BS EN 45510-4-7-1999 Guide for the procurement of power station equipment - Boiler auxiliaries - Ash handling plant - Ash handling plant《发电站设备采购指南 锅炉附属设备 炉灰装运设备》.pdf

《BS EN 45510-4-7-1999 Guide for the procurement of power station equipment - Boiler auxiliaries - Ash handling plant - Ash handling plant《发电站设备采购指南 锅炉附属设备 炉灰装运设备》.pdf》由会员分享，可在线阅读，更多相关《BS EN 45510-4-7-1999 Guide for the procurement of power station equipment - Boiler auxiliaries - Ash handling plant - Ash handling plant《发电站设备采购指南 锅炉附属设备 炉灰装运设备》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-4-7:1999 The

2、European Standard EN 45510-4-7:1999 has the status of a British Standard ICS 27.060.30; 27.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 7: Ash handling plantThis British Standard, having

3、 been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 09-1999 ISBN 0 580 32507 5 BS EN 45510-4-7:1999 Amendments issued since publication Amd. No. Date Comments National fore

4、word This British Standard is the English language version of EN 45510-4-7:1999. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; present to the responsibl

5、e European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secret

6、ary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards

7、Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages Th

8、is document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.CEN CENELEC CEN Central Secretariat: CENELEC Central Secretariat: rue de Stassart, 36 B-1050

9、Brussels rue de Stassart, 35 B-1050 Brussels 1999 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-4-7:1999 E EUROPEAN STANDARD EN 45510-4-7 NORME EUROPE ENNE EUROPA ISCHE NORM April 1999 ICS 27

10、.040; 27.100 English version Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 7: Ash handling plant Guide pour lacquisition dequipements destine s aux centrales de production de lectricite Partie 4: Auxiliaires de chaudie re Section 7: Manutention des machefers Lei

11、tfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teil 4: Nebenanlagen Hauptabschnitt 7: Aschetransportanlage This European Standard was approved by CEN/CENELEC on 1 April 1999. CEN/CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio

12、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN/CENELEC member. This European Standard exists in t

13、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN/CENELEC members are the national standards bo

14、dies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 45510-4-7:1999 BSI 09-1999 Foreword This European Standard has been prepared by Technical C

15、ommittee CEN/CLC JTFPE, Joint Task Force Power Engineering, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1999, and conflicting national standard

16、s shall be withdrawn at the latest by October 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland,

17、Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This standard takes the form of a recommendation and is therefore entitled a “Guide” This Guide for procurement is a part of a series of Guides mandated to cover the procurement of power sta

18、tion plant and equipment in conformity with European Procurement Directives. The Guides are: EN 45510, Guide for procurement of power station equipment Part 1: Common clauses. Part 2-1: Electrical equipment Power transformers. Part 2-2: Electrical equipment Uninterruptible power supplies. Part 2-3:

19、Electrical equipment Stationary batteries and chargers. Part 2-4: Electrical equipment High power static converters. Part 2-5: Electrical equipment Motors. Part 2-6: Electrical equipment Generators. Part 2-7: Electrical equipment Switchgear and control gear. Part 2-8: Electrical equipment Power cabl

20、es. Part 2-9: Electrical equipment Cabling systems. Part 3-1: Boilers Water tube boilers. Part 3-2: Boilers Shell boilers. Part 3-3: Boilers Boilers with fluidized bed firing. Part 4-1: Boiler auxiliaries Equipment for reduction of dust emissions. Part 4-2: Boiler auxiliaries Gas-air, steam-air and

21、gas-gas heaters. Part 4-3: Boiler auxiliaries Draught plant. Part 4-4: Boiler auxiliaries Fuel preparation equipment. Part 4-5: Boiler auxiliaries Coal handling and bulk storage plant. Part 4-6: Boiler auxiliaries Flue gas desulphurisation (De-S0 x ) plant. Part 4-7: Boiler auxiliaries Ash handling

22、plant. Part 4-8: Boiler auxiliaries Dust handling plant. Part 4-9: Boiler auxiliaries Sootblowers. Part 4-10: Boiler auxiliaries Flue gas denitrification (De-N0 x ) plant. Part 5-1: Turbines Steam turbines. Part 5-2: Turbines Gas turbines. Part 5-3: Turbines Wind turbines. Part 5-4: Turbines Hydraul

23、ic turbines, storage pumps and pump-turbines. Part 6-1: Turbine auxiliaries Deaerators. Part 6-2: Turbine auxiliaries Feedwater heaters. Part 6-3: Turbine auxiliaries Condenser plant. Part 6-4: Turbine auxiliaries Pumps. Part 6-5: Turbine auxiliaries Dry cooling systems. Part 6-6: Turbine auxiliarie

24、s Wet and wet/dry cooling towers. Part 6-7: Turbine auxiliaries Moisture separator reheaters. Part 6-8: Turbine auxiliaries Cranes. Part 6-9: Turbine auxiliaries Cooling water systems. Part 7-1: Pipework and valves High pressure piping systems. Part 7-2: Pipework and valves Boiler and high pressure

25、piping valves. Part 8-1: Control and instrumentation. EN 45510-1 contains those clauses common to all the above Guides giving the provisions of a non equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”,

