BS EN 14678-3-2013 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial.pdf

《BS EN 14678-3-2013 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial.pdf》由会员分享，可在线阅读，更多相关《BS EN 14678-3-2013 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14678-3:2013LPG equipment and accessories Construction andperformance of LPG equipmentfor automotive filling stationsPart 3: Refuelling installations at commercialand indus

2、trial premisesBS EN 14678-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14678-3:2013. The UK participation in its preparation was entrusted to TechnicalCommittee PVE/19, LPG containers and their associated fittings. A list of organizations represented o

3、n this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 71509

4、 9 ICS 75.200 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 14678-3:2013EU

5、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14678-3 January 2013 ICS 75.200 English Version LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises quipements pour GP

6、L et leurs accessoires - Construction et caractristiques des quipements GPL dans les stations-service - Partie 3 : Installations de ravitaillement dans les locaux privs/commerciaux et industriels Flssiggas-Gerte und Ausrstungsteile - Bau- und Arbeitsweise von Flssiggas-Gerten fr Autogas-Tankstellen

7、- Teil 3: Tankanlagen fr private und industrielle Tankstellen This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w

8、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any oth

9、er language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,

10、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMM

11、ITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14678-3:2013: EBS EN 14678-3:2013EN 1

12、4678-3:2013 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 Requirements .74.1 Environmental 74.2 General 84.3 Design pressure .84.4 Design temperature .84.5 Materials .84.6 LPG storage 94.6.1 Design .94.6.2 Installation 94.6.3 Equipping .94.

13、6.4 Mechanical protection .94.7 Pumping units 94.7.1 General 94.7.2 Submersible pump 104.7.3 External pump . 104.8 Pipework systems and supports . 104.9 Delivery hose . 104.10 Dead man type shut-off device 104.11 Valves and pressure indication . 104.11.1 Shut-off valves 104.11.2 Hydrostatic relief v

14、alves 104.11.3 Pressure indication. 114.12 Breakaway coupling . 114.13 Electrical installation 114.13.1 General . 114.13.2 Electrical cables 115 Testing of the installation 116 Commissioning . 127 Signage 12Annex A (informative) Explanatory drawings 13Annex B (informative) Environmental checklist 16

15、Bibliography . 17BS EN 14678-3:2013EN 14678-3:2013 (E) 3 Foreword This document (EN 14678-3:2013) has been prepared by Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a n

16、ational standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

17、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 14678 consists of the following parts: EN 14678-1, LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 1: Dispensers; EN 14678-2, LP

18、G equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 2: Components other than dispensers, and installation requirements; EN 14678-3, LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations P

19、art 3: Refuelling installations at private and industrial premises. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

20、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14678-3:2013E

21、N 14678-3:2013 (E) 4 Introduction This European Standard calls for the use of substances and procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at

22、 any stage. Protection of the environment is a key political issue in Europe and elsewhere. Protection of the environment is taken in a very broad sense. What is meant is the total life cycle aspects of, e.g. a product on the environment, including expenditure of energy and during all phases from mi

23、ning of raw materials, fabrication, packaging, distribution, use, scrapping, recycling of materials, etc. NOTE Annex B indicates which clauses in this European Standard address environmental issues. Clauses addressing environmental issues are restricted to a general guidance. Limiting values can be

24、specified in national laws. It is recommended that companies using this European Standard develop an environmental management policy. For guidance see EN ISO 14021 3, EN ISO 14024 4 and EN ISO 14025 5. BS EN 14678-3:2013EN 14678-3:2013 (E) 5 1 Scope This European Standard covers the equipment and in

25、stallation requirements for LPG refuelling installations, which are required to safely dispense LPG at commercial and industrial premises. This European Standard does not cover public LPG filling stations. This European Standard does not cover nautical LPG refuelling installations. This European Sta

26、ndard does not cover on-site and off-site safety distances. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the la

27、test edition of the referenced document (including any amendments) applies. EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment EN 837-1, Pressure gauges Part 1: Bourdon tube pressure gauges Dimensions, metrology, requirements and testing EN 1762, Rubber hoses and

28、hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) Specification EN 12542, LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not gre

29、ater than 13 m Design and manufacture EN 13445 (all parts), Unfired pressure vessels EN 13463-1, Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements EN 14570, LPG equipment and accessories Equipping of LPG tanks, overground and underground EN 14678-1,

30、 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 1: Dispensers prEN 16125, LPG equipment and accessories Pipework systems and supports LPG liquid phase and vapour pressure phase EN 50525-2-51, Electric cables Low voltage energy cables

31、of rated voltages up to and including 450/750 V (U0/U) Part 2-51: Cables for general applications Oil resistant control cables with thermoplastic PVC insulation EN 50525-2-21, Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-21: Cables for gener

