BS EN 13126-6-2008 Building hardware - Requirements and test methods for windows and doors height windows - Variable geometry stay hinges (with or without a friction stay)《建筑五金件 窗户.pdf

《BS EN 13126-6-2008 Building hardware - Requirements and test methods for windows and doors height windows - Variable geometry stay hinges (with or without a friction stay)《建筑五金件 窗户.pdf》由会员分享，可在线阅读，更多相关《BS EN 13126-6-2008 Building hardware - Requirements and test methods for windows and doors height windows - Variable geometry stay hinges (with or without a friction stay)《建筑五金件 窗户.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN13126-6:2008ICS 91.190NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDBuilding hardware Requirements andtest methods forwindows and doorsheight windowsPart 6: Variable geometry stay hinges(with or without a friction stay)Licensed Copy: Wang Bin, ISO/EXCHANG

2、E CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 58563 0Amendments/corrigenda issued since publicationDate CommentsBS EN 13126-6:2008National forewo

3、rdThis British Standard is the UK implementation of . It supersedes DDCEN/TS 13126-6:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/538/4, Building hardware.A list of organizations represented on this committee can be obtained onrequest to its s

4、ecretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EN 13126-6:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/

5、07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13126-6November 2008ICS 91.190 Supersedes CEN/TS 13126-6:2004 English VersionBuilding hardware - Requirements and test methods for windowsand doors height windows - Part 6: Variable geometry

6、stayhinges (with or without a friction stay)Quincaillerie pour le btiment - Exigences et mthodesdessai des ferrures de fentres et portes-fentres - Partie6: Compas friction gomtrie variable (avec ou sanssystme de friction)Baubeschlage - Beschlge fr Fenster und Fenstertren -Anforderungen und Prfverfah

7、ren - Teil 6: Scheren mitvernderlicher Geometrie (mit oder ohne Friktionssystem);Deutsche Fassung EN 13126-6:2008This European Standard was approved by CEN on 5 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ

8、eanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English,

9、French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus

10、, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EU

11、ROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13126-6: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/20

12、09 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 2 Contents Page Foreword. 4 1 Scope 6 2 Normative references . 6 3 Terms and definitions. 6 4 Classification. 7 4.1 General. 7 4.2 Category of use (1 first digit) 7 4.3 Durability (2 second digit). 7 4.4 Mass (3 third digit) .

13、 7 4.5 Fire resistance (4 fourth digit) 7 4.6 Safety in use (5 fifth digit) . 7 4.7 Corrosion resistance (6 sixth digit) 8 4.8 Security (7 seventh digit) 8 4.9 Application (8 eighth digit) 8 4.10 Test sizes size limitations (9 ninth digit) 8 4.11 Example of classification for variable geometry stay

14、hinges (with or without a friction system EN 13126-6) 9 5 Requirements 10 5.1 General. 10 5.2 Integrated restrictors 10 5.3 Additional requirements. 10 5.3.1 Pull-in and pull-in abuse test . 10 5.3.2 Friction test (where applicable) . 10 5.3.3 Obstructed track test 11 5.3.4 Ease of sash movement tes

15、t 11 5.3.5 Durability test 11 5.3.6 Durability pull-in test 12 5.3.7 Simulated negative pressure test 12 5.3.8 Static load test. 13 5.3.9 Additional load test. 13 6 Test apparatus. 13 6.1 General. 13 6.2 Assembly . 13 6.2.1 General. 13 6.2.2 Fixing 13 6.3 Additional equipment . 14 6.3.1 Block for pu

16、ll-in abuse test 14 6.3.2 Steel cross for simulated negative pressure test 14 7 Test methods. 14 7.1 Samples . 14 7.2 Pull-in test 14 7.2.1 General. 14 7.2.2 Pull-in test procedure . 14 7.3 Friction test 15 7.3.1 General. 15 7.3.2 Friction test procedure. 15 7.4 Obstructed track test procedure . 15

