BS EN 15518-1-2011 Winter maintenance equipment Road weather information systems Global definitions and components《冬季维修设备 道路气象信息系统 全球定义和组件》.pdf

《BS EN 15518-1-2011 Winter maintenance equipment Road weather information systems Global definitions and components《冬季维修设备 道路气象信息系统 全球定义和组件》.pdf》由会员分享，可在线阅读，更多相关《BS EN 15518-1-2011 Winter maintenance equipment Road weather information systems Global definitions and components《冬季维修设备 道路气象信息系统 全球定义和组件》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15518-1:2011Winter maintenanceequipment Road weatherinformation systemsPart 1: Global definitions and componentsBS EN 15518-1:2011 BRITISH STANDARDNational forewordThis Bri

2、tish Standard is the UK implementation of EN 15518-1:2011.The UK participation in its preparation was entrusted to TechnicalCommittee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can beobtained on request to its secretary.This publicat

3、ion does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 65401 5ICS 07.060; 13.030.40; 35.240.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publish

4、ed under the authority of theStandards Policy and Strategy Committee on 31 March 2011.Amendments issued since publicationDate Text affectedBS EN 15518-1:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15518-1 February 2011 ICS 07.060; 13.030.40; 35.240.99 English Version Winter maintenance

5、equipment - Road weather information systems - Part 1: Global definitions and components Matriels de viabilit hivernale - Systmes dinformation mtorologique routire - Partie 1: Dfinitions globales et composants Winterdienstausrstung - Straenzustands- und Wetterinformationssysteme - Teil 1: Allgemeine

6、 Definitionen und Komponenten This European Standard was approved by CEN on 1 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

7、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un

8、der the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France

9、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR N

10、ORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15518-1:2011: EBS EN 15518-1:2011EN 15518-1:2011 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative ref

11、erences 53 Global definition and components .53.1 Description of concept 53.2 Description of components 73.2.1 Road weather station 73.2.2 Weather observation and forecast .73.2.3 Mobile or portable data acquisition systems 73.2.4 Traffic data 73.2.5 Cameras 73.2.6 PC, servers, data concentrators .7

12、3.2.7 Models, algorithms 73.2.8 Man machine interface 83.2.9 Data transfer .83.2.10 Communication to other systems 8Bibliography 9Figures Figure 1 Components of a RWIS system 6BS EN 15518-1:2011EN 15518-1:2011 (E) 3 Foreword This document (EN 15518-1:2011) has been prepared by Technical Committee CE

13、N/TC 337 “Winter maintenance and road service area maintenance equipment”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting n

14、ational standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 15518, Winter ma

15、intenance equipment Road weather information systems, comprises of the following parts: Part 1: Global definitions and components Part 2: Road weather Recommended observation and forecast Part 3: Requirements on measured values of stationary equipments According to the CEN/CENELEC Internal Regulatio

16、ns, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

17、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15518-1:2011EN 15518-1:2011 (E) 4 Introduction Road Weather Information Systems (RWIS) are complex structures used for road maintenance decision support, which feature as a ru

18、le the following components: meteorological sensors and instruments, transmission technology, computer systems for processing, representation and storing of information, road weather forecasts and alarms, in relation to traffic control and traffic information systems and more. With a set terminology

19、 for the components and the meteorological expressions, an attempt is made to counteract a diversity of terms and designations for identical phenomena. BS EN 15518-1:2011EN 15518-1:2011 (E) 5 1 Scope This European Standard defines the “Road Weather Information Systems” (RWIS) concept for public road

20、s and traffic surfaces. This standard applies to the acquisition of data on weather-related road and environment conditions as well as their forecast. This information is typically used for road maintenance and can serve other systems like traffic management, road users information, data models, etc

21、. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Not applicable. 3 Global

22、 definition and components 3.1 Description of concept A Road Weather Information System (RWIS) can be defined as a combination of technologies that uses historic and current climatological data to develop road and weather information (for example, nowcasts and forecasts) to aid in roadway-related de

23、cision making. The three main elements of RWIS are: environmental sensor tools (fixed or mobile) to collect data; models and other advanced processing systems to develop forecasts and tailor the information into an easily understood format; dissemination platforms on which to display the tailored in

24、formation.BS EN 15518-1:2011EN 15518-1:2011 (E) 6 Figure 1 Components of a RWIS systemBS EN 15518-1:2011EN 15518-1:2011 (E) 7 3.2 Description of components 3.2.1 Road weather station Road weather stations are the components of RWIS which provide the environmental data. Many types of data can be coll

25、ected, the most common being (non exhaustive list): weather air temperature, amount and type of precipitation, visibility, dew point, relative humidity, and wind speed and direction, and cloud cover; road condition pavement temperature, subsurface temperature, surface condition (dry, wet or frozen),

26、 amount of de-icing chemical on the roadway, and freezing point of the road surface. These data are collected by sensors placed at the roadside or in the roadway itself. Remote processing units (RPUs) placed along the roadway contain some or all of the road and weather sensors. In some cases, the pa

27、vement sensors are located apart from the RPU, with several pavement sensors capable of being linked to one RPU. However, these RPUs are usually connected to a central server for further data processing. 3.2.2 Weather observation and forecast The raw data are used directly or in coordination with a

28、service provider to prepare nowcasts or forecasts. Both can be used to predict site-specific weather and pavement conditions and to support maintenance operations. 3.2.3 Mobile or portable data acquisition systems Mobile data acquisition systems monitor atmospheric parameters and road conditions at

29、the time and position of the mobile. Portable data acquisition systems monitor atmospheric parameters and road conditions at a given time and position. These data are complementary to stationary road weather stations. 3.2.4 Traffic data The traffic volume, typology, characteristics could be taken in

30、to account for the analysis of RWIS data and models. On the other hand, the analysis of RWIS raw or processed data could be included in road management tools. 3.2.5 Cameras The analysis of raw or processed images, depending on the spectra, could be included in road management tools, such as monitori

31、ng road surface condition (snow, de-icing application control, etc.), or traffic volume. 3.2.6 PC, servers, data concentrators Local and/or central processing units ensure collection, storage, processing and distribution of the data. Several communication mechanisms can be used for information colle

32、ction and distribution, like Internet, Intranet, satellite, dial-up lines, etc. 3.2.7 Models, algorithms The models and algorithms aggregate and process data from different sources, according to the specifications of the final user (road managers, forecasters, and road users). BS EN 15518-1:2011EN 1

33、5518-1:2011 (E) 8 3.2.8 Man machine interface The man machine interface consists of visualization and operation tools, which should be adapted to the needs of the final user (road managers, forecasters, and road users). 3.2.9 Data transfer Data transfer can use various media, like phone lines, radio

34、 signals, etc. The characteristics of the data transfer should not impair the further use of the data provided by the different sensors. 3.2.10 Communication to other systems Pertinent RWIS information can be transmitted to other systems in order to improve traffic security and fluidity, like variab

35、le message signs, on-board navigation systems, etc. BS EN 15518-1:2011EN 15518-1:2011 (E) 9 Bibliography EN 15144, Winter maintenance equipment Terminology Terms for winter maintenance This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible

36、for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters38

37、9 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and se

38、rv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Memb

39、ers an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Sho

40、p on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of thos

41、e that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic inf

42、ormation services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of

43、these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in a

44、ll BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means e

45、lectronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: