BS EN 15998-2010 Glass in building Safety in case of fire fire resistance Glass testing methodology for the purpose of classification《建筑玻璃 火灾安全性 用于分类的玻璃试验方法》.pdf

《BS EN 15998-2010 Glass in building Safety in case of fire fire resistance Glass testing methodology for the purpose of classification《建筑玻璃 火灾安全性 用于分类的玻璃试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 15998-2010 Glass in building Safety in case of fire fire resistance Glass testing methodology for the purpose of classification《建筑玻璃 火灾安全性 用于分类的玻璃试验方法》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15998:2010Glass in building Safety incase of fire, fire resistance Glass testing methodology forthe purpose of classificationLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STA

2、NDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15998:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/520/4, Properties and glazing methods.A list of organiza

3、tions represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 68555 2ICS 13.220.50; 81.040.20Compliance with a British Sta

4、ndard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, U

5、ncontrolled Copy, (c) BSIBS EN 15998:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15998 November 2010 ICS 13.220.50; 81.040.20 English Version Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification Verre dans la construct

6、ion - Scurit en cas dincendie, rsistance au feu - Mthodologie dessai du verre des fins de classification Glas im Bauwesen - Brandsicherheit, Feuerwiderstandsfhigkeit - Verfahrensweise von Glasprfungen zur Klassifizierung This European Standard was approved by CEN on 9 October 2010. CEN members are b

7、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the

8、 CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same s

9、tatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

10、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means

11、reserved worldwide for CEN national Members. Ref. No. EN 15998:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions

12、 .64 Principles 94.1 General 94.2 Testing to determine fire resistance as a product characteristic for a glass 94.3 Applicable fire resistance tests . 104.4 Glass products 104.5 Classification report(s) . 105 Sampling 105.1 General . 105.1.1 General remark 105.1.2 Classification of a glass product 1

13、15.1.3 Market application testing . 115.2 For determination of fire resistance as a product characteristic for a glass . 115.2.1 Classification of a glass product 115.2.2 Market application testing . 125.3 Non-sampled test results . 125.3.1 General . 125.3.2 Classification of a glass product 125.3.3

14、 Market application 125.4 Historic data 126 Use of test data in EXAP 13Annex A (informative) List of possible glass product standards (see 4.5) 14A.1 Monolithic basic or special basic glasses . 14A.2 Monolithic thermally toughened glasses . 14A.3 Laminated and laminated safety glasses . 15A.4 Insula

15、ting glass units . 15A.5 Coated glass 15Annex B (informative) Market application testing . 16B.1 General . 16B.2 Sampling 16B.2.1 General . 16B.2.2 ITT for system manufacturer . 16B.2.3 Test results to be used for extended applications (EXAP) 16B.2.4 Non-sampled test results . 16Bibliography . 18Lic

16、ensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 3 Foreword This document (EN 15998:2010) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European S

17、tandard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this

18、document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa

19、rd: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United K

20、ingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 4 Introduction According to mandate M/135 “Glass in building“, one of the essential characteristics that may be claimed is Safety in case of fire Resistance to

21、 fire (for glass for use in a glazed assembly intended specifically for fire resistance). However, glass products cannot be tested and classified for fire resistance without being incorporated into a fire resistant glazed assembly. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03

22、:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 5 1 Scope This European Standard specifies the testing methodology to be used for glass products that are claiming fire resistance. The methodology covers Initial Type Testing as defined in the relevant glass product standard. NOTE Thi

23、s document provides guidance with the declaration of the characteristic, Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance) for the CE marking. The same methodology can also be used to determine the performance classification

24、for market applications (see Annex B). The methodology covers all glass product types that may require testing and classification for fire resistance. Fire resistance testing covers end use applications for example: doors; partitions, walls (including curtain walling); floors, roofs; ceilings. 2 Nor

25、mative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1, Fire resistance test

26、s Part 1: General requirements EN 1363-2, Fire resistance tests Part 2: Alternative and additional procedures EN 1364-1, Fire resistance tests for non-loadbearing elements Part 1: Walls EN 1364-2, Fire resistance tests for non-loadbearing elements Part 2: Ceilings EN 1364-3, Fire resistance tests fo

27、r non-loadbearing elements Part 3: Curtain walling Full configuration (complete assembly) EN 1365-1, Fire resistance tests for loadbearing elements Part 1: Walls EN 1365-2, Fire resistance tests for loadbearing elements Part 2: Floors and roofs EN 1634-1, Fire resistance and smoke control tests for

28、door, shutter and openable window assemblies and elements of building hardware Part 1: Fire resistance tests for doors, shutters and openable windows EN 13501-2:2007+A1:2009, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tes

29、ts, excluding ventilation services EN 15254-4, Extended application of results from fire resistance tests Non-loadbearing walls Part 4: Glazed constructions Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 6 3 Terms

