BS EN 13451-6-2001 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards《游泳池设备 回转板专门安全要求和试验方法 》.pdf

《BS EN 13451-6-2001 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards《游泳池设备 回转板专门安全要求和试验方法 》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13451-6-2001 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards《游泳池设备 回转板专门安全要求和试验方法 》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13451-6:2001 Swimming pool equipment Part 6: Additional specific safety requirements and test methods for turning boards The European Standard EN 13451-6:2001 has the status of a British Standard ICS 97.220.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT

2、LAWBS EN 13451-6:2001 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2001 BSI 04-2001 ISBN 0 580 37467 X National foreword This Brit

3、ish Standard is the official English language version of EN 13451-6:2001 The UK participation in its preparation was entrusted by Technical Committee SW/136, Sports and playground equipment, to Subcommittee SW/136/8, Swimming pool equipment, which has the responsibility to: A list of organizations r

4、epresented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Corr

5、espondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does n

6、ot of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promu

7、lgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publicat

8、ion Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN134516 February2001 ICS97.220.10 Englishversion SwimmingpoolequipmentPart6:Additionalspecificsafety requirementsandtestmethodsforturningboards EquipementdepiscinePartie6:Exigencesdescuritet mthodesdessaicomplmentairesspcifiqu

9、esaux plaquesdetouche SchwimmbadgerteTeil6:Zustzlichebesondere sicherheitstechnischeAnforderungenundPrfverfahrenfr Anschlagplatten ThisEuropeanStandardwasapprovedbyCENon13January2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Sta

10、ndardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytr

11、a nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Po

12、rtugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN134516:20

13、01EPage2 EN134516:2001 Contents Page Foreword . 2 1 Scope 3 2 Normativereferences 3 3 Termsanddefinitions 3 4 Safetyrequirements. 3 4.1Dimensions. 3 Page 4 . 2 S t r u c t u r a l i n t e g r i t y 4 4.3 Permeabilityforwatercirculation. 4 4.4 Topandsideedges. 4 4.5 Openingsforlanelines 5 5 Testmetho

14、ds. 5 AnnexA (informative)RequirementsofFINA . . 6 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC136“Sports,playgroundandother recreationalequipment“,thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentica

15、ltextor byendorsement,atthelatestbyAugust2001,andconflictingnationalstandardsshallbewithdrawnatthelatestby August2001. TheEuropeanStandardEN13451“Swimmingpoolequipment“consistsof Part1:Generalsafetyrequirementsandtestmethods Part2:Additionalspecificsafetyrequirementsandtestmethodsforladders,stepladd

16、ersandhandlebends Part3:Additionalspecificsafetyrequirementsandtestmethodsforequipmentforwatertreatmentpurposes Part4:Additionalspecificsafetyrequirementsandtestmethodsforstartingplatforms Part5.Additionalspecificsafetyrequirementsandtestmethodsforlanelines Part6:Additionalspecificsafetyrequirements

17、andtestmethodsforturningboards Part7:Additionalspecificsafetyrequirementsandtestmethodsforwaterpologoals Part8:Additionalspecificsafetyrequirementsandtestmethodsforleisurewaterfeatures Part9:Safetysigns Part10:Additionalspecificsafetyrequirementsandtestmethodsfordivingplatforms,divingspringboardsand

18、 associatedequipment Part11:Additionalspecificsafetyrequirementsandtestmethodsformoveablepoolfloorsandmoveable bulkheads AnnexAisinformative. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium

19、,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden, SwitzerlandandtheUnitedKingdom.Page3 EN134516:2001 1Scope ThispartofEN13451specifiessafetyrequirementsforturningboardsinadditiontothegeneralsafetyrequirements ofEN134511:2

20、001. TherequirementsofthisspecificstandardtakepriorityoverthoseinEN134511:2001. ThispartofEN13451:2001isapplicabletomanufacturedturningboardsforuseincompetitionandtraining. 2Normativereferences ThisEuropeanStandardincorporates,bydatedorundatedreference,provisionsfromotherpublications.These normative

21、referencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferences,thelatesteditionofthe publicationreferredt

22、oapplies(includingamendments). EN134511:2001 SwimmingpoolequipmentPart1:Generalsafetyrequirementsandtestmethods 3Termsanddefinitions ForthepurposesofthisstandardthetermsanddefinitionsofEN134511:2001andthefollowingapply: 3.1 turningboard: Device,fixedorremovable,fittedtothepoolsurroundtoextendtheheig

23、htoftheendwall,in thesameplane.Forswimmers,itprovidesacleardelineationoftheendofthewalland/orsurfacetotouch.They canbeusedformountingtimingpanels. 4Safetyrequirements 4.1Dimensions Thedimensionsindicatedinthefigures1and2shallbecompliedwith.Thedesignoftheequipmentdoesntneed tocomplywiththeexamplesgiv

24、en. Theturningboardshallextendoverthewholewidthofthelane,inoneormoresections. Turningboardsshallbefittedinthesameplaneasthepoolwall(seefigure2). Theminimumheightoftheturningboardsshallbe300mmmeasuredfromwaterlevel.Page4 EN134516:2001 Dimensionsinmillimeters Key edgesdesignedtobesuitableforgrasping 1

25、Turningboardwithexamplesofopeningsforpermeability 2Poolwall 3Waterlevel lLanewidth Figure1:FrontviewofaturningboardExampleofinstallationoveraZurichoverflowchannel NOTE:Dimensionalrequirementsforcompetitiveuse,stipulatedbythegoverningbodyFINA(Fdration InternationaledeNatationAmateur),aregiveninannexA

26、forinformation. 4.2Structuralintegrity Turningboardsshallbedesignedtowithstandahorizontalload,equivalentto100%oftheverticalloadstatedin annexAofEN134511:2001,appliedat90tothepanels,ineitherdirectionandparalleltothewatersurface. 4.3Permeabilityforwatercirculation Turningboardsshallbedesignedtoallowth

27、epassageofwaterforwatertreatmentpurposes,foraheight 100mm intheirlowerpart(seefigure2). 4.4Topandsideedges Thetopandthesideedgesoftheturningboardsshallbedesignedtobesuitableforgraspingwithathickness between25mmand50mm(seefigure1).Page5 EN134516:2001 Dimensionsinmillimetres Key 1Waterlevel a)Finnisho

28、verflow b)Zurichoverflowchannel c)St.Moritzoverflow Figure2:Examplesofinstallationofturningboardsontodifferentoverflowtypes 4.5Openingsforlanelines Anyopeningprovidedforthepassageoflanelines,exceeding8mminonedimension,shallbefittedwithaclosing device,topreventtheriskofentrapment. 5Testmethods Thereq

29、uirementsofclause4shallbeverifiedbythemostappropriatemethod: measurement,visualexaminationorpracticaltests.Page6 EN134516:2001 AnnexA (informative) RequirementsofFINA Guttersmaybeplacedonallfourwallsofthepool.Ifendwallguttersareinstalled,theymustallowforattachment oftouchpanelstotherequired0,3mabove

30、thewatersurface.Theymustbecoveredwithasuitablegrillorscreen.blankBS EN 13451-6:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the i

31、nternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and service

32、s. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an indivi

33、dual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards a

34、re also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of inf

35、ormation on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020

36、 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BS

37、I is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be

38、 reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and

39、size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.