BS EN 13224-2011 Precast concrete products Ribbed floor elements《预制混凝土制品 有筋楼板元件》.pdf

《BS EN 13224-2011 Precast concrete products Ribbed floor elements《预制混凝土制品 有筋楼板元件》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13224-2011 Precast concrete products Ribbed floor elements《预制混凝土制品 有筋楼板元件》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13224:2011Precast concrete products Ribbed floor elementsCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproductio

2、n or networking permitted without license from IHS-,-,-BS EN 13224:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13224:2011. It supersedes BS EN 13224:2004, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o

3、m m i t t e e B / 5 2 4 , P r e c a s t c o n c r e t e p r o d u c t s .A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap

4、plication. The British Standards Institution 2012 ISBN 978 0 580 73138 9 ICS 91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments

5、 issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13224 No

6、vember 2011 ICS 91.100.30 Supersedes EN 13224:2004+A1:2007English Version Precast concrete products - Ribbed floor elements Produits prfabriqus en bton - Elments de plancher nervurs Betonfertigteile - Deckenplatten mit Stegen This European Standard was approved by CEN on 1 October 2011. CEN members

7、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t

8、o the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

9、Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

10、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any f

11、orm and by any means reserved worldwide for CEN national Members. Ref. No. EN 13224:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 2 Con

12、tents Page Foreword 4Introduction .61 Scope 72 Normative references 73 Terms, definitions, and symbols 73.1 Terms and definitions .74 Requirements .84.1 Material requirements .84.2 Production requirements 84.3 Finished product requirements 84.3.1 Geometrical properties .84.3.2 Surface characteristic

13、s 104.3.3 Mechanical resistance 104.3.4 Resistance and reaction to fire . 114.3.5 Acoustic properties 114.3.6 Thermal properties . 114.3.7 Durability . 114.3.8 Other requirements. 115 Test methods . 125.1 General . 125.2 Tests on concrete . 125.3 Measuring of dimensions and surface characteristics 1

14、26 Evaluation of conformity 126.1 General . 126.2 Type testing . 126.3 Factory production control 126.4 Finished products . 127 Marking and labelling . 138 Technical documentation 13Annex A (informative) Examples of elements . 14Annex B (normative) Minor floor elements 16B.1 General . 16B.2 Addition

15、al requirements for minor floor elements 16B.2.1 General . 16B.2.2 Dimensions 16B.2.3 Minimum strength of concrete 17B.3 Special rules for minor floor elements . 17B.3.1 Bearing length . 17B.3.2 Transverse load distribution . 18B.3.3 Detailing . 18Annex C (informative) Unintended negative moments .

16、20Annex D (informative) Thermal maps . 23Annex E (informative) Transverse load distribution . 27Annex F (informative) Diaphragm action . 28Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from

17、 IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 3 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 29ZA.1 Scope and relevant characteristics . 29ZA.2 Procedure for attestation of conformity of precast ribbed floor elements . 31

18、ZA.2.1 System of attestation of conformity 31ZA.2.2 EC Certificate and Declaration of conformity . 32ZA.3 CE marking and labelling 33ZA.3.1 General . 33ZA.3.2 Declaration of geometrical data and material properties (method 1) 35ZA.3.3 Declaration of product properties (method 2) 37ZA.3.4 Declaration

19、 of compliance with a given design specification provided by the client (method 3a) 39ZA.3.5 Declaration of compliance with a given design specification provided by the manufacturer according to the clients order (method 3b) . 41Bibliography 43Copyright European Committee for Standardization Provide

20、d by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 4 Foreword This document (EN 13224:2011) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is he

21、ld by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the possibility tha

22、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13224:2004+A1:2007. Significant technical changes compared to the previous version are: a) change i

23、n the scope to also cover elements with bottom slab (as shown in Annex A); b) deletion of the requirement on planarity (in 4.3.1.1 and 5.2); c) deletion of the requirement on camber or sag (in 4.3.1.1 and 5.2); d) addition of a rule for elements without shear reinforcement in 4.3.3.3; e) adoption of

24、 the new template for Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Construction Products Directive (89/106/EEC) of the European Union (EU). For relationship with E

25、U Directive(s), see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects, reference is made to EN 13369: Common rules for precast products, from which also the relevant requirements o