30、and definitions For the purposes of this document, the following terms and definitions apply. 3.1 extended field of application EXAP outcome of a process (involving the application of defined rules that may incorporate calculation procedures) that predicts, for a variation of a product property and/

31、or its intended end use application(s), a test result on the basis of one or more test result(s) to the same test standard EN 13501-2:2007+A1:2009 3.2 fire-resistant glass glass product group, i.e. monolithic, multiple layers or insulating glass unit, that when used in a fire resistant glazed assemb

32、ly can have its performance determined and classified in accordance with EN 13501-2 3.3 fire performance classification result of a fire resistance test(s) expressed as required in EN 13501-2 NOTE 1 The classification is reported with respect to integrity (E), integrity and radiation (EW), integrity

33、 and insulation (EI), and loadbearing capacity and integrity (RE) and loadbearing capacity, integrity an insulation (REI). NOTE 2 The classification of a specific glass product will be one or more of E, EW, EI, RE, REI NOTE 3 The time obtained for different classifications may be different, e.g. EW

34、30, EI 20. 3.4 framing system frame profile and fixings to the supporting structure (e.g. wall) NOTE See Figure 1, B. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 7 Key A glazing system B framing systems Framing

35、system consisting of: 1 frame; 2 metal anchor, screwed or bolted to the wall 4 by a fixing anchor 3; 3 screw and fixing anchor; 4 wall. Glazing system consisting of: 5 bead, screwed or clipped; 6 bead fixing; 7 glazing strip; 8 glass; 9 sealing of gasket; 10 setting block. Figure 1 Fire resistant me

36、tal framing and glazing system Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 8 3.5 glazed assembly fire-resistant glass together with the framing system and glazing materials subjected to the fire resistance test

37、NOTE 1 Also referred to as glazed element, glazed construction, glazed screen. NOTE 2 See Figure 1. 3.6 glazing system fire-resistant glass together with the glazing materials used in the fire resistance test to glaze the glass into its framing system NOTE See Figure 1, A. 3.7 glazing materials mate

38、rials used to glaze the fire-resistant glass into its frame, e.g. glazing strips, beads and bead fixings, setting blocks, gaskets and sealant 3.8 historic data test data obtained by tests previously performed in accordance with the European Standard with the following provisos: same product, same ch

39、aracteristic(s), same or more onerous test method, sampling method and attestation of conformity 3.9 initial type testing ITT determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardized, tabul

40、ated or general accepted values, standardized or recognized calculation methods, test reports when made available, etc.), in accordance with this European Standard that demonstrates compliance with this European Standard NOTE The European Standard referred to is the applicable “Evaluation of conform

41、ity/product standard” for the glass product under consideration, e.g. EN 1279-5; EN 12150-2; EN 13024-2; EN 14449. 3.10 reference test fire resistance test in accordance with the appropriate standard (see 4.3), on which the extended application is based and the results of which are used as the main

42、source of data for the extended application NOTE 1 This test may also be used as the initial type test to support CE marking of fire-resistant glass or as a market application test. In each case, Annex ZA of the product standard should be considered: e.g. involvement of a Notified Certification Body

43、, sample traceability, product sampling (when necessary) and checks of the factory production control. NOTE 2 The reference test provides the main source of data to determine the following: performance rating (integrity, integrity with radiation or integrity with insulation); maximum pane area and d

44、imensions for the fire-resistant glass; maximum dimensions of the fire-resistant glazed element for each type of frame material. NOTE 3 The reference test may also provide other data to assist in determining, through EXAP rules, the following: permitted dimensional changes to the framing system; any

45、 changes to the glazing system. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/06/2011 03:32, Uncontrolled Copy, (c) BSIBS EN 15998:2010EN 15998:2010 (E) 9 3.11 test report document that covers the results of tests undertaken on a representative sample of the product from production or on

46、 a prototype design of the product NOTE This definition comes from an “Evaluation of conformity/product standard”. 3.12 technical file document, produced and maintained by the manufacturer, that contains all relevant information dealing with product traceability/testing/manufacture, etc. 3.13 virtua

47、l assembly glazed assembly that is defined by the glass manufacturer for the Initial Type Testing of the characteristic “Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance)“ NOTE 1 The acceptable components and the scope of app

48、lication for the “Virtual Assembly“ are those defined by the relevant classification report. NOTE 2 Classification is in accordance with EN 13501-2 and based upon: a) fire resistance test(s) for direct application; or b) for extended application according to EXAP rules. 4 Principles 4.1 General Acco

49、rding to EN 357:2004, 5.1, the fire resistance classification shall be related to the complete glazed element which incorporates the glass products and all given dimensions and tolerances. Therefore the principle is established that the glass shall be fitted into a framing system, complete with seals and mounting and fixing arrangements. Therefore as a consequence the glass cannot be classified on its own. The classification relates to a com