17、7.5 Pull-in abuse test 16 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 3 7.6 Ease of sash movement test procedure. 16 7.7 Durability test 16 7.7.1 General. 16 7.7.2 Durability pull-in test procedure 17 7.8 Si

18、mulated negative pressure test 17 7.9 Static load test procedure 18 7.10 Additional load test procedure 18 7.11 Corrosion resistance 18 Annex A (normative) Types of variable geometry stay hinges (with or without a friction system). 19 Annex B (informative) Test method diagrams. 20 Annex C (normative

19、) Flow chart of test procedures. 25 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 4 Foreword This document (EN 13126-6:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, buildi

20、ng hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the

21、latest by May 2009. This document supersedes CEN/TS 13126-6:2004. This European Standard is one of a series of European Standards dedicated to building hardware products. A full contribution to the preparation of this European Standard has been made by the European manufacturers organization “ARGE”

22、and national standards bodies. EN 13126 Building hardware Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: Casement fastener handles1)Part 3: Manoeuvring fittings for espagnolette bolts/sl

23、iding button1)Part 4: Espagnolette bolts1)Part 5: Devices that restrict the opening of windows1)Part 6: Variable geometry stay hinges (with or without a friction system) Part 7: Finger catches Part 8: Tilt the point about which the casement pivots being near the outer end of a link arm. The freedom

24、of movement of the variable geometry stay hinge system is controlled by the friction between some or all of its moveable components NOTE Friction is usually applied either at the pivot points or between a sliding shoe and its track. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 0

25、7:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 7 3.2 working stack height perpendicular distance between the outer faces of the frame plate and casement plate of a variable geometry stay hinge (with or without a friction system) 3.3 pull-in characteristic of the design of the

26、variable geometry stay hinge (with or without a friction system), which maintains the non-locking edge of a casement in contact with the window frame or weather stripping when the casement fastener is closed 3.4 integrated restrictor mechanism that is an integral part of the variable geometry stay h

27、inge (with or without a friction system) that limits the initial opening of the window 3.5 declared minimum opening distance measured between the nearest adjacent edges of the sash and frame as the outward movement, from fully closed to where the friction in a variable geometry stay hinge with a fri

28、ction system is sufficient to conform to the requirements of 7.3 4 Classification 4.1 General The classification for variable geometry stay hinge (with or without a friction system) shall be in accordance with the requirements of EN 13126-1:2006, Clause 4. 4.2 Category of use (1 first digit) No mark

29、ing is required for the category of use in accordance with EN 13126-1:2006, 4.2. 4.3 Durability (2 second digit) Grades shall be in accordance with EN 13126-1:2006, 4.3. 4.4 Mass (3 third digit) Grades shall be in accordance with EN 13126-1:2006, 4.4. 4.5 Fire resistance (4 fourth digit) One grade s

30、hall be identified in accordance with EN 13126-1:2006, 4.5. grade 0: no requirements. 4.6 Safety in use (5 fifth digit) One grade shall be identified in accordance with EN 13126-1:2006, 4.6. grade 1: hardware shall conform to the requirements of EN 13126-1 and EN 13126-6. Licensed Copy: Wang Bin, IS

31、O/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 8 4.7 Corrosion resistance (6 sixth digit) Grades shall be in accordance with EN 13126-1:2006, 4.7. 4.8 Security (7 seventh digit) No marking is required for the category of security in acco

32、rdance with EN 13126-1:2006, 4.8. 4.9 Application (8 eighth digit) The eighth digit shows “6/1”, “6/2” or “6/3” indicating the part of the standard which was used for testing the variable geometry stay hinges (with or without a friction system) and their common application to the following window as

33、semblies in accordance with EN 13126-1:2006, 4.9. Three grades are identified: grade 6/1: indicating window operates on a horizontal axis of rotation: type C: bottom-hung window, inward opening or outward opening; type D: top-hung window, inward opening or outward opening; type H: projecting top-hun

34、g window, inward or outward opening; type J: projecting bottom-hung window, inward or outward opening; type U: top-hung, inward opening window multi-light; type V: bottom-hung, inward opening window multi-light; grade 6/2: indicating window operates on a vertical axis of rotation: type A: side-hung

35、window inward opening; type B: side-hung window outward opening; grade 6/3: indicating the window operates on both horizontal and vertical axis of rotation. 4.10 Test sizes size limitations (9 ninth digit) The ninth digit shows the test sizes in accordance with EN 13126-1:2006, 4.10 as follows: S.W.

