BS EN 14967-2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特性》.pdf

《BS EN 14967-2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特性》.pdf》由会员分享，可在线阅读，更多相关《BS EN 14967-2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics《防水用柔性薄板 沥青防潮层 定义和特性》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 14967:2006ICS 91.100.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDFlexible sheets forwaterproofing Bitumen damp proofcourses Definitionsand characteristicsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c)

2、BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 June2009. BSI 2009ISBN 978 0 580 54459 0Amendments/corrigenda issued since publicationDate CommentsBS EN 14967:2006National forewordThis British Standard is the UK implementation of EN 14967:2

3、006.The UK participation in its preparation was entrusted to TechnicalCommittee B/546/6, Damp proof courses for masonry.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contr

4、act. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN

5、14967May 2006ICS 91.100.50English VersionFlexible sheets for waterproofing - Bitumen damp proof courses- Definitions and characteristicsFeuilles souples dtanchit - Feuilles bitumineuses contreles remontes capillaires dans les murs - Dfinitions etcaractristiquesAbdichtungsbahnen - Bitumen-Mauersperrb

6、ahnen -Definitionen und EigenschaftenThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-d

7、ate lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the r

8、esponsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Irel

9、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36

10、B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14967:2006: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 2 Contents Page Fo

11、reword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Product types.7 5 Product characteristics.7 5.1 General7 5.2 Deviation from test sample dimensions7 5.3 Visible defects7 5.4 Dimensions and tolerances7 5.5 Thickness and mass per unit area.7 5.6 Watertightness.8

12、5.7 Resistance to impact.8 5.8 Durability 8 5.8.1 Against artificial ageing/degradation 8 5.8.2 Against chemicals .8 5.9 Flexibility at low temperatures (pliability) .8 5.10 Resistance to tearing (nail shank) .8 5.11 Joint strength.8 5.12 Water vapour transmission properties8 5.13 Reaction to fire.9

13、 5.14 Dangerous substances .9 6 Evaluation of conformity.9 6.1 General9 6.2 Initial type testing 9 6.2.1 General9 6.2.2 Sampling 11 6.3 Factory production control (FPC) . 11 6.3.1 General. 11 6.3.2 Frequency of testing 11 7 Product data sheet . 12 8 Marking, labelling and packaging . 12 Annex A (inf

14、ormative) Information about chemical resistance . 13 Annex B (informative) Example of product data sheet. 15 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 17 Bibliography. 24 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA S

15、TANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 3 Foreword This document (EN 14967:2006) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the

16、 status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. This document has been prepared under a mandate given to CEN by the European Commission

17、and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

18、 following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

19、, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 4 Introduction The purpose of damp proof courses is to prevent water rising up a wall from the ground, water moving fr

20、om one part of a wall to another and to deflect water from an inner wall of a cavity wall construction to the exterior of the building. Damp proof courses may also be used in masonry chimneys and parapet walls to protect the inside of the building from water moving down from above. They should be de

21、signed in conjunction with flashings and sheets for waterproofing, including roofing sheets and damp proof sheets, to ensure a continuous barrier and should deflect water to the exterior of a building so that it can drain away safely. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009

22、 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 5 1 Scope This European Standard specifies the characteristics of flexible sheets of bitumen intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation of con

23、formity of the products with the requirements of this European Standard. This European Standard does not cover related products such as preformed cavity trays, coping and flashings. 2 Normative references The following referenced documents are indispensable for the application of this document. For

24、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1109, Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flexibility at low temperature EN 1296, Flexib

25、le sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature EN 1847, Flexible sheets for waterproofing Plastic and rubber sheets for roof waterproofing Methods for exposure to liquid chemicals, including wat

26、er EN 1848-1, Flexible sheets for waterproofing Determination of length, width and straightness Part 1: Bitumen sheets for roof waterproofing EN 1849-1, Flexible sheets for waterproofing Determination of thickness and mass per unit area Part 1: Bitumen sheets for roof waterproofing EN 1850-1, Flexib

27、le sheets for waterproofing Determination of visible defects Part 1: Bitumen sheets for roof waterproofing EN 1928, Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Determination of watertightness EN 1931, Flexible sheets for waterproofing Bitumen, plastic

28、and rubber sheets for roof waterproofing Determination of water vapour transmission properties EN 12310-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) EN 12317-1, Flexible sheets for waterproofing Part 1: Bitumen

29、sheets for roof waterproofing Determination of shear resistance of joints EN 12691, Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Determination of resistance to impact EN 13416:2001, Flexible sheets for waterproofing Bitumen, plastic and rubber sheets fo

30、r roof waterproofing Rules for sampling EN 13501-1:2002, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN ISO 11925-2, Reaction to fire tests - Ignitability of building products subjected to direct impingement of

31、 flame - Part 2: Single-flame source test (ISO 11925-2:2002) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13416:2

