BS EN 45510-2-8-2004 Guide for procurement of power station equipment - Electrical equipment - Power cables《发电站设备采购指南 电气设备 电力电缆》.pdf

《BS EN 45510-2-8-2004 Guide for procurement of power station equipment - Electrical equipment - Power cables《发电站设备采购指南 电气设备 电力电缆》.pdf》由会员分享，可在线阅读，更多相关《BS EN 45510-2-8-2004 Guide for procurement of power station equipment - Electrical equipment - Power cables《发电站设备采购指南 电气设备 电力电缆》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 45510-2-8:2004 Guide for procurement of power station equipment Part 2-8: Electrical equipment Power cables The European Standard EN 45510-2-8:2004 has the status of a British Standard ICS 27.100; 29.060.20 BS EN 45510-2-8:2004 This British Standard was published under the aut

2、hority of the Standards Policy and Strategy Committee on 6 December 2004 BSI 6 December 2004 ISBN 0 580 44971 8 National foreword This British Standard is the official English language version of EN 45510-2-8:2004. The UK participation in its preparation was entrusted to Technical Committee E/-/20,

3、Power engineering steering committee, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be

4、found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are r

5、esponsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and ke

6、ep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displa

7、yed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 45510-2-8 September 2004 ICS 27.100; 29.060.20 English version Guide for procurement of power station equipment - Part 2-8

8、: Electrical equipment - Power cables Guide pour lacquisition dquipements destins aux centrales de production dlectricit - Partie 2-8: Equipements lectriques - Cbles de puissance Leitfaden fr die Beschaffung von Ausrstungen fr Kraftwerke - Teil 2-8: Elektrische Ausrstung - Starkstromkabel This Europ

9、ean Standard was approved by CEN and CENELEC on 6 March 2001. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogr

10、aphical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

11、ibility of a CEN or CENELEC member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Cyprus, Czech Republ

12、ic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN Management Centre: CENELEC Central Secretariat: rue de Stassar

13、t, 36 B-1050 Brussels rue de Stassart, 35 B-1050 Brussels 2004 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-2-8:2004 EEN 45510-2-8:2004 - 2 - CONTENTS Foreword 4 1 Scope. 6 2 Normative refer

14、ences. 6 3 Definitions 7 3.1 Organisational terms 7 3.2 Technical terms 8 3.3 General terms. 8 4 Brief overall project description. 9 4.1 Role and organisation of purchaser. 9 4.2 Site location . 9 4.3 Equipment task 9 4.4 Equipment to be purchased . 9 4.5 Control and instrumentation 10 4.6 Electric

15、al supplies and other services 10 4.7 Other interfaces . 10 4.8 Project programme 10 4.9 Equipment identification systems 10 5 Extent of supply. 10 6 Terminal points 11 7 Operational requirements 11 7.1 Operating environment 11 7.2 Manning levels . 11 7.3 Normal operation . 11 7.4 Operating hours. 1

16、1 7.5 Start-up and shut-down . 11 7.6 Abnormal conditions 11 7.7 Further operational requirements 11 8 Life expectancy 11 9 Performance requirements. 12 10 Design and fabrication . 12 10.1 Specific equipment features. 12 10.2 Design justification 13 10.3 Material selection . 13 10.4 Safety. 13 10.5

17、Interchangeability 14 10.6 Fabrication methods 14 11 Maintenance requirements. 14 12 Technical documentation requirements. 14 12.1 Tender documentation. 14 12.2 Contract documentation 14 13 Applicable legislation, regulations, standards and further requirements. 14 13.1 Legislation and regulations 1

18、4 13.2 Standards. 15 13.3 Further requirements . 15 14 Evaluation criteria 15 14.1 General. 15 14.2 Technical criteria 15 - 3 - EN 45510-2-8:2004 15 Quality measures . 16 15.1 General. 16 15.2 Approvals procedure . 16 15.3 Inspection requirements 16 15.4 Non-conformity 16 16 Site factors. 16 16.1 Ac

19、cess . 16 16.2 Facilities. 17 16.3 Site specific requirements 17 17 Verification of specified performance 17 17.1 General. 17 17.2 Works tests 17 17.3 Tests during installation and commissioning 17 17.4 Technical conditions for trial run . 17 17.5 Functional and performance tests . 17 Annex A (infor

20、mative)Bibliography 18 Annex B (informative)Information for selection of power cables . 19 EN 45510-2-8:2004 - 4 - Foreword This standard takes the form of a recommendation and is therefore entitled a “Guide”. This Guide for procurement has been prepared by the CEN/CENELEC Joint Task Force Power Eng

21、ineering (JTFPE) of which the secretariat is held by the British Standards Institution. The text of the draft was submitted to the formal vote and was approved by CEN and CENELEC as EN 45510-2-8 on 2001-03-06. The following dates were fixed: - latest date by which the EN has to be implemented at nat

22、ional level by publication of an identical national standard or by endorsement (dop) 2005-03-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-03-01 This Guide for procurement has been prepared under mandates given to CEN and CENELEC by the Euro

23、pean Commission and the European Free Trade Association. This Guide for procurement is a part of a series of Guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The Guides are: EN 45510: Guide for procurement of power stat

