BS EN 13172-2012 Thermal insulation products Evaluation of conformity《隔热产品 合规评估》.pdf

《BS EN 13172-2012 Thermal insulation products Evaluation of conformity《隔热产品 合规评估》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13172-2012 Thermal insulation products Evaluation of conformity《隔热产品 合规评估》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13172:2012Thermal insulation products Evaluation of conformityBS EN 13172:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13172:2

2、012. It supersedes BS EN 13172:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This

3、publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 ISBN 978 0 580 70537 3 ICS 91.100.60 Compliance with a British Standard cannot confer immunity from legal obligations.This Bri

4、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2012.Amendments issued since publicationDate Text affectedBS EN 13172:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13172 January 2012 ICS 91.100.60 Supersedes EN 13172:2008Englis

5、h Version Thermal insulation products - Evaluation of conformity Produits isolants thermiques - valuation de la conformit Wrmedmmstoffe - Konformittsbewertung This European Standard was approved by CEN on 9 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whic

6、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eur

7、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members a

8、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed

9、en, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national M

10、embers. Ref. No. EN 13172:2012: EBS EN 13172:2012EN 13172:2012 (E) 2 Contents Page Foreword 4g31 Scope 6g32 Normative references 6g33 Terms and definitions .6g34 General requirements 7g35 Requirements for factory production control - Tasks for the manufacturer .8g35.1 General 8g35.2 Organisation .8g

11、35.2.1 General 8g35.2.2 Responsibility and authority 8g35.2.3 Management representative for factory production control .8g35.2.4 Management review .8g35.3 Quality manual .8g35.4 Inspection and testing .9g35.4.1 General 9g35.4.2 Test equipment 9g35.4.3 Inspection and testing of raw materials and othe

12、r constituent materials 10g35.4.4 Inspection and testing during manufacture . 11g35.4.5 Product testing 11g35.4.6 Inspection and test status . 13g35.4.7 Inspection and test records (manufacturers log) . 13g35.5 Actions in the case of nonconforming products . 13g35.6 Handling, storage, packaging, and

13、 marking of products . 13g35.7 Traceability of products . 14g35.8 Training of personnel . 14g36 Initial type testing . 14g3Annex A (informative) Certification of conformity (not for CE marking purposes) . 15g3A.1 Bodies involved in the evaluation of conformity procedure 15g3A.2 Tasks for the approve

14、d body . 15g3A.2.1 General . 15g3A.2.2 Initial inspection 15g3A.2.3 Initial type testing . 15g3A.2.4 Continuous surveillance 16g3A.3 Conformity mark . 20g3A.3.1 General . 20g3A.3.2 Certificate of conformity 20g3A.3.3 Withdrawal of certificate 20g3Annex B (informative) Certification of conformity (fo

15、r products of reaction to fire classes under system 1 22g3B.1 Bodies involved in the evaluation of conformity procedure 22g3B.2 Tasks for the approved body . 22g3B.2.1 General . 22g3B.2.2 Initial inspection of factory and factory production control 22g3B.2.3 Initial type testing . 23g3B.2.4 Continuo

16、us surveillance, assessment and approval of the factory production control . 23g3B.3 Conformity mark . 25g3B.3.1 General . 25g3B.3.2 Certificate of conformity 25g3BS EN 13172:2012EN 13172:2012 (E) 3 B.3.3 Withdrawal of certificate . 25g3Annex C (informative) Declaration of conformity by the manufact

17、urer (for the performance requirements under system 3 ) 26g3C.1 Bodies involved in the evaluation of conformity procedure. 26g3C.2 Tasks for the approved body . 26g3C.2.1 General . 26g3C.2.2 Initial type testing 26g3C.3 Conformity mark 27g3C.3.1 General . 27g3C.3.2 Declaration of conformity . 27g3An

18、nex D (informative) Declaration of conformity by the manufacturer (for products of reaction to fire classes under system 4 ) . 28g3D.1 Conformity mark 28g3Annex E (informative) Guidance on the use of annex(es) 29g3E.1 CE marking . 29g3E.2 Voluntary product certification 30g3E.3 Overview of the eleme

19、nts of the evaluation of conformity systems 30g3Annex F (informative) Criteria for assessing non-conformity Procedures in case of a complaint . 31g3F.1 Complaint on the product declaration 31g3F.1.1 General . 31g3F.1.2 Complaint on the declared thermal resistance or thermal conductivity . 31g3F.1.3

20、Complaint on other characteristics . 32g3F.2 Complaint on a lot . 32g3Bibliography 33g3BS EN 13172:2012EN 13172:2012 (E) 4 Foreword This document (EN 13172:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. T

21、his European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the e

22、lements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13172:2008. This document has been prepared under a mandate given to CEN by the European Commission and the Europe

23、an Free Trade Association The main changes to EN 13172:2008 are: a) Clause 5.4.2 text has been reorganised and reworded to distinguish clearly between calibration (check of calibration) and internal checks on equipment; b) Clause 5.4.5 text has been reworded to distinguish clearly between ITT and FP

24、C. Also the use of statistics to reduce testing frequencies in case of “safe“ values has been extended to other characteristics than dimensions; c) Table A.1 has been divided into two tables, Table A.1 for building insulation products and Table A.2 for building equipment and industrial installations

