BS EN 16249-2013 Tanks for the transport of dangerous goods Service equipment Cap for the adaptor for bottom loading and unloading《危险货物运输油罐 服务设备 底荷和非荷载用接合器盖》.pdf

《BS EN 16249-2013 Tanks for the transport of dangerous goods Service equipment Cap for the adaptor for bottom loading and unloading《危险货物运输油罐 服务设备 底荷和非荷载用接合器盖》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16249-2013 Tanks for the transport of dangerous goods Service equipment Cap for the adaptor for bottom loading and unloading《危险货物运输油罐 服务设备 底荷和非荷载用接合器盖》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16249:2013Tanks for the transport ofdangerous goods Serviceequipment Cap for theadaptor for bottom loadingand unloadingBS EN 16249:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16249:2013.The UK participation in its preparat

2、ion was entrusted to TechnicalCommittee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible fo

3、r its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 70003 3ICS 23.020.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy an

4、d Strategy Committee on 31 August 2013.Amendments issued since publicationDate Text affectedBS EN 16249:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16249 August 2013 ICS 23.020.20 English Version Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bo

5、ttom loading and unloading Citernes destines au transport de matires dangereuses -Equipement de service - Chapeau pour ladapteur pour le chargement et dchargement par le bas Tanks fr die Befrderung gefhrlicher Gter - Bedienungsausrstung - Kappe fr VK-Kupplung fr Untenbefllung und -entladung This Eur

6、opean Standard was approved by CEN on 29 June 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

7、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member i

8、nto its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

9、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMIT

10、EE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16249:2013: EBS EN 16249:2013EN 16249:2013 (E) 2 Contents Page Foreword . 3 Introduction 5 1 Scope 6 2 Normativ

11、e references . 6 3 Terms and definitions 6 4 Functions 6 5 Design characteristics . 7 5.1 General . 7 5.2 Pressure rating . 7 5.3 Dimensions. 7 5.4 Mounting . 7 5.5 Temperature range . 7 5.6 Materials of construction . 7 5.7 Electrical resistance . 7 5.8 Attachment . 7 6 Tests . 8 6.1 General . 8 6.

12、2 Production tests . 8 6.3 Type tests . 8 7 Marking . 9 8 Installation, operating and maintenance recommendations 9 BS EN 16249:2013EN 16249:2013 (E) 3 Foreword This document (EN 16249:2013) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat

13、 of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014. Attention is drawn

14、to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European

15、Free Trade Association. This European Standard forms part of a coherent standards programme about service equipment of tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolute pressure) at 50 C and of petrol. That programme comprises the following European S

16、tandards: EN 13081, Tanks for transport of dangerous goods Service equipment for tanks Vapour collection adaptor and coupler; EN 13082, Tanks for transport of dangerous goods Service equipment for tanks Vapour transfer valve; EN 13083, Tanks for transport of dangerous goods Service equipment for tan

17、ks Adaptor for bottom loading and unloading; EN 13308, Tanks for transport of dangerous goods Service equipment for tanks Non pressure balanced footvalve; EN 13314, Tanks for transport of dangerous goods Service equipment for tanks Fill hole cover; EN 13315, Tanks for transport of dangerous goods Se

18、rvice equipment for tanks Gravity discharge coupler; EN 13316, Tanks for transport of dangerous goods Service equipment for tanks Pressure balanced footvalve; EN 13317, Tanks for transport of dangerous goods Service equipment for tanks Manhole cover assembly; EN 14595, Tanks for transport of dangero

19、us goods Service equipment for tanks Pressure and Vacuum Breather Vent; EN 14596, Tanks for transport of dangerous goods Service equipment for tanks Emergency pressure relief valve; EN 16257, Tanks for the transport of dangerous goods Service equipment Footvalve sizes other than 100 mm dia (nom). Ac

20、cording to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

21、ny, Greece, BS EN 16249:2013EN 16249:2013 (E) 4 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16249:2013EN 16249:2013 (E) 5 Introduction The

22、cap for the adaptor for bottom loading and unloading, the subject of this European Standard, is the third closure device providing additional confinement of the dangerous substances within the tank when fitted. Additionally, when fitted, it provides mechanical protection for the sealing face of the

23、adaptor nose. BS EN 16249:2013EN 16249:2013 (E) 6 1 Scope This European Standard is applicable to the cap used to provide protection and end closing for the adaptor for bottom loading and unloading of tanks for the transport of dangerous goods. It specifies the performance requirements, critical dim

24、ensions and tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 1)(flammable liquids) that have a vapour pressure n

25、ot exceeding 110 kPa at 50 C, including petrol, and that are not sub-classified as toxic or corrosive. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci

26、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2012, Industrial valves Testing of metallic valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2012, Industrial valv