32、001 and the following apply: 3.1 waterproofing action to prevent the passage of water from one plane to another 3.2 waterproofing sheet factory-made flexible sheet including any carriers, facings, surface texture and/or backing 3.3 bitumen damp proof course flexible sheets of bitumen or composites b

33、ased on these materials whose function is to prevent liquid water passing from one part of the wall to another. In composite sheets the bitumen is the functional component 3.4 carrier material incorporated into or onto the factory-made waterproofing sheet to ensure its stability and/or mechanical re

34、sistance 3.5 surfacing material applied to the surfaces of waterproofing sheets as an anti-sticking substance on one or both surfaces of the damp proof course 3.6 manufacturers limiting value (MLV) value stated by the manufacturer to be met during testing. The manufacturers limiting value can be a m

35、inimum or a maximum value according to statements made under product characteristics of this European Standard 3.7 manufacturers declared value (MDV) value declared by the manufacturer accompanied by a declared tolerance 3.8 oxidised bitumen straight run petroleum bitumen or a fluxed bitumen which h

36、as been hardened and rendered less temperature susceptible by blowing with air at high temperature with or without the use of a catalyst 3.9 elastomeric bitumen petroleum bitumen and/or oxidized bitumen modified by the addition of thermoplastic rubbers 3.10 plastomeric bitumen petroleum bitumen and/

37、or oxidized bitumen modified by the addition of polyolefin or polyolefin copolymer compound 3.11 sampling procedure used to select or constitute a sample 3.12 sample sheet from which a test piece is taken Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c)

38、 BSIBS EN 14967:2006EN 14967:2006 (E) 7 3.13 test piece part of the sample from which test specimens are taken 3.14 test specimen piece of precise dimensions taken from the test piece 4 Product types For bitumen damp proof courses there are no product types. 5 Product characteristics 5.1 General 5.1

39、.1 Where a tolerance is limited by this European Standard it does not have to be declared by the manufacturer. 5.1.2 When tested for purposes other than initial type testing or factory production control, the tests to determine product characteristics indicated in this European Standard shall be sta

40、rted within 1 month of delivery of the product from the manufacturer. 5.2 Deviation from test sample dimensions Where the contours of the product make it impossible to obtain a test sample of the required dimensions, or otherwise render the test impracticable, testing may be carried out either on sa

41、mples of different dimensions or if still impracticable on the equivalent flat sheet of the same thickness as the finished product. Any such deviations from the test method shall be recorded on the test report and the product data sheet. 5.3 Visible defects The product shall be free of visible defec

42、ts determined in accordance with EN 1850-1. 5.4 Dimensions and tolerances The length, width and straightness shall be determined in accordance with EN 1848-1. The length and width shall be greater than or equal to the manufacturers limiting value (MLV). The maximum deviation from straightness shall

43、not exceed 20 mm per 10 m length, or in proportion for other lengths (e.g. 10 mm per 5 m length). 5.5 Thickness and mass per unit area The thickness and mass per unit area shall be determined in accordance with EN 1849-1. Where a product is specified by mass per unit area, the mass shall lie within

44、the declared tolerance of the manufacturers declared value. Where it is not practicable to obtain a sample (see 5.2), a larger sample area shall be used and the deviation from the test method noted. If a product is specified by thickness, the thickness shall lie within the tolerance of the manufactu

45、rers declared value. No single measurement shall lie outside the declared tolerance of the manufacturers declared value. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 20/10/2009 09:10, Uncontrolled Copy, (c) BSIBS EN 14967:2006EN 14967:2006 (E) 8 5.6 Watertightness Watertightness shall be d

46、etermined by Method A or B of EN 1928 using a pressure of 2 kPa and shall give a pass result. 5.7 Resistance to impact Resistance to impact shall be evaluated when subject to regulatory requirements, and may be evaluated when not subject to such requirements. It shall be determined in accordance wit

47、h EN 12691 and the result shall be greater than or equal to the manufacturers limiting value. 5.8 Durability 5.8.1 Against artificial ageing/degradation In order to verify the artificial ageing behaviour of the product, watertightness shall be determined after exposure in accordance with EN 1296 for

48、 a period of 12 weeks. The watertightness shall be determined in accordance with EN 1928 Method A or B at a pressure of 2 kPa and shall give a pass result. 5.8.2 Against chemicals Information about the chemical resistance of bitumen is given in Annex A. Where the product is likely to come into conta

49、ct with a “not stable in all cases“ substance, the resistance shall be evaluated according to EN 1847, the test parameters being declared with the result, and subsequently tested according to EN 1928, giving a pass result. NOTE Experience has shown that water has little or no effect upon the in-service performance of reinforced bitumen sheets. 5.9 Flexibility at low temperatures (pliability) The flexibility at low temperature shall be evaluated when subject to regulatory requirements, and may be evaluated when not subject to