BS EN 50132-1-2010 Alarm systems CCTV nsurveillance systems for nuse in security applications nPart 1 System requirements《警报系统 安全设备用CCTV监测系统 第1部分 系统要求》.pdf

《BS EN 50132-1-2010 Alarm systems CCTV nsurveillance systems for nuse in security applications nPart 1 System requirements《警报系统 安全设备用CCTV监测系统 第1部分 系统要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50132-1-2010 Alarm systems CCTV nsurveillance systems for nuse in security applications nPart 1 System requirements《警报系统 安全设备用CCTV监测系统 第1部分 系统要求》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationAlarm systems CCTV surveillance systems for use in security applicationsPart 1: System requirementsBS EN 50132-1:2010Incorporating corrigendum 2010June Licensed Copy: Wang Bin, I

2、SO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 50132-1:2010,The UK participation in its preparation was entrusted by Technical CommitteeGW/1, Electronic security systems, to Subcommittee GW/1/10, Closed c

3、ircuittelevision (CCTV).A list of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 72198 4 ICS 1

4、3.310; 13.320; 33.160.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2010.Amendments/corrigenda issued since publicationAmd. No. Date Text affectedBR

5、ITISH STANDARDBS EN 50132-1:2010corrigendum incorporating Implementation of CENELEC June 2010.30 September 2010corrigendum June 2010: modification to 6.3.2.2.2Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50132-1 NORME EUROPEN

6、NE EUROPISCHE NORM March 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any for

7、m and by any means reserved worldwide for CENELEC members. Ref. No. EN 50132-1:2010 E ICS 13.310;33.160.40 English version Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements Systmes dalarme - Systmes de surveillance CCTV usage dans les applicatio

8、ns de scurit - Partie 1: Exigences systme Alarmanlagen - CCTV-berwachungsanlagen fr Sicherungsanwendungen - Teil 1: Systemanforderungen This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in t

10、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechn

11、ical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

12、erland and the United Kingdom. corrigendum Incorporating June 2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSIEN 50132-1:2010 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 79, Alarm systems. It was submitte

13、d to the formal vote and approved by CENELEC on 2010-03-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixe

14、d: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-03-01 EN 50132 will consist of the following

15、parts, under the general title Alarm systems CCTV surveillance systems for use in security applications: Part 1: System requirements; Part 5: Video transmission; Part 7: Application guidelines. _ BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled

16、Copy, (c) BSI 3 EN 50132-1:2010 Contents Introduction . 5 1 Scope 6 2 Normative references . 6 3 Definitions and abbreviations 7 3.1 Definitions . 7 3.2 Abbreviations 20 4 Functional description of the CCTV system (informative) . 21 4.1 CCTV system 21 4.2 Video environment 22 4.3 System management .

17、 24 4.4 System security . 27 5 Security grading . 27 6 Functional requirements 28 6.1 Video environment 29 6.2 System management . 32 6.3 System security . 34 6.4 Environmental requirements 39 7 Environmental classes . 39 7.1 Generalities . 39 7.2 Environmental Class I Indoor 39 7.3 Environmental Cl

18、ass II Indoor General 39 7.4 Environmental Class III Outdoor Sheltered 40 7.5 Environmental Class IV Outdoor General 40 8 Documentation . 40 8.1 System documentation 40 8.2 Instructions relating to operation . 40 8.3 System component documentation 40 Annex A (normative) Special national conditions 4

19、1 Bibliography 42 BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSIEN 50132-1:2010 4 Figures Figure 1 CCTV system . 22 Figure 2 Example for CCTV system . 23 Figure 3 Activity management 26 Figure 4 Risk and security grades 28 Tables

20、 Table 1 Storage 30 Table 2 Archiving and backup 31 Table 3 System logs . 33 Table 4 Monitoring of interconnections. 35 Table 5 Tamper detection . 35 Table 6 Level of access 36 Table 7 Authorisation code requirements . 37 Table 8 Data access . 37 Table 9 Access to system logs . 37 Table 10 Access to

21、 system set-up 38 Table 11 Data labelling . 38 BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSI 5 EN 50132-1:2010 Introduction This European Standard applies to CCTV Systems for surveillance of private and public areas. It includes

22、 four security grades and four environmental classes. This European Standard is intended to assist CCTV System companies, manufacturers, system integrators, installer, consultants, owner, users, insurers and law enforcement in achieving a complete and accurate specification of the surveillance syste

23、m. This European Standard does not specify the type of technology or the required image quality needed for a certain observation task. Due to the wide range of CCTV system applications like security, safety, public safety etc. only the minimum requirements are covered in this European Standard. For

24、achieving an optimal surveillance system in terms of design, planning, operation, installation and maintenance, follow the Application Guidelines of EN 50132-7:1996. The specified operational requirements (Clause 5) should enable the above mentioned stakeholders to choose the functions that are impo

25、rtant for their application with due consideration to the risk. Special National standards apply as well. This European Standard is not intended to be used for testing individual CCTV components. BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled

26、Copy, (c) BSIEN 50132-1:2010 6 1 Scope This European Standard specifies the minimum requirements for CCTV Surveillance Systems installed for security applications. This European Standard specifies the minimum performance requirements and functional requirements to be agreed on between customer and s

