BS EN 16232-2013 Child use and care articles Infant swings《儿童使用和保育用品 婴儿秋千》.pdf

《BS EN 16232-2013 Child use and care articles Infant swings《儿童使用和保育用品 婴儿秋千》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16232-2013 Child use and care articles Infant swings《儿童使用和保育用品 婴儿秋千》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16232:2013Child use and care articles Infant swingsBS EN 16232:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16232:2013.The UK participation in its preparation was entrusted to TechnicalCommittee CW/1/1, Seating.A list of or

2、ganizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 201

3、3ISBN 978 0 580 73579 0ICS 97.190Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2013.Amendments issued since publicationDate Text affectedBS EN 16232:20

4、13EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16232 August 2013 ICS 97.190 English Version Child use and care articles - Infant swings Articles de puriculture - Balancelles suspendues pour enfant Artikel fr Suglinge und Kleinkinder - Babyschaukeln This European Standard was approved by CEN

5、on 5 July 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

6、be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

7、 the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

8、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Ave

9、nue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16232:2013: EBS EN 16232:2013EN 16232:2013 (E) 2 Contents Page Foreword 4 1 Scope . 5 2 Normative references 5 3 Terms and definitions . 5 4 Test e

10、quipment 5 4.1 Articulated test mass 5 4.2 Test mass A . 6 4.3 Test mass B . 7 4.4 Small parts cylinder 7 4.5 Feeler gauge 8 4.6 Test probes for finger entrapment 8 4.7 Test surface for static slippage 9 4.8 Test surface for stability . 9 4.9 Test equipment for sound level measurement 9 5 General re

11、quirements and test conditions . 9 5.1 Product conditioning 9 5.2 Test conditions 9 5.3 Application of forces . 10 5.4 Tolerances . 10 5.5 Order of tests. 10 6 Chemical hazards migration of certain elements . 10 7 Thermal hazards 11 8 Mechanical hazards 11 8.1 General 11 8.1.1 Determination of the j

12、unction line 11 8.1.2 Determination of protected volume 12 8.2 Hazards due to sound level 14 8.2.1 Requirement 14 8.2.2 Test method . 14 8.3 Entrapment hazards 14 8.3.1 Entrapment of fingers . 14 8.4 Hazards due to falling of the child 15 8.4.1 Angles 15 8.4.2 Restraint system . 21 8.5 Hazards due t

13、o moving parts 22 8.5.1 Requirements for compression points . 22 8.5.2 Requirements for shear points . 22 8.6 Hazards due to folding of the product 22 8.6.1 Requirements 22 8.6.2 Test methods . 23 8.7 Hazards from entanglement in cords, ribbons and similar parts 23 8.7.1 Requirements 23 8.7.2 Test m

14、ethod . 23 8.8 Choking and ingestion hazard 23 8.8.1 Requirements 23 8.8.2 Test methods . 24 8.9 Suffocation hazards from packaging materials . 25 8.10 Hazards from edges, corners and protruding parts 25 BS EN 16232:2013EN 16232:2013 (E) 3 8.11 Hazards from inadequate structural integrity 25 8.11.1

15、Static strength . 25 8.11.2 Durability of powered swinging mechanisms 25 8.11.3 Reclining system . 26 8.12 Hazards from inadequate stability 26 8.12.1 Requirements 26 8.12.2 Test method for static stability . 26 8.12.3 Test method for dynamic stability 27 8.13 Hazards from possible movement of the i

16、nfant swing on the floor 27 8.13.1 Requirement 27 8.13.2 Test method . 27 8.14 Electrical hazards 28 8.14.1 General 28 8.14.2 Leakage prevention . 28 8.14.3 Test methods . 28 9 Product information 29 9.1 General 29 9.2 Marking of the product 29 9.2.1 General requirements . 29 9.2.2 Requirements for

17、infant swings with electrical components 30 9.2.3 Durability of marking . 30 9.2.4 Test method for durability of marking 30 9.3 Purchase information 30 9.4 Instructions for use . 31 9.4.1 General 31 9.4.2 Warnings 31 9.4.3 Additional information 31 9.4.4 Requirements for infant swings with electrica

