BS EN 419212-3-2017 Application Interface for Secure Elements for Electronic Identification Authentication and Trusted Services Device authentication protocols《用于电子识别、认证和可信服务的安全元件的.pdf

《BS EN 419212-3-2017 Application Interface for Secure Elements for Electronic Identification Authentication and Trusted Services Device authentication protocols《用于电子识别、认证和可信服务的安全元件的.pdf》由会员分享，可在线阅读，更多相关《BS EN 419212-3-2017 Application Interface for Secure Elements for Electronic Identification Authentication and Trusted Services Device authentication protocols《用于电子识别、认证和可信服务的安全元件的.pdf（122页珍藏版）》请在麦多课文档分享上搜索。

1、Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted ServicesPart 3: Device authentication protocolsBS EN 419212-3:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

2、419212-3 September 2017 ICS 35.240.15 Supersedes EN 419212-1:2014, EN 419212-2:2014English Version Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 3: Device authentication protocols Interface applicative des lments scuriss utiliss c

3、omme dispositifs de cration de signature lectronique qualifie (cachet) Partie 3: Protocoles dauthentification des dispositifs Anwendungsschnittstelle fr Smartcards als sichere Signaturerstellungseinheiten - Teil 3: Gerteauthentisierungsprotokolle This European Standard was approved by CEN on 17 Marc

4、h 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai

5、ned on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN

6、-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

7、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management

8、 Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 419212-3:2017 ENational forewordThis British Standard is the UK implementation of EN 419212-3:2017. Together with BS EN 419212-1:2017,

9、BS EN 419212-2, BS EN 419212-4, and BS EN 419212-5, it supersedes BS EN 419212-1:2014 and BS EN 419212-2:2014, which will be withdrawn upon publication of the rest of the series.The UK participation in its preparation was entrusted to Technical Committee IST/17, Cards and personal identification.A l

10、ist of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards

11、 Limited 2017ISBN 978 0 580 95789 5ICS 35.240.15Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationD

12、ate Text affectedBRITISH STANDARDBS EN 419212-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 419212-3 September 2017 ICS 35.240.15 Supersedes EN 419212-1:2014, EN 419212-2:2014English Version Application Interface for Secure Elements for Electronic Identification, Authentication and Trus

13、ted Services - Part 3: Device authentication protocols Interface applicative des lments scuriss utiliss comme dispositifs de cration de signature lectronique qualifie (cachet) Partie 3: Protocoles dauthentification des dispositifs Anwendungsschnittstelle fr Smartcards als sichere Signaturerstellungs

14、einheiten - Teil 3: Gerteauthentisierungsprotokolle This European Standard was approved by CEN on 17 March 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al

15、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language m

16、ade by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Est

17、onia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE

18、 FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 419212-3:2017 EBS EN 419212-3:

19、2017EN 419212-3:2017 (E) 2 Contents European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Device authentication 7 3.1 General 7 3.2 Asymmetric Authentication introduction 9 3.3 Certification authorities and certificates . 9 3.3.1 Certificate chains . 9 3.3.2 Usage of link certifi

20、cates 10 3.4 Authentication environments . 10 3.4.1 SCA in trusted environment . 11 3.4.2 SCA in untrusted environment 11 3.4.3 Specification of the environment . 11 3.4.4 Display message mechanism . 11 3.4.5 Additional authentication environments 12 3.5 Key transport and key agreement mechanisms .

21、12 3.6 Device authentication with privacy protection . 12 3.6.1 General . 12 3.6.2 Authentication steps . 13 3.7 Privacy constrained Modular EAC (mEAC) protocol with non-traceability feature 31 3.7.1 General . 31 3.7.2 Example for traceability case . 31 3.7.3 Notation . 32 3.7.4 Authentication steps

22、 . 32 3.7.5 Unlinkablity Mechanism with individual private keys 45 3.8 Symmetric authentication scheme 54 3.8.1 General . 54 3.8.2 Authentication steps . 54 3.8.3 Session Key creation . 58 3.9 Key transport protocol based on RSA . 58 3.9.1 General . 58 3.9.2 Authentication Steps . 60 3.9.3 Session K

23、ey creation . 68 3.10 Compute Session keys from key seed KIFD/ICC. 68 3.10.1 General . 68 3.10.2 Generation of key data . 69 3.10.3 Partitioning of the key data 69 3.10.4 Algorithm and method specific definition for key derivation . 69 3.10.5 Key derivation from passwords 72 3.11 Compute send sequen

24、ce counter SSC 73 3.12 Post-authentication phase 73 3.13 Ending the secure session . 74 3.13.1 General . 74 3.13.2 Example for ending a secure session 74 3.13.3 Rules for ending a secure session 74 BS EN 419212-3:2017EN 419212-3:2017 (E) 3 3.14 Reading the Display Message . 75 3.15 Updating the Disp

25、lay Message . 77 4 Data structures 78 4.1 General . 78 4.2 CRTs . 78 4.2.1 General . 78 4.2.2 CRT AT for the selection of internal private authentication keys . 78 4.2.3 CRT AT for selection of internal authentication keys 78 4.2.4 CRT for selection of IFDs PuK.CAIFD.CS_AUT . 79 4.2.5 CRT for select

26、ion of IFDs PuK.IFD.AUT 79 4.2.6 CRT AT for selection of the public DH / ECDH key parameters . 80 4.2.7 GENERAL AUTHENTICATE DH key parameters used by the Privacy Protocol . 80 4.2.8 CRT AT for selection of ICCs private authentication key . 80 4.2.9 CRT for selection of IFDs PuK.IFD.AUT 81 4.2.10 CR

