-2012 Alarm systems CCTV surveillance systems for use in security applications Video transmission Analogue and digital video transmission《报警系统 安全设备用闭路电视监控系统 视频传输 模拟和.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50132-5-3:2012Alarm systems CCTV surveillance systems for use in security applicationsPart 5-3: Video transmission Analogue and digital video transmissionBS EN 50132-5-3:20

2、12 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50132-5-3:2012. Together with BS EN 50132-5-1:2011 and BS EN 50132-5-2:2011, it supersedes BS EN 50132-5:2001, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GW/1

3、/10, Closed circuit television (CCTV). A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards I

4、nstitution 2012. Published by BSI Standards Limited 2012.ISBN 978 0 580 70934 0 ICS 13.310; 33.160.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November

5、 2012. Amendments issued since publicationDate Text affectedBS EN 50132-5-3:2012EUROPEAN STANDARD EN 50132-5-3 NORME EUROPENNE EUROPISCHE NORM June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechn

6、ische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50132-5-3:2012 E ICS 13.310; 33.160.40 English version Alarm systems - CCTV surveillance systems for use in

7、security applications - Part 5-3: Video transmission - Analogue and digital video transmission Systmes dalarme - Systmes de surveillance CCTV usage dans les applications de scurit - Partie 5-3: Transmission vido - Transmission vido analogique et numrique Alarmanlagen - CCTV-berwachungsanlagen fr Sic

8、herungsanwendungen - Teil 5-3: Videobertragung - Analoge und digitale Videobertragung This European Standard was approved by CENELEC on 2012-05-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu

9、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French,

10、 German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Be

11、lgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

12、Kingdom. 2 Contents Foreword . . 4Introduction . . 51 Scope . . 62 Normative references . . 73 Terms, definitions and abbreviations . . 73.1Terms and definitions . . 73.2Abbreviations . 134 Analogue video signal transmission requirements 144.1 General . .144.2 Video input and output . 154.3 Insertio

13、n gain . 154.4 Bandwidth and frequency response . .154.5 Signal to noise ratio . 164.6 Interference . 164.7 Luminance non-linearity . .164.8 Chrominance to luminance gain inequality . .164.9 Chrominance to luminance delay inequality . .164.10 Differential gain . .164.11 Differential phase . 164.12 E

14、nvironmental conditions . .164.13 Electromagnetic radiation . .174.14 Immunity to electromagnetic interference . 174.15 Electrical safety . 175 Analogue video signal transmission test conditions .175.1 Introduction . .175.2 Test equipment . .175.3 Laboratory conditions . .186 Analogue video signal t

15、ransmission performance tests 186.1 Input and output signal levels . .186.2 Insertion gain . 196.3 Input and output impedance . .196.4 DC voltage at the output . .206.5 Short time waveform distortion . .216.6 Line time waveform distortion . .226.7 Field time waveform distortion . 226.8 Damped low fr

16、equency distortion . .226.9 Chrominance to luminance gain and delay inequality .236.10 Signal to noise ratio . 236.11 Interference . 246.12 Luminance non-linearity . .246.13 Differential gain . .256.14 Differential phase . 257 Video signal transmission equipment environmental testing .267.1 Introduc

17、tion . .267.2 Selection of tests and severity . 267.3 Dry heat (operational) . .277.4 Dry heat (endurance) . 287.5 Cold (operational) . .287.6 Damp heat, steady state (operational) . .297.7 Damp heat, steady state (endurance) . 297.8 Damp heat, cyclic (operational) . 30BS EN 50132-5-3:2012 EN 50132-

18、5-3:2012 BS EN 50132-5-3:2012 3 EN 50132-5-3:2012 7.9 Damp heat, cyclic (endurance) . .317.10 Water ingress (endurance) . .317.11 Sulphur dioxide (SO2) (endurance) . 327.12 Salt mist, cyclic (endurance). .327.13 Shock (operational) . 337.14 Vibration, sinusoidal (operational) . 337.15 Vibration, sin

19、usoidal (endurance) . .348Analogue video signal transmission equipment documentation 348.1Documentation . .348.2Marking and labelling . 359High resolution video interface standards Part 5-1: Video transmission General video transmission performance requirements; Part 5-2: Video transmission IP video

20、 transmission protocols; Part 5-3: Video transmission Analogue and digital video transmission; Part 7: Application guidelines. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for id

21、entifying any or all such patent rights. _ 5 Introduction The European Electrotechnical Standardisation Organisation for Alarm Systems together with many governmental organisations, test houses and equipment manufacturers has defined a common framework for Surveillance Video Transmission in order to

22、 achieve interoperability between products. EN 50132-5 is divided into 3 independent subparts: Part 5-1: Video transmission General video transmission performance requirements; Part 5-2: Video transmission IP video transmission protocols; Part 5-3: Video transmission Analogue and digital video trans

23、mission. Each subpart offers its own (sub)clauses on scope, references, definitions, requirements. BS EN 50132-5-3:2012EN 50132-5-3:2012 6 1 Scope The purpose of the transmission system in a closed circuit television (CCTV) installation is to provide reliable transmission of video signals between th

24、e various CCTV equipments in security, safety and monitoring applications. Along with high-resolution video interfaces and transmission, the analogue video signals are still in use today for video transmission and offer interlaced scanning and the film aspect ratio of 4:3. The complexity of a video

25、transmission system varies in accordance with the requirements of the installation. Examples of the different types of video transmission systems covered by this European Standard are as follows: a) using dedicated cable transmission media: coaxial cable; twisted pair cable; fibre optic cable; b) us

26、ing wireless transmission methods: microwave; infrared; radio transmission; NOTE 1 These transmission methods apply to non-compressed video signals. NOTE 2 Multiple analogue video signals may be combined in one physical transmission path using multiplexing techniques. c) using analogue high-resoluti

