BS EN 13915-2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义、要求和试验方法》.pdf

《BS EN 13915-2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义、要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13915-2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions requirements and test methods《带蜂窝纸板芯的预制石膏板面板 定义、要求和试验方法》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions, requirements and test methodsBS EN 13915:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13915 July 2017 ICS 91.100.10 Super

2、sedes EN 13915:2007English Version Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods Panneaux de cloison prfabriqus en plaques de pltre me cellulaire en carton - Dfinitions, exigences et mthodes dessai Gipsplatten-Wandbaufertigtafel

3、n mit einem Kartonwabenkern - Begriffe, Anforderungen und Prfverfahren This European Standard was approved by CEN on 29 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

4、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

5、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

6、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

7、EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13915:2017 E

8、National forewordThis British Standard is the UK implementation of EN 13915:2017. It supersedes BS EN 13915:2007, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/544, Plastering, rendering, dry lining.A list of organizations represented on this commi

9、ttee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92280 0ICS 91.100.

10、10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13915:2017EU

11、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13915 July 2017 ICS 91.100.10 Supersedes EN 13915:2007English Version Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods Panneaux de cloison prfabriqus en plaques de pltre me cellula

12、ire en carton - Dfinitions, exigences et mthodes dessai Gipsplatten-Wandbaufertigtafeln mit einem Kartonwabenkern - Begriffe, Anforderungen und Prfverfahren This European Standard was approved by CEN on 29 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

13、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European

14、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are th

15、e national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

16、a, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form

17、and by any means reserved worldwide for CEN national Members. Ref. No. EN 13915:2017 EBS EN 13915:2017EN 13915:2017 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Requirements . 6 4.1 Fire behaviour 6 4.1.1 Reaction to fire . 6 4.1.2 Fire r

18、esistance 6 4.2 Impact resistance 7 4.3 Water vapour permeability (expressed as water vapour resistance factor) 7 4.4 Flexural strength (expressed as deflection under a defined load) . 7 4.5 Direct airborne sound insulation 7 4.6 Acoustic absorption 7 4.7 Thermal resistance (expressed as thermal con

19、ductivity) . 8 4.8 Dimensions and tolerances . 8 4.9 Alignment . 8 4.10 Core adhesion . 8 4.11 Release of dangerous substance 8 4.12 Flatness of panels 9 5 Test methods 9 5.1 Sampling . 9 5.2 Dimensional measurements . 9 5.2.1 Width . 9 5.2.2 Length 9 5.2.3 Thickness . 9 5.3 Determination of alignme

20、nt . 11 5.3.1 Principle 11 5.3.2 Apparatus 11 5.3.3 Procedure 11 5.3.4 Expression of results . 12 5.4 Determination of deflection . 12 5.4.1 Principle 12 5.4.2 Apparatus 12 5.4.3 Procedure 12 5.4.4 Expression of results . 13 5.5 Determination of the core adhesion . 13 5.5.1 Principle 13 5.5.2 Appara

21、tus 13 5.5.3 Procedure 13 5.5.4 Expression of results . 13 5.6 Determination of surface hardness of the panel 14 5.6.1 Principle 14 5.6.2 Apparatus 15 5.6.3 Procedure 15 5.6.4 Expression of results . 17 5.7 Determination of the panels flatness . 17 BS EN 13915:2017EN 13915:2017 (E) 3 5.7.1 Principle

22、 . 17 5.7.2 Apparatus and specimens 17 5.7.3 Procedure 17 5.7.4 Expression of results . 17 6 Assessment and verification of constancy of performance AVCP 17 6.1 General . 17 6.2 Type testing 18 6.2.1 General . 18 6.2.2 Determination of the product type 18 6.2.3 Further type testing . 18 6.3 Factory

23、production control (FPC) . 18 6.3.1 General . 18 6.3.2 Personnel . 19 6.3.3 Equipment . 19 6.3.4 Raw materials and components 19 6.3.5 Product testing and evaluation . 19 6.3.6 Traceability and marking 19 6.3.7 Non-conforming products . 19 6.3.8 Corrective action . 19 6.3.9 Other test methods . 19 7