26、f the EN 206-1: Concrete Part 1: Specification, performances, production and conformity are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design a

27、spects. The installation of some structural precast concrete products is dealt with by EN 13670:2009 Execution of concrete structures. In all countries it can be accompanied by alternatives for national application. The programme of standards for structural precast concrete products comprises the fo

28、llowing standards, in some cases consisting of several parts: EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation piles EN 12843, Precast concrete products Masts and poles Copyright European Committee for Standardization Provided by IHS under license w

29、ith CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 5 EN 13224, Precast concrete products Ribbed floor elements EN 13225, Precast concrete products Linear structural elements EN 13693, Precast concrete products Special roof elem

30、ents EN 13747, Precast concrete products Floor plates for floor systems EN 13978, Precast concrete products Precast concrete garages EN 14843, Precast concrete products Stairs EN 14844, Precast concrete products Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast c

31、oncrete products Wall elements EN 15037, Precast concrete products Beams for beam-and-block floor systems This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1 and EN 1992-1-2). Where, in default of applicability con

32、ditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN/CENELEC Internal Regulations, the national standards

33、 organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan

34、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 6 I

35、ntroduction The evaluation of conformity given in this standard refers to the completed precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules and resistance to fire, reference is made to EN 1992-1-1 and EN 1992-1-2. Ad

36、ditional complementary rules are provided where necessary. 4.3.3 and 4.3.4 include specific provisions resulting from the application of EN 1992-1-1, and EN 1992-1-2 rules made specific for the concerned product. The use of these provisions is consistent with a design of works made with EN 1992-1-1

37、and EN 1992-1-2. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 7 1 Scope This document identifies the requirements, the basic performance crit

38、eria and evaluation of conformity for precast ribbed elements made of reinforced or prestressed normal weight concrete, used in floors or roofs. The elements consist of a top and/or bottom slab and one or more (usually two) ribs; transverse ribs may also be present. Some examples of precast elements

39、 considered in this document are shown in Annex A. Specific requirements for minor floor elements are listed in Annex B. This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods and aspects of transport and erection. This document does not cover

40、load-bearing capacity determined by testing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

41、endments) applies. EN 1990:2002, Eurocode: Basis of structural design EN 1991-1-6:2005, Eurocode 1 Actions on structures Part 1-6: General actions Actions during execution EN 1992-1-1:2004, Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 1992-1-2:2004, Eu

42、rocode 2: Design of concrete structures Part 1-2: General rules Structural fire design EN 13369:2004, Common rules for precast concrete products 3 Terms, definitions, and symbols 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1992-1-1:2004 and EN 1

43、3369:2004 and the following apply. 3.1.1 ribbed precast concrete element precast unit consisting in a slab stiffened by one or more ribs 3.1.2 minor floor element ribbed precast floor elements having limited dimensions, which are in compliance with Annex B Copyright European Committee for Standardiz

44、ation Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 8 4 Requirements 4.1 Material requirements For general aspects, reinforcing and prestressing steel, inserts and connectors, the relevant su

45、bclauses of EN 13369:2004, 4.1 shall apply. For constituent materials of concrete EN 206-1 applies. In particular, the ultimate tensile and tensile yield strength of steel shall be considered. 4.2 Production requirements The production of precast ribbed elements shall comply with the requirements in

46、 EN 13369:2004, 4.2. NOTE In addition to EN 13369:2004, 4.2.2 for cast-in-situ concrete considered to act compositely with precast units in the structural resistance (e.g. structural top layer), the minimum strength class is C 20/25. In particular, the compressive strength of concrete shall be consi

47、dered. For minor floor elements, strength classes shall comply with B.2.3. 4.3 Finished product requirements 4.3.1 Geometrical properties 4.3.1.1 Production tolerances Complementary to EN 13369:2004, 4.3.1.1 the following tolerances shall apply (Figure 1). Copyright European Committee for Standardiz

48、ation Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13224:2011EN 13224:2011 (E) 9 Figure 1 Reference points for standard check of tolerances DIMENSION PERMITTED DEVIATION (mm) Skewness () 15 Lateral bow ( ) 10 or L/1 000 (whichever is greater) Angular deviation of ribs () 15 Methods of measurements are given in 5.3. F