BS EN 13170-2012 Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification《建筑用隔热产品 工厂制造膨胀软木(ICB)产品 规范》.pdf

《BS EN 13170-2012 Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification《建筑用隔热产品 工厂制造膨胀软木(ICB)产品 规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13170-2012 Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification《建筑用隔热产品 工厂制造膨胀软木(ICB)产品 规范》.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13170:2012Thermal insulation productsfor buildings Factory madeproducts of expanded cork(ICB) SpecificationCopyright European Committee for Standardization Provided by IHS

2、under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13170:2012. It supersedes BS EN 13170:2008, which is withdrawn.The UK participation in its p

3、reparation was entrusted to T e c h n i c a l C o m m i t t e e B / 5 4 0 / 6 , F i b r o u s a n d i n o r g a n i c t h e r m a l insulation materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all

4、the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69985 6 ICS 79.100; 91.100.60 Compliance with a British Standard cannot confer immunityfrom legal obligations.This

5、 British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction o

6、r networking permitted without license from IHS-,-,-BS EN 13170:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13170 November 2012 ICS 91.100.60 Supersedes EN 13170:2008English Version Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification

7、Produits isolants thermiques pour le btiment - Produits manufacturs en lige expans (ICB) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus expandiertem Kork (ICB) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply wi

8、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

9、gement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same st

10、atus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

11、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights

12、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13170:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:20

13、12EN 13170:2012 (E) 2 Contents Page Foreword 41 Scope 62 Normative references 63 Terms, definitions, symbols, units and abbreviated terms .84 Requirements 115 Test methods . 186 Designation code 217 Evaluation of conformity 228 Marking and labelling . 23Annex A (normative) Determination of the decla

14、red values of thermal resistance and thermal conductivity . 24Annex B (normative) Initial type testing (ITT) and factory production control (FPC) . 27Annex C (normative) Multi layered insulation products (insulation cork board) 31Annex D (normative) Determination of the thermal conductivity in relat

15、ion to moisture content 33Annex E (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 35Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products D

16、irective . 38Bibliography . 47Tables Table 1 Classes for length tolerances . 12Table 2 Classes for width tolerances 12Table 3 Classes for thickness tolerances . 12Table 4 Levels for bending strength 14Table 5 Dimensional stability under specified temperature and humidity conditions . 14Table 6 Level

17、s for compressive stress at 10 % deformation 14Table 7 Levels for tensile strength perpendicular to faces 15Table 8 Levels for compressibility . 16Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % 25Table B.1 Minimum number of tests for ITT and minimum prod

18、uct testing frequencies 27Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 29Table E.1 test results 35Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license f

19、rom IHS-,-,-BS EN 13170:2012EN 13170:2012 (E) 3 Table E.2 R test results 36Table ZA.1 Relevant clauses for Expanded Cork and intended use . 39Table ZA.2 Systems of attestation of conformity . 41Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire a

20、nd system 3 for other characteristics 42Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire . 43Figures Figure D.1 Example of a graphic representation of “a” 34Figure ZA.1 Example CE marking information 46Copyrig

21、ht European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:2012EN 13170:2012 (E) 4 Foreword This document (EN 13170:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal in

22、sulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the la

23、test by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13170:2008. This document has been prepa

24、red under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Compared with EN 13170:2008, the m

25、ain changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some s

26、pecific items such as for ICB; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. This standard is one of a series of standards for insulation products used in buildings, but m

27、ay be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a “package” of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made

28、 thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification

29、EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification Copyright European Committee for Standardization Provided by IH

30、S under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:2012EN 13170:2012 (E) 5 EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for building

31、s Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insu

32、lation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reductions in energy used and emissions produced during the installed life of insulation products excee

33、ds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Cz

34、ech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingd

35、om. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:2012EN 13170:2012 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of exp

36、anded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and are delivered as boards with or without facings or coatings. Products covered by this standard are also used in prefabricated thermal insulation

37、systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given pro

38、perty to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W, or a declared thermal conducti

39、vity greater than 0,060 W/(mK), at 10 C, are not covered by this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For un

40、dated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal

41、 insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products

42、 for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applicati

43、ons Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building app

44、lications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 120

45、86, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12089, Thermal insulating products for building applications Determination of bending behaviour Copyright European Committee for Standardization Provided by IHS under license with CENNo

46、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13170:2012EN 13170:2012 (E) 7 EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12105, Resilient floor coverings Determination of moisture content of agglomerated

47、composition cork EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulation products EN 12667, Thermal performance of building mat

48、erials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products Evaluation of conformity EN 13501-1, Fi