27、on video interfaces: VESA and VGA; d) using digital uncompressed high-resolution video interfaces: HDMI; DVI. This European Standard specifies the minimum requirements for the specification and testing of the performance of a video transmission channel involving transmitter, receiver or intermediate

28、 devices associated with the selected transmission media, for use in CCTV surveillance systems. Video transmission equipment may be combined with additional functions, e.g. for audio or data transmission. These functions are not included in this European Standard. This European Standard covers the t

29、ransmission of colour and black and white video signals in accordance with the former CCIR Report 624-4, 625 lines, 50 fields per second and today ITU-R Report BT.624-4. IP based video transmission is covered in EN 50132-5-1 and EN 50132-5-2. BS EN 50132-5-3:2012 EN 50132-5-3:2012 7 2 Normative refe

30、rences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

31、EN 50130-4, Alarm systems Part 4: Electromagnetic compatibility Product family standard Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems EN 50130-5:2011, Alarm systems Part 5: Environmental test methods EN 50132-1:2010 + corr. Jun. 2010,

32、Alarm systems CCTV surveillance systems for use in security applications Part 1: System requirements EN 60065, Audio, video and similar electronic apparatus Safety requirements (IEC 60065) EN 60068-1:1994, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corr. Oct. 1988+ A1:199

33、2) EN 60950-1, Information technology equipment Safety Part 1: General requirements (IEC 60950-1) EN 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3) EN 62315-1:2003, DTV profi

34、les for uncompressed digital video interfaces Part 1: General (IEC 62315-1:2003) CCIR Recomm. CMTT 567-3:1990 / ITU-T Recomm. J.61:1990, Transmission performance of television circuits designed for use in international connections CCIR Report 624-4:1990 / ITU-R report BT.624-4:1990, Characteristics

35、of television systems VESA, DisplayPort Standard, Version 1.1a (January 11, 2008) VESA Monitor Timing Specifications, Industry Standards and Guidelines for Computer Display Monitor Timing (DMT), Version 1.0, Revision 11 (May 1, 2007) VESA, Video Signal Standard (VSIS), Version 1, Rev. 2 (December 12

36、, 2002) VESA, Enhanced Display Data Channel (E-DDC) Standard, v.1.1 (March 24, 2004), pages 17-18 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 analogue continuous electrical signal that carries in

37、formation in the form of variable physical values, such as amplitude or frequency modulation and that moves through a continuous range of settings or levels 3.1.2 analogue components video signals in which a continuously variable voltage or current (rather than a set of digital numbers) represents a

38、 pixel BS EN 50132-5-3:2012EN 50132-5-3:2012 8 3.1.3 analogue interface interface between a video source and a video input in which pixel colours are determined by the voltage levels on three output lines (RGB) Note 1 to entry: Theoretically, an unlimited number of colours can be supported by this m

39、ethod (24 bits per pixel allows 16 777 216 colours). The voltage level on any line varies between 0 V (for black) to about 700 mV (for maximum brightness). 3.1.4 analogue monitor video monitor which accepts analogue signals such as composite video, RGB described as single pel representing one of the

40、 two colour difference signals related to the primary colours in the manner defined in the bit stream. The symbols used for the colour difference signals are Cr and Cb. 3.1.11 chrominance data that represents one of the two colour difference signals Cr and Cb in a video picture, which can be further

41、 broken down into two properties of colour: hue and saturation Note 1 to entry: See also chroma in 3.1.10. 3.1.12 chrominance signal part of the video signal that contains the colour information Note 1 to entry: In composite video, the chrominance signal is multiplexed at a higher frequency than the

42、 signal and transmitted down the same cable. In S-VHS, this signal is transmitted along a separate cable. BS EN 50132-5-3:2012 EN 50132-5-3:2012 9 3.1.13 colour depth number of bits used for a pixel, determining the maximum number of colours that can be displayed at one time 3.1.14 component CCTV sy

43、stem in which chrominance and luminance are distributed separately 3.1.15 component analogue unencoded output of a camera or recorder, etc., consisting of three primary colour signals: red, green, and blue (RGB) that together convey all necessary picture information Note 1 to entry: In some componen

44、t video formats, these three components have been translated into a luminance signal and two colour difference signals, for example, Y, B-Y, R-Y. 3.1.16 component colour structure of a video signal wherein the R, G, and B signals are kept separate from each other or wherein luminance and two band-li

45、mited colour-difference signals are kept separate from one another Note 1 to entry: The separation may be achieved by separate channels, by time-division multiplexing or by a combination of both. 3.1.17 component video analogue component video which exists in the form of three separate signals, all

46、of which are required in order to specify the colour picture completely Note 1 to entry: Most CCTV video signals consist of combined (composite) video signals, composed of luminance (brightness) information, chrominance (colour) information, and sync information. Note 2 to entry: Component video com

47、es in several varieties: RGB (red, green, blue), YUV (luminance, sync, and red/blue) and Y/C (luminance and chrominance), used by S-Video systems. 3.1.18 composite a) CCTV system in which chrominance and luminance are combined into a single signal, as they are in PAL; b) any single signal comprised

48、of several components 3.1.19 composite analogue encoded video signal, such as PAL video, that includes horizontal and vertical synchronizing information 3.1.20 conductance real (non-reactive) part of the admittance of a circuit, where admittance is the reciprocal of impedance 3.1.21 conducted interf

49、erence interference that occurs because of inductive or capacitive coupling 3.1.22 conductor losses power losses due to the resistance of conductors BS EN 50132-5-3:2012EN 50132-5-3:2012 10 3.1.23 connector attachment on the end of a cable that allows interconnection to other cables 3.1.24 decibel measure of the