BS EN 13402-3-2013 Size designation of clothes Body measurements and intervals《服装型号的名称与符号 身体测量和间距》.pdf

《BS EN 13402-3-2013 Size designation of clothes Body measurements and intervals《服装型号的名称与符号 身体测量和间距》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13402-3-2013 Size designation of clothes Body measurements and intervals《服装型号的名称与符号 身体测量和间距》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13402-3:2013Size designation of clothesPart 3: Body measurements and intervalsCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013 BR

2、ITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13402-3:2013. It supersedes BS EN 13402-3:2004 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/66, Apparel and interior textiles.A list of organizations represented

3、 on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 7674

4、1 8ICS 61.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2013.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dCopyright

5、European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13402-3 October 2013 ICS 61.020 Supersedes EN 13402-3:2004English Ver

6、sion Size designation of clothes - Part 3: Body measurements and intervals Dsignation des tailles de vtements - Partie 3: Mesures et intervalles Grenbezeichnung von Bekleidung - Teil 3: Krpermae und Sprungwerte This European Standard was approved by CEN on 12 July 2013. CEN members are bound to comp

7、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

8、 Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sa

9、me status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

10、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 20

11、13 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13402-3:2013: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS

12、-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Measurements and intervals 7 5 The letter codes 42 Annex A (informative) Examples of labelling clothing with the standard pictogram 44 Bibliography . 46 Tables Table

13、1 Heights for men 7 Table 2 Alternative of ranges for heights for men with 8 cm intervals .7 Table 3 Example of height range for men 8 Table 4 Chest and waist measurements for men garments for upper body 10 Table 5 Examples for flexible use of measurements . 11 Table 6 Neck girth and chest measureme

14、nt for men garments for upper body 12 Table 7 Arm length in correlation to chest and body height for men 14 Table 8 Waist and hip girth measurements for men garments for lower body . 15 Table 9 Foot lengths for socks for men 16 Table 10 Hand girths for gloves for men 16 Table 11 Head girths for head

15、wear for men . 16 Table 12 Heights for women . 17 Table 13 Alternative of ranges for heights for women with 8 cm intervals. 17 Table 14 Example of height range for women 18 Table 15 Bust and hip girth measurements for women garments for upper body . 19 Table 16 Bust and waist girth measurements for

16、women garments for upper body 20 Table 17 Waist and hip girth measurements for women garments for lower body 21 Table 18 Examples for flexible use of measurements. 22 Table 19 Examples for flexible use of measurements. 22 Table 20 Examples for flexible use of measurements. 23 Table 21 Ranges for bra

17、s, corsetry and swimwear with cups with intervals of 5 cm 25 Table 22 Waist measurements for panty girdle for women 26 Table 23 Foot lengths for socks for women . 26 Table 24 Hand girths for gloves for women . 26 Copyright European Committee for Standardization Provided by IHS under license with CEN

18、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 3 Table 25 Head girths for headwear for women . 27 Table 26 Weights for pantyhose for women 27 Table 27 Example of height range for boys, girls and infants. 28 Table 28 Chest rela

19、ted to body height boys. 29 Table 29 Waist related to body height boys . 30 Table 30 Examples for flexible use of measurements . 31 Table 31 Neck girth and arm length in correlation to body height boys . 32 Table 32 Bust girth related to body height girls 33 Table 33 Waist girth related to body heig

20、ht girls . 34 Table 34 Chest related to body height infant boys 35 Table 35 Waist related to body height infant boys 36 Table 36 Neck girth and arm length related to body height infant boys . 37 Table 37 Bust girth related to body height infant girls . 38 Table 38 Waist girth related to body height

21、infant girls 39 Table 39 Foot lengths for socks for boys, girls and infants 40 Table 40 Hand girths for gloves for boys, girls and infants 41 Table 41 Head girths for headwear for boys, girls and infants . 41 Table 42 Letter code for men 42 Table 43 Letter code for women . 43 Copyright European Comm

22、ittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 4 Foreword This document (EN 13402-3:2013) has been prepared by Technical Committee CEN/TC 248 “Textiles and textil

23、e products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the latest by April 2014.