24、 Designation of the prefabricated gypsum plasterboard panels 19 8 Marking, labelling and packaging . 20 Annex A (informative) Sampling procedure for testing 21 A.1 General . 21 A.2 Sampling procedure 21 Annex B (normative) Mounting and fixing in the test according to EN 13823 (SBI test) . 22 B.1 Gen

25、eral . 22 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.305/2011 24 ZA.1 Scope and relevant characteristics 24 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 25 ZA.3 Assignment of AVCP tasks . 25 Bibliography . 27 BS EN 13915:201

26、7EN 13915:2017 (E) 4 European foreword This document (EN 13915:2017) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an

27、 identical text or by endorsement, at the latest by January 2018, and conflicting national standards shall be withdrawn at the latest by April 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible

28、 for identifying any or all such patent rights. This document supersedes EN 13915:2007. The main changes that have been made in this new edition of EN 13915 are the following: a) deletion of the Introduction; b) normative references have been updated; c) Clause 6 and Annex ZA have been revised to be

29、 in line with the Construction Products Regulation (CPR); d) document has been editorially revised. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. Fo

30、r relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. This European standard includes: informative Annex A concerning sampling procedure for testing; normative Annex B concerning SBI mounting and fixing for prefabricated panels made o

31、f plasterboard facings and a cellular paperboard core. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl

32、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13915:2017EN 13915

33、:2017 (E) 5 1 Scope This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings

34、. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the core i

35、s not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be mea

36、sured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Indust

37、ry. It provides the assessment and verification of constancy of performance of the products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applie

38、s. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 520:2004+A1:2009, Gypsum plasterboards Definitions, requirements and test methods EN 12664:2001, Thermal performance of building materials and products Determination of thermal resistance

39、by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2:2016, Fire classi

40、fication of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13823:2010+A1:2014, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single bur

41、ning item EN 13963:2014, Jointing materials for gypsum boards Definitions, requirements and test methods EN ISO 354:2003, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 717-1:2013, Acoustics Rating of sound insulation in buildings and of building elements Par

42、t 1: Airborne sound insulation (ISO 717-1:2013) EN ISO 10140-2:2010, Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) EN ISO 10456:2007, Building materials and products Hygrothermal properties Tabulated desi

43、gn values and procedures for determining declared and design thermal values (ISO 10456:2007) BS EN 13915:2017EN 13915:2017 (E) 6 EN ISO 11925-2:2010, Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2:2010) EN ISO 12

44、572:2016, Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method (ISO 12572:2016) ISO 7892:1986, Vertical building elements Impact resistance tests Impact bodies and general test procedures 3 Terms and definitions For the purposes

45、 of this document, the following terms and definitions apply. 3.1 prefabricated gypsum plasterboard panel panel that is made up of two gypsum plasterboards according to EN 520, possibly up to 15 mm thick, bonded to both sides of a cellular paperboard core Note 1 to entry: It is commonly named “panel

46、” in this standard. 3.2 panel facing exposed surface of plasterboard to receive either coating or finishing 3.3 length dimension of the panel parallel to the paper covered edges, measured on the panel facing 3.4 width dimension of the panel perpendicular to the paper covered edges, measured on the p

47、anel facing 3.5 thickness distance between the panel facings 4 Requirements 4.1 Fire behaviour 4.1.1 Reaction to fire When subject to regulatory requirements, prefabricated gypsum plasterboard panels shall be tested and classified in accordance with EN 13501-1. Prefabricated gypsum plasterboard pane

48、ls tested according to EN 13823 (SBI test) shall be mounted and fixed in accordance with Annex B or when the producer wishes to claim performance for a specific intended use, the mounting and fixing shall be representative of that intended use. Prefabricated gypsum plasterboard panels tested accordi

49、ng to EN ISO 11925-2 (Ignitability) shall be tested with surface attack only due to the fact that edge attack cannot occur in end use conditions. 4.1.2 Fire resistance NOTE Resistance to fire is a characteristic dependent on an assembled system and not of the product in isolation. BS EN 13915:2017EN 13915:2017 (E) 7 When required, the fire resistance of a system including prefabricated gypsum plasterboard panels shall be classified according to EN 13501-2. 4.2 Impact resistance NOTE Impact resistance is a ch