26、as appropriate, also appear in italics in the documents specific to particular equipment. In this Guide, words in bold type indicate that they have the meaning given in the Definitions clause 3. In this Guide, words and sentences not in italics are specific to this Guide and refer to the particular

27、equipment covered.Page 3 EN 45510-4-7:1999 BSI 09-1999 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizational terms 4 3.2 Technical terms 5 3.3 General terms 6 4 Brief overall project description 7 4.1 Role and organization of purchaser 7 4.2 Site location 7 4

28、.3 Equipment task 7 4.4 Equipment to be purchased 8 4.5 Control and instrumentation 8 4.6 Electrical supplies and other services 8 4.7 Other interfaces 8 4.8 Project programme 8 4.9 Equipment identification systems 8 5 Extent of supply 8 6 Terminal points 9 7 Operational requirements 9 7.1 Operating

29、 environment 9 7.2 Manning levels 9 7.3 Normal operation 9 7.4 Operating hours 10 7.5 Start-up and shut-down 10 7.6 Abnormal conditions 10 7.7 Further operational requirements 10 8 Life expectancy 10 8.1 Design life 10 8.2 Components requiring periodic maintenance 10 9 Performance requirements 10 9.

30、1 Duty 10 9.2 Performance 11 9.3 Equipment margins 11 9.4 Availability 11 9.5 Levels of component redundancy 11 9.6 Further performance requirements 11 10 Design and fabrication 11 10.1 Specific equipment features 11 Page 10.2 Design justification 12 10.3 Material selection 12 10.4 Safety 12 10.5 In

31、terchangeability 13 10.6 Fabrication methods 13 11 Maintenance requirements 13 11.1 Planned maintenance 13 11.2 Personnel safety 13 11.3 Requirements for access 13 11.4 Lifting requirements 13 11.5 Special tools 13 11.6 Test equipment 13 11.7 Spare parts strategy 13 11.8 Special precautions 14 12 Te

32、chnical documentation requirements 14 12.1 Tender documentation 14 12.2 Contract documentation 14 13 Applicable legislation, regulations, standards and further requirements 14 13.1 Legislation and regulations 14 13.2 Standards 14 13.3 Further requirements 14 14 Evaluation criteria 14 14.1 General 14

33、 14.2 Technical criteria 15 15 Quality measures 15 15.1 General 15 15.2 Approvals procedure 15 15.3 Inspection requirements 15 15.4 Non-conformity 15 16 Site factors 15 16.1 Access 15 16.2 Facilities 15 16.3 Site specific requirements 16 17 Verification of specified performance 16 17.1 General 16 17

34、.2 Works tests 16 17.3 Test during installation and commissioning 16 17.4 Technical conditions for trial run 16 17.5 Functional and performance tests 17 Annex A (informative) Bibliography 17Page 4 EN 45510-4-7:1999 BSI 09-1999 1 Scope This standard gives guidance on writing the technical specificati

35、on for the procurement of equipment for ash handling associated with coal-fired steam generating plant for use in electricity generating stations (power stations).This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other poss

36、ible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers mechanical conveying systems which handle the ash mechanically. Among those are, for example: submerged scraper conveyor; ram-type slag extractor; belt conveyor; drag-link conveyor; vibra

37、tory conveyor; screw conveyor; apron conveyor; bucket elevator; skip hoist; vehicles. Hydraulic conveying systems use water as conveying medium. These include, for example: water-filled ash hopper; dry ash hopper; sluiceway; slurry pump with pipeline; ejector with pipeline. Generally a combination o

38、f the above systems is employed. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indic

39、ates to potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems such as the boiler and gas treatment plant; predicted performance is achieved; ancillary equipment is properly sized; reliability,

40、availability and safety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract, which is

41、 normally decided on the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues, which are normally in separate parts of an enquiry; any allocation of responsibilities, which are determined by the contract. This Guide does not prescribe the arrangeme

42、nt of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment. 2 Normative references This Guide for procurement incorporates by dated or undated reference, provisions

43、from other publications. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Guide only when incorporated in it by amendment or rev

44、ision. For undated references, the latest edition of the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, development, production, installation and servicing (ISO 9001:1994). EN ISO 9002 Quality systems Model for quality assurance in production, in

45、stallation and servicing (ISO 9002:1994). IEC 60050 (191) International electrotechnical vocabulary. 3 Definitions For the purposes of this Guide, the following definitions apply. 3.1 Organizational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier 3.1.2 supplier p

46、erson or organization that provides a product and/or a service to the purchaserPage 5 EN 45510-4-7:1999 BSI 09-1999 3.1.3 specification document stating technical requirements of the purchaser. It may form part of an enquiry issued by a purchaser 3.1.4 enquiry invitation to tender issued by a purcha

47、ser. It will normally include a specification together with the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or organization submitting a tender for the equipment in response to the enquiry 3.1.7 site place to w

48、hich the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the purchaser, use for the purposes of the contract NOTE Further definitions of useful organizational terms may be found in EN ISO

49、 8402 (see annex A). 3.2 Technical terms 3.2.1 Operating conditions 3.2.1.1 ash handling plant equipment comprising devices for extraction, conveying, intermediate storage, treatment and loading for delivery by means of mechanical or hydraulic systems which together form a system to remove combustion residues such as ash or slag for utilization or dumping 3.2.1.2 ash residue of fuel after combustion consisting of minera