24、ion equipment Part 1: Common clauses Part 2-1: Electrical equipment - Power transformers Part 2-2: Electrical equipment - Uninterruptible power supplies Part 2-3: Electrical equipment - Stationary batteries and chargers Part 2-4: Electrical equipment - High power static convertors Part 2-5: Electric

25、al equipment - Motors Part 2-6: Electrical equipment - Generators Part 2-7: Electrical equipment - Switchgear and controlgear Part 2-8: Electrical equipment - Power cables Part 2-9: Electrical equipment - Cabling systems Part 3-1: Boilers - Water tube boilers Part 3-2: Boilers - Shell boilers Part 3

26、-3: Boilers - Boilers with fluidized bed firing Part 4-1: Boiler auxiliaries - Equipment for reduction of dust emissions Part 4-2: Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler auxiliaries - Draught plant Part 4-4: Boiler auxiliaries - Fuel preparation equipment Part 4

27、-5: Boiler auxiliaries - Coal handling and bulk storage plant Part 4-6: Boiler auxiliaries - Flue gas desulphurization ( De-SO x ) plant Part 4-7: Boiler auxiliaries - Ash handling plant Part 4-8: Boiler auxiliaries - Dust handling plant Part 4-9: Boiler auxiliaries - Sootblowers Part 4-10: Boiler a

28、uxiliaries - Flue gas denitrification (De-NO x ) plant Part 5-1: Turbines - Steam turbines Part 5-2: Turbines - Gas turbines Part 5-3: Turbines - Wind turbines Part 5-4: Turbines - Hydraulic turbines, storage pumps and pump-turbines - 5 - EN 45510-2-8:2004 Part 6-1: Turbine auxiliaries - Deaerators

29、Part 6-2: Turbine auxiliaries - Feedwater heaters Part 6-3: Turbine auxiliaries - Condenser plant Part 6-4: Turbine auxiliaries - Pumps Part 6-5: Turbine auxiliaries - Dry cooling systems Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers Part 6-7: Turbine auxiliaries - Moisture separato

30、r reheaters Part 6-8: Turbine auxiliaries - Cranes Part 6-9: Turbine auxiliaries - Cooling water systems Part 7-1: Pipework and valves - High pressure piping systems Part 7-2: Pipework and valves - Boiler and high pressure piping valves Part 8-1: Control and instrumentation EN 45510-1 contains those

31、 clauses common to all the above Guides giving the provisions of a non equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular

32、equipment. Where parts of the “common clauses” are omitted, this is indicated by the symbol *. Where minor changes have been made to sentences in the “common clauses” these are marked by a vertical line in the left margin. In this Guide, words in bold type indicate that they have the meaning given i

33、n the definitions, clause 3. In this Guide, words and sentences not in italics are specific to this Guide and refer to the particular equipment covered. EN 45510-2-8:2004 - 6 - 1 Scope This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and med

34、ium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the prep

35、aration of this Guide. This Guide covers power cables only for voltages up to and including U m = 41,5 kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems. For guidance on the technical specification of cables, including

36、 their installation and termination, refer to EN 45510-2-6 The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be

37、supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems; predicted performance is achieved; ancillary equipment is properly sized; reliability, availability and

38、safety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided

39、on the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate parts of an enquiry; any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents

40、in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated r

41、eferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. European Standards EN ISO 9001 Quality management systems - Requirements EN 50265 Common test methods for cables under fire conditions. Test for resist

42、ance to vertical flame propagation for a single-insulted conductor or cable Part 1: Apparatus Part 2-1: Procedures - 1kW pre-mixed flame Part 2-2: Procedures - Diffusion flame EN 50266 Common test methods for cables under fire conditions. Tests for vertical flame spread of vertically-mounted bunched

43、 wire or cables Part 1: Apparatus Part 2: Procedures - 7 - EN 45510-2-8:2004 EN 50268 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Part 1: Apparatus Part 2: Procedure International standards IEC 60050 (191) Internationa

44、l electrotechnical vocabulary Chapter 191: Dependability and Quality of Services IEC 60050 (461) International electrotechnical vocabulary Chapter 461: Electric cables. IEC 60183 Guide to the selection of high-voltage cables. 3 Definitions For the purposes of this Guide, the following definitions ap

45、ply: 3.1 Organisational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier. 3.1.2 supplier person or organisation that provides a product and/or a service to the purchaser. 3.1.3 specification document stating technical requirements of the purchaser. It may form par

46、t of an enquiry issued by a purchaser. 3.1.4 enquiry invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and commercial conditions. 3.1.5 tender offer made by a tenderer in response to an enquiry. 3.1.6 tenderer person or organ

47、isation submitting a tender for the equipment in response to the enquiry. 3.1.7 site place to which the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the purchaser, use for the purposes

48、 of the contract. NOTE Further definitions of useful organisational terms may be found in EN ISO 8402 (see Annex A). EN 45510-2-8:2004 - 8 - 3.2 Technical terms Most technical terms applicable to the design, description, construction and performance of cables are defined in IEC 60050 International E

49、lectrotechnical Vocabulary, Chapter 461 or the normative references given in Clause 2. The specification should define any additional technical terms not included in IEC 60050 (461) or the normative references. For reasons of simplification, the general term cables is used in this guide for those power cables, flexible cables and insulated wires intended to transmit electrical energy. 3.3 General terms 3.3.1 equipment plant, component, system and/or associated service to be