BS EN 16341-2012 Selection of standards and standard-like documents for defence products and services Order of preference《防卫产品和设备用标准和类似标准文档的选择 参考顺序》.pdf

《BS EN 16341-2012 Selection of standards and standard-like documents for defence products and services Order of preference《防卫产品和设备用标准和类似标准文档的选择 参考顺序》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16341-2012 Selection of standards and standard-like documents for defence products and services Order of preference《防卫产品和设备用标准和类似标准文档的选择 参考顺序》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16341:2012Selection of standards andstandard-like documents fordefence products and services Order of preferenceCopyright European Committee for Standardization Provided by

2、 IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16341:2012.The UK participation in its preparation was entrusted to TechnicalCommittee

3、DEF/1, Defence standardization.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution

4、2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 71993 6 ICS 95.020 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued si

5、nce publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16341 March 2012 ICS 95.020

6、English Version Selection of standards and standard-like documents for defence products and services - Order of preference Slection de normes et de documents normatifs destins aux produits et services de la Dfense - Ordre de prfrence Auswahl von Normen und anderen normartigen Dokumenten fr wehrtechn

7、ische Produkte und Dienstleistungen - Rangfolge This European Standard was approved by CEN on 11 February 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt

8、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma

9、de by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

10、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISAT

11、ION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16341:2012: ECopyright European Committee for Standardization Provided by IHS under licens

12、e with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:2012EN 16341:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Order of preference .54.1 General 54.2 Edition .54.3 Preferences 54.4 C

13、ontract changes.65 Disclaimer .7Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:2012EN 16341:2012 (E) 3 Foreword This document (EN 16341:2012) has been prepared by th

14、e CEN/CENELEC Stakeholder Forum for Defence Procurement Standardization. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at th

15、e latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the nat

16、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

17、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:20

18、12EN 16341:2012 (E) 4 Introduction This document describes the order of preference when applying standards and standard-like documents for defence products and services and considers the selection requirements of the Directive 2009/81/EC. Copyright European Committee for Standardization Provided by

19、IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16341:2012EN 16341:2012 (E) 5 1 Scope This European Standard applies to the provision, development, use, improvement and disposal of defence products and services in accordance with Cha

20、pter II of Directive 2009/81/EC. It also applies to measures intended to maintain the operational readiness of products. This document supports project managers in the selection and use of applicable standards and standard-like documents. 2 Normative references The following documents, in whole or i

21、n part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Directive 2009/81/EC of the European Parliame

22、nt and of the Council of 13 July 2009 on the coordination of procedures for the award of certain works contracts, supply contracts and service contracts by contracting authorities or entities in the fields of defence and security, and amending Directives 2004/17/EC and 2004/18/EC ISO/IEC Guide 2:200

23、4, Standardization and related activities General vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in Directive 2009/81/EC and ISO/IEC Guide 2:2004 apply. 4 Order of preference 4.1 General The standards and standard-like documents applicable to co

24、ntracts shall be identified by the Purchaser or agreed on proposal by contracting parties. Among them, the non-application of a standard requires the Purchasers written approval. 4.2 Edition For the execution of contractually agreed work the edition of the standard specified in the contract shall ap

25、ply. If difficulties occur in the execution of a contract due to the fact that a new edition is issued during contract duration, it is at the discretion of the contracting parties to apply the new edition. 4.3 Preferences If, for the specification of the capability of a defence product or a service,

26、 standards or standard-like documents of different domains or origin are available and deemed suitable by the Purchasing Authority, they shall be selected and used in the following order of preference: a) Standards and other standard-like documents, which are referenced in laws, ordinances and statu

27、tory provisions; b) International Military Alliances Standards (e.g. NATO Allied Publications and associated Standardization Agreements (STANAG); NOTE For NATO nations this applies if the standards are ratified (without reservations) with the intention of implementation for e.g. achieving the requir

28、ed interoperability between forces. c) National civil standards, transposing European standards (e.g. BS EN, NF EN, DIN EN,); Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS E

29、N 16341:2012EN 16341:2012 (E) 6 d) European Technical Approvals (ETA); NOTE Mainly in the construction sector. e) Common European Technical Specifications; f) National civil standards, transposing international standards (e.g. BS ISO,); g) other international civil standards; h) other technical refe

30、rence systems established by the recognized European standardization bodies. If for the present application no suitable standards or standard-like documents according to a) to h) are available, appropriate standards or standard like documents shall be chosen in accordance with the following order of

31、 preference: i) other national civil standards and standard-like documents (e.g. BS); j) National Technical Approvals or Technical Specifications (e.g. DIN-SPEC); k) widely recognized civil technical specifications stemming from industry. If the necessary requirements cannot be met by the applicatio

32、n of the aforementioned standards or standard-like documents, appropriate defence standards or standard like documents shall be chosen among others from the following technical reference systems: l) National Defence Materiel Standards (e.g. UK Defence Standards, German VG); m) Mandatory national reg

33、ulations and directives relating to specific equipment (e.g. aircraft or naval ships); n) National Technical Specifications issued by governmental defence procurement authorities; o) Military standards of partner nations, such as MIL Standards (USA); p) Company standards may be chosen, in cases wher

34、e the requirements cannot be covered by the documents previously mentioned; where the application of company standards is envisaged, the Contractor shall ensure that these standards are made available to the Purchaser together with the related rights of use. Each reference in tendering documents sha

35、ll be followed by the expression “or equivalent“ as stated in Directive 2009/81/EC. EDSTAR shall be considered during the standards selection process as it contains recommended Best Practice Standards for the acquisition of defence materiel. NOTE EDSTAR is the former “European Handbook for Defence P

36、rocurement (EHDP)“. See under: www.eda.europa.eu/EDSTAR 4.4 Contract changes Issues may arise during the execution of a contract which necessitate a change in the list of standards and standard-like documents or make a change appear reasonable; such changes being driven by: a) new experience gained

37、during contract execution; b) standards lower in the selection order being referred to in laws, ordinances and statutory provisions; Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,

38、-,-BS EN 16341:2012EN 16341:2012 (E) 7 c) standards lower in the selection order appearing to be more suitable from a technical point of view; d) the application of standards lower in the selection order being more economical; e) other orders of preference being defined in bilateral or multilateral

39、projects. Where the initiative to change the list of standards and standard-like documents is taken by the Contractor, the Purchasers prior consent shall be obtained; and the change shall be laid down in a contract amendment. 5 Disclaimer The editor of standards and standard-like documents makes no

40、warranty that the subject of standardization is free of protective right or copyright claims; the standardization does not grant permission to exploit such rights. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permi

41、tted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee f

42、or Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents

43、 the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL

44、UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and service

45、s. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 899

46、6 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF

47、and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for i

48、nternational standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standa