24、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13402-3:2004. Within the revised version, the values and

25、intervals are adjusted to current sizing surveys carried out in the Netherlands, France, Sweden, Germany and Romania. EN 13402, Size designation of clothes, consists of the following parts: Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981 modified); Part 2: Primary and second

26、ary dimensions; Part 3: Body measurements and intervals (the present document); Part 4: Coding system1). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croat

27、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and th

28、e United Kingdom. 1) In preparation. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 5 Introduction In order to size mass-produced clothes,

29、the body size of the intended wearer has to be defined and identified with the nearest size on a table of standard sizes. In this system, the body size is defined by scales of the appropriate primary and, where necessary, secondary dimensions, using preferred numbers. A good degree of standardizatio

30、n is achieved by the establishment of open-ended size scales with fixed intervals in at least the primary dimension for each garment type. Where body shape is characterised by a number of girth dimensions and height, the primary dimension is placed on a size table, while the secondary dimensions are

31、 variables. The nearest whole number in the tables for that dimension is used for purposes of size designation. The tables of measures as described in this document constitute a first attempt at the grouping of body sizes appropriate to the European population. Body measurement tables are readily co

32、mpiled from this information. It is necessary to use an open system with inbuilt flexibility, because body shape and proportions for any one population group varies. As the results of the sizing surveys of the different countries vary, the tables in this document provide the required flexibility. Co

33、pyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 6 1 Scope This European Standard establishes tables for body measurements and intervals to be

34、used for compiling standard garment sizes for men, women, boys, girls and infants. Garment dimensions are not contained in this document. Examples of labelling clothing with the standard pictogram (see EN 13402-1) are given in Annex A (informative) in this document. 2 Normative references The follow

35、ing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13402-2, Size

36、designation of clothes Part 2: Primary and secondary dimensions 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 drop difference between chest girth and waist girth for men in centimetres, expressed with a negative value when the waist is smal

37、ler than the chest Note 1 to entry: For a chest of 100 cm with a waist of 88 cm, the drop is -12. 3.2 primary dimension body measurement, in centimetres, that is used to designate the size of a garment for the consumer SOURCE: EN 13402-1:2001, 3.1, modified 3.3 secondary dimension body measurement,

38、in centimetres, or in the case of pantyhose, body mass (kg) that may additionally be used in designating the size of a garment for the consumer SOURCE: EN 13402-1:2001, 3.2, modified 3.4 cup size difference between the underbust girth and the bust girth 3.5 standard pictogram pictorial symbol used t

39、o indicate the position on the body of the relevant dimensions SOURCE: EN 13402-1:2001, 3.3 3.6 interval difference between the values of two adjoining body measurements Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking

40、 permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 7 3.7 range coverage of one size, calculated by using one half plus or half minus the interval 3.8 letter code code which embraces two bust or chest sizes, i.e. two intervals 4 Measurements and intervals 4.1 Men 4.1.1 Gene

41、ral In order to accommodate variations in height by country/company, a system with 4 cm or 8 cm intervals for men is standardized, which means that a country/company may select any height from Tables 1 and 2 with a range that may be extended to the left and right of Tables1 and 2 (see Annex A, Figur

42、e A.1). For special kinds of clothing, e.g. protective clothing, the appropriate size should be indicated by combining several body size ranges. Table 1 Heights for men Dimensions in centimetres Height 156 160 164 168 172 176 180 184 188 192 196 200 204 208 Range 154 158 158 162 162 166 166 170 170

43、174 174 178 178 182 182 186 186 190 190 194 194 198 198 202 202 206 206 210 Intervals 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Table 2 Alternative of ranges for heights for men with 8 cm intervals Dimensions in centimetres Height 160 168 176 184 192 200 208 Range 156 164 164 172 172 180 180 188 188 196 196 204 2

44、04 212 Intervals 8 8 8 8 8 8 8 8 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13402-3:2013EN 13402-3:2013 (E) 8 4.1.2 Intervals Intervals listed in the tables define the

45、 differences between two adjoining body measurements. 4.1.3 Range Range is calculated by using one half plus or half minus the interval from the primary or secondary dimension measurement. If the interval is 1,5 cm or less no range will be shown in the pictogram. All ranges on the pictogram will be

46、rounded down to whole numbers. In case of weights, the range is shown in whole numbers. EXAMPLE For a height of 156 cm the range is 154 cm to 158 cm (see Table 3). Table 3 Example of height range for men Height 156 Range 154 158 Interval 4 4 4.1.4 Flexible link between chest/waist and waist/hip meas

47、urements for men 4.1.4.1 General The standard sizing system allows each country/company freely to combine chest and waist measurements and waist and hip measurement according to its requirements. To attain the required flexibility, correlated to the primary measurements chest or waist, a range of al

48、ternatives are defined which are possible to combine. The alternatives are differentiated by coding with letters: Table 4 provides 14 alternatives named from C to Q (except I and O) for waist; Table 8 provides 8 alternatives named from C to K (except I and O) for waist and hip. The alternatives could for instance be expanded to an alternative A for smaller waists/hips and from K/k to O/o for larger hips. The flexibility of the system allows by combining different hip and waist a