36、2)in mm / S.H.3)in mm tolerance of -2 mm/+0 mm EXAMPLE 1 200 S.W. 900 S.H. Where a variable geometry stay hinge (with or without friction) operates on a horizontal axis of rotation, the test size is determined in accordance with Table 1. Where a variable geometry stay hinge (with or without friction

37、) operates on a vertical axis of rotation, the test size is determined in accordance with Table 2. 2)S.W. = sash width 3)S.H. = sash height Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 9 Table 1 Test window s

38、ize for top hung variable geometry stay hinges Overall length of variable geometry stay hinge (mm) Sash width (mm) Sash height (mm) 30 kg 1 500 N 500+N On completion of the simulated negative pressure test in accordance with 7.8: recorded additional displacement of the datum surfaces shall be a maxi

39、mum of 1,5 mm. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 13 5.3.8 Static load test The test specified in 7.9 shall be used only on side hung windows (type A and type B) to ensure the mechanical strength of

40、 the hardware is appropriate for the intended use. On completion of the static load test in accordance with 7.9: side hung projecting reversible hardware shall continue to function normally; measured clearance gap between sash and frame shall not have increased by more than 3 mm from the measured cl

41、earance gap prior to the test commencing. 5.3.9 Additional load test The test specified in 7.10 shall be used only on side-hung windows (type A and type B) to comply with safety in use, the test specified in 7.10 shall be used. On completion of the additional load test in accordance with 7.10: side-

42、hung projecting reversible hardware shall continue to hold the sash. NOTE Permanent deformation of the hardware is acceptable. 6 Test apparatus 6.1 General The variable geometry stay hinge (with or without a friction system) shall be installed in the test specimen for testing as in EN 13126-1:2006,

43、Clause 6 and in accordance with the manufacturers fixing instructions. The hardware manufacturer shall provide test specimens for the testing institute. A drawing of the profile cross-section with relevant information shall be enclosed in the test application, which also contains the necessary hardw

44、are installation information for the windows. NOTE Purpose-built test steel test apparatus may also be used. Mounting blocks should be used to ensure the fixing gap on the test apparatus is equal to the working stack height of the variable geometry stay hinge (with or without a friction system). 6.2

45、 Assembly 6.2.1 General The test shall be conducted on a test rig which corresponds in function and shape to the window for which the hardware was intended. The hardware tested shall be in accordance with the manufacturers recommendation for size and mass of the test specimen. The test rig shall be

46、provided with adjustable datum surfaces near the free corners of the edge of the casements, opposite to its detected locking rail, so that wear and loss of pull-in can be detected. 6.2.2 Fixing Any gap between sash and outer frame shall be equal to the working stack height of the variable geometry s

47、tay hinge (with or without a friction system) 10+mm. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/07/2009 07:31, Uncontrolled Copy, (c) BSIBS EN 13126-6:2008EN 13126-6:2008 (E) 14 If the fixing position of the variable geometry stay hinge (with or without a friction system) is not speci

48、fied, the variable geometry stay hinge (with or without a friction system) shall be mounted with its centre line in the plane containing the centre of gravity of the sash, or test panel, to 3 mm and as close to its free corners as practicable. 6.3 Additional equipment 6.3.1 Block for pull-in abuse t

49、est The pull-in abuse test requires a softwood block of dimensions (25 mm 25 mm 6 mm) 10 % (see Figure B.3). 6.3.2 Steel cross for simulated negative pressure test The simulated negative pressure test requires a welded steel cross to be used to distribute the applied force to the mid-points of the panel rails and stiles. 7 Test methods 7.1 Samples Four samples shall be used for testing in accordance with this European Standard: sample A pull-in, friction and pull-in ab