18、l components 32 Annex A (informative) Rationales 33 A.1 General (see Clause 1) 33 A.2 Protective volume and protective barriers (see 8.1.2 and 8.1.2.2) 33 A.3 Hazards due to sound level (see 8.2) 33 A.4 Hazards due to detachment of toy bars . 33 A.5 Hazards from possible movement of the infant swing

19、 on the floor (see 8.13) . 33 Annex B (informative) A-deviation . 34 Bibliography . 35 BS EN 16232:2013EN 16232:2013 (E) 4 Foreword This document (EN 16232:2013) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This Europea

20、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014. Attention is drawn to the possibility that some of the elem

21、ents of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eu

22、ropean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, S

23、lovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16232:2013EN 16232:2013 (E) 5 1 Scope This European Standard specifies safety requirements and the corresponding test methods for infant swings intended for children up to a weight of 9 kg or unable to sit up unaided. If an in

24、fant swing has several functions or can be converted into another function, the relevant European Standards apply to it. Swings falling under the scope of EN 71-8 are excluded from the scope of this European Standard. See rationale in A.1. 2 Normative references The following documents, in whole or

25、in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-3:1994, Safety of toys Part 3: Migrati

26、on of certain elements EN 1103 Textiles Fabrics for apparel Detailed procedure to determine the burning behaviour EN 61558-2-7, Safety of power transformers, power supplies, reactors and similar products Part 2-7: Particular requirements and tests for transformers and power supplies for toys (IEC 61

27、558-2-7) EN 61558-2-16, Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (IEC 61558-2-16) EN 61672-1, Electro

28、acoustics Sound level meters Part 1: Specifications (IEC 61672-1) EN 61672-2, Electroacoustics Sound level meters Part 2: Pattern evaluation tests (IEC 61672-2) EN 62115:2005, Electric toys Safety (IEC 62115:2003, modified + A1:2004) EN ISO 3746:2010, Acoustics Determination of sound power levels an

29、d sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 infant swing stationary unit with a fram

30、e and mechanism that enables a child unable to sit up unaided to be swung 3.2 junction line intersection of the seat and the backrest 4 Test equipment 4.1 Articulated test mass 9 kg articulated test mass made of steel (see Figure 1). BS EN 16232:2013EN 16232:2013 (E) 6 Dimensions in millimetres Key

31、1 part to be placed onto the seat surface 2 part to be placed onto the backrest surface 3 hinge pin made of steel E mass: (4 495 50) g F mass: (4 501 50) g G mass of hinge axle: (17 0,5) g, length: 79,5 mm Mass tolerance: (9 0,1) kg Dimensions tolerance: 2 mm All edges shall be chamfered. Figure 1 A

32、rticulated test mass 4.2 Test mass A Test mass A is a rigid cylinder (160 5) mm in diameter and (300 5) mm in height, having a mass of ( )0100 9,+kg and with its centre of gravity in the centre of the cylinder. All edges shall have a radius of (5 1) mm. BS EN 16232:2013EN 16232:2013 (E) 7 Two anchor

33、age points shall be provided. These shall be positioned (150 2,5) mm from the base and at 180 to each other around the circumference (see Figure 2). Dimensions in millimetres Key 1 radius: (5 1) mm 2 two anchorage points Figure 2 Test mass A 4.3 Test mass B Test mass B is a (150 30) mm by (200 30) m

34、m rectangular shaped sand bag with a mass of (3 0,1) kg. 4.4 Small parts cylinder Small parts cylinder for the assessment of small components, having dimensions in accordance with Figure 3. BS EN 16232:2013EN 16232:2013 (E) 8 Dimension in millimetres Figure 3 Small parts cylinder 4.5 Feeler gauge Ga

35、uge with a thickness of (0,4 0,02) mm and an insertion edge radius of (3 0,5) mm (see Figure 4). Dimensions in millimetres Figure 4 Feeler gauge 4.6 Test probes for finger entrapment Probes made from plastics or other hard, smooth material of diameters ( )01,0-7 mm and ( )1,0012+mm with a full hemis