27、es Testing of metallic valves Part 2: Tests, test procedures and acceptance criteria Supplementary requirements EN 13083:2008, Tanks for transport of dangerous goods Service equipment for tanks Adaptor for bottom loading and unloading EN 13315:2002, Tanks for transport of dangerous goods Service equ

28、ipment for tanks Gravity discharge coupler EN 14564:2013, Tanks for transport of dangerous goods Terminology ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purpo

29、ses of this document, the terms and definitions given in EN 13083:2008, EN 13315:2002 and EN 14564:2013 apply. 4 Functions When fitted, the requirements for the cap for the adaptor shall provide containment of substance within the tank, mechanical protection for the sealing face of the adaptor nose,

30、 and 1) ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road BS EN 16249:2013EN 16249:2013 (E) 7 a method of removal which ensures complete and safe release of pressure behind the cap before the cap is completely removed. 5 Design characteristics 5.1 General The c

31、ap for the adaptor shall comply with the minimum requirements specified in 5.2 to 5.8. 5.2 Pressure rating The cap shall be designed for a working pressure of at least 40 kPa. 5.3 Dimensions The requirements shall be in accordance with EN 13315:2002, 5.5. 5.4 Mounting The requirements shall be in ac

32、cordance with EN 13315:2002, 5.1.1 and 5.1.2. 5.5 Temperature range The requirements shall be in accordance with EN 13315:2002, 5.4. 5.6 Materials of construction The requirements shall be in accordance with EN 13315:2002, 5.3. Additionally, movable parts such as covers, closures, etc. that are liab

33、le to come into frictional or percussive contact with aluminium parts of the tank vehicle shall not be made of unprotected corrodible steel. Whenever possible, selected materials shall be recyclable and sustainable. 5.7 Electrical resistance The electrical resistance between any conductive part of t

34、he coupler coming into contact with the dangerous substances and the main body of the coupler shall not exceed 106. 5.8 Attachment The cap shall incorporate a method of attachment to its associated adaptor that shall enable the cap to be attached to and/or removed from the adaptor without interferin

35、g with the connection of the adaptor to loading or unloading devices. The cap shall be capable of being secured against any unintended opening. The attachment device shall conform to the electrical resistance requirements specified in 5.7. BS EN 16249:2013EN 16249:2013 (E) 8 6 Tests 6.1 General Two

36、classes of tests are required: production tests and type tests. Testing methods and procedures shall comply with the requirements of EN 12266-1 and EN 12266-2, except as specified or amended within this European Standard. 6.2 Production tests 6.2.1 General Production tests shall comprise tightness t

37、est (see EN 12266-1:2012, A.4) and operability test (see EN 12266-2:2012, B.1). The number, frequency and sampling methods of production test samples shall not be less than those specified within ISO 2859-1, (AQL of 2,5). 6.2.2 Tightness test 6.2.2.1 Test pressure: 40 kPa. 6.2.2.2 Test duration: See

38、 EN 12266-1:2012, A.2. 6.2.2.3 Acceptance criteria: See EN 12266-1:2012, A.3.3. 6.2.3 Operability test 6.2.3.1 Test scope: To confirm the ability of the cap for the adaptor to clamp and un-clamp to the adaptor nose according to the minimum tolerances of Figure 1. 6.2.3.2 Test method: See EN 12266-2:

39、2012, B.1. 6.2.4 Test results The test results shall be recorded and maintained in accordance with the manufacturers procedures. 6.3 Type tests 6.3.1 General A minimum of two production samples of each model type shall be type tested to demonstrate the performance and mechanical strength of the desi

40、gn. NOTE Devices having one design, size and set pressure are considered to be of one model type. Unless otherwise noted, all type tests shall be performed at maximum and minimum design temperatures. Type tests shall comprise tightness test (see EN 12266-1:2012, A.4) and BS EN 16249:2013EN 16249:201

41、3 (E) 9 operability test (see EN 12266-2:2012, B.1). 6.3.2 Tightness test The tightness test shall be performed in accordance with the requirements of the production test. The test shall be carried out only under ambient conditions. 6.3.3 Operability test The operability test shall be performed in a

42、ccordance with the requirements of the production test. 6.3.4 Test results Test results shall be recorded and maintained for a time period not be less than the manufactured life of the product. 7 Marking The cap shall have a permanent identification marking including the following: reference to this

43、 European Standard; manufacturers name and/or logo; manufacturers type or assembly number; serial number and/or date of manufacture and/or batch number; any special operating conditions. 8 Installation, operating and maintenance recommendations Installation, operation and maintenance instructions sh

44、all be provided for the equipment. Additional dimensions shall be in accordance with EN 13083:2008, Annex A. BS EN 16249:2013EN 16249:2013 (E) 10 Dimensions in millimetres Figure 1 Test adaptor nose This page deliberately left blankBSI is the national body responsible for preparing British Standards

45、 and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout

46、usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation

47、process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Cust

48、omer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from

49、other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and internatio