32、al applications Flexible cables with crosslinked elastomeric insulation EN 60079-10-1, Explosive atmospheres Part 10-1: Classification of areas Explosive gas atmospheres (IEC 60079-10-1) EN 60079-14 Explosive atmospheres Part 14: Electrical installations design, selection and erection (IEC 60079-14)

33、 BS EN 14678-3:2013EN 14678-3:2013 (E) 6 EN 60947-3 Low-voltage switchgear and control-gear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 liquefi

34、ed petroleum gas LPG low pressure liquefied gas composed of one or more light hydrocarbons which are assigned to UN 1011, UN 1075, UN 1965, UN 1969 or UN 1978 only and which consists mainly of propane, propene, butane, butane isomers, butene with traces of other hydrocarbon gases 3.2 accessories dev

35、ices connected to the system whose main function is not for the storage or conveyance of LPG Note 1 to entry: Safety and pressure accessories are defined in the PED. 3.3 dead man type shut-off device manually operated non-latching device which immediately stops flow when released 3.4 excess flow val

36、ve valve designed to close automatically, with a small residual flow, when the fluid flow passing through it exceeds a predetermined value, and to re-open when the pressure differential across the valve has been restored below a certain value 3.5 pressure relief valve self-closing valve which automa

37、tically, without the assistance of any energy other than that of the vapour concerned, discharges vapour at a predetermined pressure, and operates with a pop action 3.6 hydrostatic relief valve self-closing valve which automatically, without the assistance of any energy other than that of the fluid

38、concerned, discharges fluid at a predetermined pressure 3.7 shut-off valve valve to provide a leak-tight seal which is operated either manually, remotely or is self-closing 3.8 filling nozzle mechanical system, fitted to the hose of the dispensing system, consisting of a filling nozzle body, operati

39、ng mechanism, including sealing elements and a service gasket if required 3.9 contents gauge device to indicate the liquid level or contents in a pressure vessel 3.10 pressure vessel assembly of the pressure-retaining envelope (including the openings and their closures) and non-pressure-retaining pa

40、rts attached directly to it BS EN 14678-3:2013EN 14678-3:2013 (E) 7 3.11 mounded vessel pressure vessel above or partially underground of which the part above the ground is completely covered 3.12 underground vessel vessel below the surrounding ground level and completely covered 3.13 overground ves

41、sel pressure vessel above the surrounding ground level and not covered 3.14 submersible pump pump which is completely or partially immersed in the liquid LPG 3.15 external pump pump which is installed on the LPG delivery pipe-work 3.16 hazardous area area in which an explosive atmosphere is or may b

42、e present, in a quantity such as to require special precautions for the construction and installation of equipment and use of apparatus 3.17 breakaway coupling coupling which separates at a predetermined section when required and each separated section contains a self-closing shut-off valve, which s

43、eals automatically Note 1 to entry: Also referred to as a safe break. 3.18 break point weakened section in a pipe or fitting intended to break when excessive force is applied 3.19 installer person or organisation who, by qualification, training, experience and resources assumes technical responsibil

44、ity for the installation of an LPG filling station 4 Requirements 4.1 Environmental 4.1.1 The manufacturer shall endeavour to acquire materials and components from suppliers who have a declared environmental policy, see EN ISO 14021, EN ISO 14024 and EN ISO 14025. 4.1.2 Materials should be selected

45、to optimise product durability and lifetime and consideration should be made to avoiding the selection of rare or hazardous materials. 4.1.3 Consideration should be made to use recycled or reused materials, and to the selection of materials which can then be subsequently recycled. 4.1.4 The installe

46、r shall endeavour to minimise use and wastage of material during all the installation process, with particular attention to welding and allied processes. Unavoidable waste/scrap material shall be recycled. BS EN 14678-3:2013EN 14678-3:2013 (E) 8 4.1.5 Noise levels from installation process shall be

47、evaluated and measures put in place to minimise the impact upon the external environment. 4.2 General 4.2.1 The design of the installation shall take into account stresses resulting from internal and external loads such as pressure, thermal expansion, contraction, vibration and seismic activity. 4.2

48、.2 The installer shall be provided with a drawing of the layout of the installation on which the hazardous areas are shown including their classification in accordance with EN 60079-10-1. 4.2.3 Only components suitable for the selected hazardous area shall be installed. 4.2.4 All handles, switches a

49、nd controls required for operational and emergency purposes shall be easily accessible. 4.2.5 Remotely operated shut-off valves fitted to the liquid outlet of the storage vessel shall be of the normally closed type. Other remotely operated shut-off valves fitted in the system may be of the normally open position provided that safety is not compromised. 4.2.6 All equipment and components shall be installed according to the manufacture