BS EN 16337-2013 Hardware for furniture Strength and loading capacity of shelf supports《家具五金件 架托的强度及载荷能力》.pdf
《BS EN 16337-2013 Hardware for furniture Strength and loading capacity of shelf supports《家具五金件 架托的强度及载荷能力》.pdf》由会员分享,可在线阅读,更多相关《BS EN 16337-2013 Hardware for furniture Strength and loading capacity of shelf supports《家具五金件 架托的强度及载荷能力》.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16337:2013Hardware for furniture Strength and loading capacityof shelf supportsBS EN 16337:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementat
2、ion of EN 16337:2013.The UK participation in its preparation was entrusted to TechnicalCommittee FW/0/1, Common Test Methods for Furniture.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessarypr
3、ovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 76409 7ICS 97.140Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published
4、under the authority of theStandards Policy and Strategy Committee on 30 June 2013.Amendments issued since publicationDate Text affectedBS EN 16337:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16337 June 2013 ICS 97.140 English Version Hardware for furniture - Strength and loading capacit
5、y of shelf supports Quincaillerie dameublement - Rsistance mcanique et capacit de charge des supports dtagre Mbelbeschlge - Festigkeit und Tragfhigkeit von Bodentrgern This European Standard was approved by CEN on 1 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations
6、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This
7、 European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN membe
8、rs are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
9、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any
10、means reserved worldwide for CEN national Members. Ref. No. EN 16337:2013: EBS EN 16337:2013EN 16337:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 General test condition .5 4.1 Preliminary preparation 5 4.2 Test equipment 5 4.2.1 Test wall 5 4.2.
11、2 Particle board properties 5 4.2.3 Melamine faced particleboard 6 4.2.4 Steel impact plates 6 4.2.5 Masses 6 4.3 Tolerances (allowed variation from the nominal values).6 5 Test set-up 6 6 Test procedures and requirements 7 6.1 General 7 6.2 Strength requirements and tests .8 6.3 Verification of loa
12、ding capacity 8 6.3.1 General 8 6.3.2 Impact test 8 6.3.3 Sustained load test . 10 6.4 Corrosion resistance 10 7 Test report . 10 Annex A (normative) Requirements for product information 11 A.1 General . 11 A.2 Field of application . 11 A.3 Loading capacity, M 11 A.4 Adjustment systems . 11 A.5 Corr
13、osion test . 11 A.6 Mounting instructions 11 Annex B (normative) Test parameters for impact plates (4.2.4) 12 Annex C (informative) Determination of loading capacity . 13 C.1 Determination of breaking load . 13 C.2 Calculation of loading capacity, M 13 Bibliography . 14 BS EN 16337:2013EN 16337:2013
14、 (E) 3 Foreword This document (EN 16337:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
15、 by December 2013, and conflicting national standards shall be withdrawn at the latest by December 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s
16、uch patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mac
17、edonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16337:2013EN 16337:2013 (E) 4 1 Scope This European Standard s
18、pecifies test methods for the verification of the loading capacity of shelf supports. This standard does not apply to ceiling attached shelf support systems. The tests consist of the application of vertical loads and forces simulating normal functional use, as well as misuse that might reasonably be
19、 expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength tests include only the shelf supports and their components as well as the attachment to the cab
20、inet and/or to the wall. If the shelf support has additional functions, e.g. as a connector or as an extension element, these are not covered by this standard. The test results are only valid for the shelf supports tested. The results may be used to represent the performance of production models pro
21、vided that the tested model is representative of the production model. The test results can only be used as a guide to the performance of the shelf supports. With the exception of the corrosion test, ageing and influences of temperature and humidity are not included. Annex A (normative) includes req
22、uirements for product information. Annex B (normative) includes test parameters. Annex C (informative) includes method for the determination of loading capacity. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for
23、 its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 320, Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws EN 323, Wood-based pane
24、ls - Determination of density EN 14322, Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification EN ISO 6270-2, Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmosp
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN163372013HARDWAREFORFURNITURESTRENGTHANDLOADINGCAPACITYOFSHELFSUPPORTS 家具 五金件 强度 载荷 能力 PDF
链接地址:http://www.mydoc123.com/p-573817.html