25、. Some adjustments of testing frequencies for the characteristics in the tables have been introduced. This European Standard contains six informative annexes: Annex A, Certification of conformity (not for CE marking purposes); Annex B, Certification of conformity (for products of reaction to fire cl

26、asses under system 1); Annex C, Declaration of conformity by the manufacturer (for the performance requirements under system 3); Annex D, Declaration of conformity by the manufacturer (for products of reaction to fire classes under system 4); Annex E, Guidance on the use of annex(es); Annex F, Crite

27、ria for assessing non-conformity Procedure in case of a complaint. Evaluation of conformity is necessary for products in order to provide support for CE marking and for voluntary certification. The guidance contained in annex ZA of the product standards will determine which of the above annexes shal

28、l be used for CE marking. Annex E describes how to use the annexes together with the main body of this standard to fulfil the requirements to the certification and/or declaration of conformity for a product. BS EN 13172:2012EN 13172:2012 (E) 5 Although the annexes are informative in this standard, t

29、heir use by the manufacturer will require that they assume a normative status. When an annex is used the requirements in the annex need to be followed, as given in the text. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound t

30、o implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed

31、en, Switzerland, Turkey and the United Kingdom. BS EN 13172:2012EN 13172:2012 (E) 6 1 Scope This European Standard specifies the procedures and the criteria for the evaluation of the conformity of a thermal insulating product with the relevant European product specification. This European Standard a

32、pplies to factory made products for buildings, factory made products for building equipment and industrial installations, in-situ products for buildings, in-situ products for building equipment and industrial installations and to external thermal insulation composite systems. 2 Normative references

33、Not applicable 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 product thermal insulation product produced under conditions which are presumed uniform to a given specification and placed on the market 3.2 factory production control permanent,

34、 internal control of production exercised either by the manufacturer or by his agent on the responsibility of the manufacturer himself NOTE Factory production control comprises operational techniques and all measures necessary to regulate and maintain the conformity of the product to the requirement

35、s of the relevant product standard. 3.3 production line assemblage of equipment that produces products using a continuous process 3.4 production unit assemblage of equipment that produces products using a discontinuous process 3.5 production plant/factory all the production equipment on the same sit

36、e including all production lines and units 3.6 third party approved organisation or body which is able to provide independent verification or approval 3.7 witness testing test performed by the manufacturer at his own facilities monitored by the representative of the third party BS EN 13172:2012EN 13

37、172:2012 (E) 7 4 General requirements The evaluation of conformity involves either a manufacturer or a manufacturer in conjunction with a third party. The procedure is given either in the relevant product standard or agreed between parties; it shall include at least those tasks given in Clause 5. Th

38、e tasks for the third party and/or the manufacturer shall be carried out in accordance with the requirements of Clause 7 of the product standard, which makes reference to this standard and one or more of the annexes B, C, or D for the purposes of CE marking. NOTE 1 Annex A is included for the purpos

39、es of voluntary product certification. NOTE 2 Annex F is included for the purposes of describing how to handle the case of a complaint (outside the scope of a voluntary certification, in which case the annex A rules apply). The content of Clause 5 will also be met by supplementing the provisions of

40、EN ISO 9001 with requirements of this standard. For ITT and FPC, each production line is considered separately. For ITT and FPC, production units using the same process in one factory are considered together (as if one production line). Products may be collected into product groups for declaration a

41、nd testing purposes subject to the following conditions: They shall have the same type of production process and shall be derived from the same family of raw material; a distinction is made between glass wool and rock wool and between foams with different blowing agents. They shall differ only in as

42、pects that do not influence the properties required in the relevant product standard. They shall be covered by a single thermal insulation standard, e.g. from the series EN 13162 to EN 13171. Products which differ only with regard to some properties may be grouped together by their common properties

43、. Products which are identical except the facing and for which the different facings have been shown to have the same effect on the declared characteristics (e.g. regarding thermal properties, the gas tight facings of some PU products), may be grouped. Products covered by more than one European Stan

44、dard may be grouped for testing purposes only providing that, They have a common production specification and that they are from the same type of production process and the same family of raw material, e.g. cellular glass for the EN 13167 and EN 14305. The properties outside this (these) common grou

45、p(s) shall be tested product by product. Products which are outside the scope of a product standard cannot be grouped for declaration purposes with products declared under the scope of that standard. Providing that a product within the group meets the requirements of the product standard then all pr

46、oducts within the same group shall be deemed to comply with the product standard for the properties concerned. If the same product fails to comply with the product standard then the whole group shall be assumed to have failed to comply with the product standard. BS EN 13172:2012EN 13172:2012 (E) 8 5

47、 Requirements for factory production control - Tasks for the manufacturer 5.1 General This clause specifies the requirements for factory production control that shall be fulfilled by the manufacturer for each factory 5.2 Organisation 5.2.1 General Factory production control shall be operated accordi

48、ng to a documented system that shall be given in a quality manual. 5.2.2 Responsibility and authority The responsibility, authority and the interrelationships between all personnel who manage, perform, or verify work affecting quality, shall be defined. This applies particularly to personnel who nee

49、d the organisational freedom and authority to a) initiate action to prevent the occurrence of product non-conformity; b) identify and record any product quality problems. 5.2.3 Management representative for factory production control At every place of production, a representative, with the appropriate knowledge and production experience, shall be appointed by the manufacturer and given responsibility for managing and supervising factory production control procedures and for ensuring that the requirements of this standard are implemented and main