27、T for selection of PrK.ICC.KA . 81 4.3 Key transport device authentication protocol . 82 4.3.1 EXTERNAL AUTHENTICATE 82 4.3.2 INTERNAL AUTHENTICATE . 82 4.4 Privacy device authentication protocol 83 4.4.1 EXTERNAL AUTHENTICATE (DH case) 83 4.4.2 EXTERNAL AUTHENTICATE (ECDH case) . 84 4.4.3 INTERNAL

28、AUTHENTICATE (DH case) . 85 4.4.4 INTERNAL AUTHENTICATE (ECDH case) 85 5 CV_Certificates and Key Management . 86 5.1 General . 86 5.2 Level of trust in a certificate . 86 5.3 Key Management . 86 5.4 Certificate types 87 5.4.1 Card Verifiable Certificates . 87 5.4.2 Signature-Certificates . 88 5.4.3

29、Authentication Certificates . 88 5.5 Use of the public key extracted from a CV-certificate 88 5.6 Validity of the key extracted from a CV-certificate . 88 5.7 Structure of CVC. 89 5.7.1 General . 89 5.7.2 Non-self-descriptive certificates . 89 5.7.3 Self-descriptive certificates 90 5.8 Certificate C

30、ontent 90 5.8.1 General . 90 CPI-Certificate Profile Identifier 91 5.8.2 CAR-Certification Authority Reference DO 92 5.8.3 CHR-Certificate Holder Reference DO . 93 5.8.4 CHA-Certificate Holder Authorization Data Object (CHA-DO) 94 5.8.5 Role identifier specifications 95 5.8.6 User and service provid

31、er authentication . 97 5.8.7 CHAT-Certificate Holder Authorization Template (CHAT) 98 5.8.8 OID Object identifier 98 5.8.9 CEDT Certificate Effective Date Template 98 5.8.10 CXDT Certificate Expiration date Template . 98 5.9 Certificate signature 99 5.9.1 General . 99 5.9.2 Non self-descriptive cert

32、ificates 99 5.9.3 Self-descriptive certificates . 100 BS EN 419212-3:2017EN 419212-3:2017 (E) 4 5.10 Coding of the certificate content . 101 5.10.1 Non self-descriptive certificates . 101 5.10.2 Self-descriptive certificates 101 5.10.3 Self-descriptive certificates for elliptic curve cryptography 10

33、2 5.11 Steps of CVC verification 105 5.11.1 General . 105 5.11.2 First round: CVC verification from a Root PuK 106 5.11.3 Subsequent round(s) 107 5.12 Commands to handle the CVC 107 5.13 C_CV.IFD.AUT (non self-descriptive) . 107 5.14 C_CV.CA.CS-AUT (non self-descriptive) . 108 5.15 C.ICC.AUT . 109 5

34、.16 Self-descriptive CV Certificate (Example) . 110 5.16.1 General . 110 5.16.2 Public Key . 110 5.16.3 Certificate Holder Authorization Template 111 5.16.4 Certificate Extension . 111 5.16.5 ECDSA Signature . 112 Annex A (informative) Device authentication Protocol Properties 113 Bibliography . 115

35、 BS EN 419212-3:2017EN 419212-3:2017 (E) 5 European foreword This document (EN 419212-3:2017) has been prepared by CEN/TC 224 “Personal identification, electronic signature and cards and their related systems and operations”, the secretariat of which is held by AFNOR. This European Standard shall be

36、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. This document supersedes EN 419212-1:2014 and EN 419212-2:2014. This document has be

37、en prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. This standard supports services in the context of electronic IDentification, Authentication and Trust Services (eIDAS) including signatures. In EN 419212 Part 2, the standard allows suppo

38、rt of implementations of the European legal framework for electronic signatures, defining the functional and security features for a Secure Elements (SE) (e.g. smart cards) intended to be used as a Qualified electronic Signature Creation Device (QSCD) according to the Terms of the “European Regulati

39、on on Electronic Identification and Trust Services for electronic transactions in the internal market” 1. A Secure Element (SE) compliant to the standard will be able to produce a “qualified electronic signature” that fulfils the requirements of Article of the Electronic Signature Regulation 1 and t

40、herefore can be considered equivalent to a hand-written signature. This standard consists of five parts: Part 1: “Introduction and common definitions” describes the history, application context, market perspective and a tutorial about the basic understanding of electronic signatures. It also provide

41、s common terms and references valid for the entire 419212 series. 24 Part 2: “Signature and Seal Services” describes the specifications for signature generation according to the eIDAS regulation. 25 Part 3: “Device Authentication” describes the device authentication protocols and the related key man

42、agement services to establish a secure channel. 26 Part 4: “Privacy specific Protocols” describes functions and services to provide privacy to identification services. 27 Part 5: “Trusted eServices” describes services that may be used in conjunction with signature services described in Part 2. 28 Ac

43、cording to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

44、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 419212-3:2017EN 419212-3:2017 (E) 6 Introduction The European Committee for

45、 Standardization (CEN) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the mapping function given in 25 8.2.5 “Step 4.2 - Map nonce and compute generator point for integrated mapping”. The patent relates to “Sagem, MorphoMa

46、pping Patents FR09-54043 and FR09-54053, 2009”. CEN takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has ensured CEN that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms

47、and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with CEN. Information may be obtained from: Morpho 11, boulevard Gallini 92445 Issy-les-Moulineaux Cedex Attention is drawn to the possibility that some of the element

48、s of this document may be the subject of patent rights other than those identified above. CEN shall not be held responsible for identifying any or all such patent rights. BS EN 419212-3:2017EN 419212-3:2017 (E) 7 1 Scope This part specifies device authentication to be used for QSCDs in various conte

49、xts including: Device authentication protocols; Establishment of a secure channel; Data structures; CV-certificates; Key management. The device authentication protocols should apply to sole-control signature mandated by the EU-regulation eIDAS 1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do