36、pherical end that can be mounted on a force-measuring device, see Figure 5. Mesh probe made from plastics or other hard, smooth material as shown in Figure 6. BS EN 16232:2013EN 16232:2013 (E) 9 Dimensions in millimetres Key (dimensions in millimetres) Probe type 7mm probe 12mm probe Diameter A 01,0

37、-71,0012+Radius RB 3,5 0,2 6 0,2 1 line scribed around circumference showing depth of penetration Figure 5 Test probes with hemispherical end Figure 6 Test probe for mesh 4.7 Test surface for static slippage Rigid plane covered with uncoated tempered float glass with a smooth surface and thickness o

38、f (6 0,5) mm, inclined at angle of (12 + 0,5/0) to the horizontal. 4.8 Test surface for stability Test surface, inclined at (15 + 0,5/0) to the horizontal, covered with aluminium oxide paper of grade 80. 4.9 Test equipment for sound level measurement The instrumentation system, including the microph

39、one and cable, shall meet the requirements of a type 1 or type 2 instrument specified in EN 61672-1 and EN 61672-2. When measuring high peak emission sound pressure levels, the microphone and the entire instrumentation system shall have the capability of handling linear peak levels at least up to 12

40、5 dB. 5 General requirements and test conditions 5.1 Product conditioning Before testing, any fabrics used shall be cleaned or washed and dried twice in accordance with the manufacturers instructions. 5.2 Test conditions The tests shall be carried out in ambient conditions of (20 5) C. BS EN 16232:2

41、013EN 16232:2013 (E) 10 The tests are designed to be applied to infant swings that are fully assembled and ready for use in accordance with the manufacturers instructions. If the infant swing can be assembled or adjusted in different ways, the most onerous combinations shall be used for each test. I

42、f the infant swing has any battery-powered mechanism, it shall be tested using new non-rechargeable alkaline batteries; if the infant swing is supplied with its own rechargeable battery pack, it shall be tested with the battery pack fully charged in accordance with the instructions for use. The batt

43、eries used are those with the voltage and size specified on the infant swing or in the instructions. Lithium batteries or rechargeable batteries shall not be used unless their use is recommended in the instructions. If the infant swing fails to withstand a test and this could be due to a defective b

44、attery, the test shall be repeated with a new set of batteries. 5.3 Application of forces The forces in the static load tests shall be applied sufficiently slowly to ensure that negligible dynamic force is applied. 5.4 Tolerances Unless otherwise stated, the accuracy of the test equipment shall be:

45、Forces: 5 % of the nominal force; Masses: 0,5 % of the nominal mass; Dimensions: 0,5 mm of the nominal dimension; Angles: 0,5 of the nominal angle; The tests are described in terms of the application of forces. Masses can however be used. The relationship 10 N = 1 kg may be used for this purpose. Un

46、less otherwise specified, the test forces may be applied by any suitable device which does not adversely affect the results. 5.5 Order of tests Unless otherwise stated in the test methods, the tests shall be carried out on the same infant swing in the order listed in this standard. 6 Chemical hazard

47、s migration of certain elements The migration of synthetic or natural elements from coatings of paint, varnish, lacquer, polymer and similar coatings on exterior surfaces shall not exceed the following amounts: Antimony: 60 mg/kg Arsenic: 25 mg/kg Barium: 1 000 mg/kg Cadmium: 75 mg/kg Chromium: 60 m

48、g/kg BS EN 16232:2013EN 16232:2013 (E) 11 Lead: 90 mg/kg Mercury: 60 mg/kg Selenium: 500 mg/kg These limits shall be verified in accordance with the test method given in EN 71-3:1994. Where a surface is coated with a multi-layer of paint or similar coating, the test sample shall not include the base

49、 material. A separate sample may be used for these tests. 7 Thermal hazards Fabrics shall not produce a surface flash when applying a flame as described in EN 1103. A separate sample may be used for these tests. 8 Mechanical hazards 8.1 General 8.1.1 Determination of the junction line The junction line is determined as in Figure 7. Key LL junction line 1 backrest 2 seat Figure 7 Junction line When the seat unit is in the form of a hammock, then a theoretical junction li