27、upplier in the operational requirement, but does not include requirements for design, planning, installation, testing, operation or maintenance (see Application Guidelines in EN 50132-7:1996). This European Standard excludes installation of remotely monitored detector activated CCTV systems. This Eu

28、ropean Standard also applies to CCTV Systems sharing means of detection, triggering, interconnection, control, communication and power supplies with other applications. The operation of a CCTV System shall not be adversely influenced by other applications. Requirements are specified for CCTV compone

29、nts where the relevant environment is classified. This classification describes the environment in which the CCTV component may be expected to operate as designed. When the requirements of the four environmental classes are inadequate, due to the extreme conditions experienced in certain geographic

30、locations, special national conditions may be applied. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

31、ing any amendments) applies. CLC/TS 50398 Alarm systems Combined and integrated alarm systems General requirements EN 50130-4 Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN 50130-5 Alarm

32、systems Part 5: Environmental test methods EN 50132-7:1996 Alarm systems CCTV surveillance systems for use in security applications - Part 7: Application guidelines EN 60065 Audio, video and similar electronic apparatus Safety requirements (IEC 60065) EN 60950-1 Information technology equipment Safe

33、ty Part 1: General requirements (IEC 60950-1) EN 61000-6-3 Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3) BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/20

34、10 06:57, Uncontrolled Copy, (c) BSI 7 EN 50132-1:2010 3 Definitions and abbreviations 3.1 Definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 access levels level of access to particular functions of the CCTV system, defining the user rights of the operato

35、r, to control and configure the system as well as the access to datas on the CCTV system 3.1.2 acknowledge action of a user to accept a message or an indication 3.1.3 action deliberate operation or act by the user which is part of alarm procedure 3.1.4 Advanced Streaming Format proprietary digital a

36、udio/digital video container format, especially meant for streaming media 3.1.5 alarm warning of the presence of any hazard to life, property or the environment 3.1.6 alarm condition condition of an alarm system, or part thereof, which results from the response of the system to the presence of a haz

37、ard 3.1.7 alarm message message from the system to the operator, to describe time, type and location of an alarm 3.1.8 alarm procedure indications and manual or automatic controls as response to an alarm condition 3.1.9 alarm receiving centre continuously manned centre to which information concernin

38、g the status of one or more alarm systems is reported 3.1.10 alert warning addressed to persons in the danger environment or request for human intervention (police, fire brigade, etc.), caused by alarm, tamper or fault NOTE Sometimes the term “alarm warning” is used instead. EXAMPLE Visual-alert, ac

39、oustic/ audible-alert, external-alert. 3.1.11 alternative device CCTV system component of the same type like the primary device BS EN 50132-1:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSIEN 50132-1:2010 8 3.1.12 alternative power source power

40、 source capable of powering the system for a predetermined time when a prime power source is unavailable 3.1.13 archive data stored on a long term permanent, or partially permanent storage EXAMPLE CDs or digital tape are considered to be archived. 3.1.14 area of interest region in the scene monitore

41、d by an image capturing device 3.1.15 attended operator desk continuously manned workstation 3.1.16 archiving see image data backup 3.1.17 audio video interleave format proprietary multimedia format containing audio and video data in a standard container that allows synchronous audio-with-video play

42、back 3.1.18 authentication method to verify whether an image has been altered 3.1.19 authorization permission to gain access to specified functions or components of a CCTV system 3.1.20 authorisation codes physical or logical keys which permit access to CCTV functions 3.1.21 automatic number plate r

43、ecognition optical character recognition on images to read and extract the alphanumerics of the licence plate of vehicles 3.1.22 automatic teller machine device that provides a method of financial transactions in public space without the need for a human clerk 3.1.23 backup image an accurate and com

44、plete replica of the primary image, irrespective of media 3.1.24 bandwidth (relating to interconnection) data transfer rate or amount of data that can be transferred from one point to another in a given time period NOTE Bandwidth is quoted in bits per s. BS EN 50132-1:2010Licensed Copy: Wang Bin, IS

45、O/EXCHANGE CHINA STANDARDS, 30/12/2010 06:57, Uncontrolled Copy, (c) BSI 9 EN 50132-1:2010 3.1.25 capacity (relating to recording) the total amount of stored information that a storage media or medium can hold. It is expressed as a quantity of bits or bytes 3.1.26 charge coupled device sensor of ima

46、ging device, consisting of an integrated circuit with an array of linked, or coupled, light-sensitive capacitors 3.1.27 CCTV system system consisting of camera equipment, storage, monitoring and associated equipment for transmission and controlling purposes 3.1.28 channel single path for conveying d

47、igital or analogue data, distinguished from other parallel paths EXAMPLE Video input or output channel. 3.1.29 checksum unique value or key computed by an algorithm for a data packet, based on the information it contains NOTE It is passed along with the data to authenticate that the data has not bee

48、n tampered with. Any change to the image data, metadata or image sequence would cause a change in the resultant checksum. 3.1.30 compression the process of reducing the size of a data (image) file 3.1.31 compression rate ratio of a files or images uncompressed size compared to its compressed size NO

49、TE A high compression rate means smaller image files and lower image quality and vice versa. 3.1.32 common interconnection interconnection used by several video and data channels and/or other applications 3.1.33 communication transmission of messages and/or signals between CCTV components 3.1.34 component functional part of the CCTV system 3.1.35 continually recurring frequently at regular intervals BS EN 50132-1:2010Licensed Copy: Wang B