BS EN 13044-1-2011 Intermodal loading units Marking Markings for identification《联合运输负载单元 标记 标记识别》.pdf

《BS EN 13044-1-2011 Intermodal loading units Marking Markings for identification《联合运输负载单元 标记 标记识别》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13044-1-2011 Intermodal loading units Marking Markings for identification《联合运输负载单元 标记 标记识别》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13044-1:2011Intermodal Loading Units MarkingPart 1: Markings for identificationBS EN 13044-1:2011Incorporating corrigendum April 2014BS EN 13044-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13044-1:2011, incorporating cor

2、rigendum April 2014. Together with BS EN 13044-2:2011 and BS EN 13044-3:2011, it supersedes BS EN 13044:2001 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TW/1, Freight containers and swap bodies.A list of organizations represented on this committee

3、can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 86839 9ICS 35.240.60;

4、55.180.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2011.Amendments/corrigenda issued since publicationDate Text affected30 June 2014 Implementa

5、tion of CEN corrigendum April 2014: Subclause 5.2.3 (first paragraph) and Clause A.2 (title) updatedBS EN 13044-1:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13044-1 January 2011 ICS 55.180.10; 35.240.60 Supersedes EN 13044:2000English Version Intermodal Loading Units - Marking - Part 1

6、: Markings for identification Units de chargement intermodales - Marquage - Partie 1: Marquages didentification Intermodale Ladeeinheiten - Kennzeichnung - Teil 1: Kennzeichnungen fr die Identifizierung This European Standard was approved by CEN on 30 November 2010. CEN members are bound to comply w

7、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Man

8、agement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same s

9、tatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

10、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means

11、reserved worldwide for CEN national Members. Ref. No. EN 13044-1:2011: EIncorporating corrigendum April 2014BS EN 13044-1:2011EN 13044-1:2011 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 Identification system and its associated marks .64.1

12、 Identification system .64.2 Identification of the owner 64.3 Serial number .74.4 Check digit 75 Physical display of marks .75.1 Size and colour of marks 75.2 Layout and location of marks .75.2.1 General 75.2.2 Layout of marks .75.2.3 Location of marks 7Annex A (normative) Determination of check dig

13、it .9A.1 General 9A.2 Numerical equivalents of ILU identification system, and serial number .9A.3 Weighting factor .9A.4 Modulus 9A.5 Value of check digit 10A.6 Example calculation of the check digit 10Bibliography . 11Numerical equivalents of ILU owner code, and serial number .BS EN 13044-1:2011EN

14、13044-1:2011 (E) 3 Foreword This document (EN 13044-1:2011) has been prepared by Technical Committee CEN/TC 119 “Swap bodies for combined goods transport”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an id

15、entical text or by endorsement, at the latest by July 2011, and conflicting national standards shall be withdrawn at the latest by July 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held res

16、ponsible for identifying any or all such patent rights. This document supersedes EN 13044:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cypru

17、s, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 13044-1:2011EN 13044-1:2011 (E)

18、4 Introduction This European Standard contains the recommended method of marking Intermodal Loading Units (ILU) to meet current and future requirements. The European Standard follows the format used in EN ISO 6346, the world wide accepted standard for marking and coding of marine freight containers.

19、 As the above standard can be applied, without alteration, to an ILU, the standard is not directly interchangeable with the ISO standard. However since the ILU are handled and transported in Europe in the same environment as ISO freight containers, the two standards are compatible. BS EN 13044-1:201

20、1EN 13044-1:2011 (E) 5 1 Scope This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing s

21、ystems), as well as for display on an ILU and other non ISO containers (i.e. which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport. The methods of displaying identification and certain other data (including operational data) on

22、ILUs by means of permanent marks are included. This European Standard specifies: a) an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation; b) a coding system for

23、 data on ILU size and type, with corresponding marks for their display; c) mandatory operational marks; d) physical presentation of the marks on the ILU. This part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its u

24、se. This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN. NOTE Some of the major international conventions whose c

25、ontainer-marking requirements are not covered in this European Standard are as follows: International Convention for Safe Containers (UN/IMO 1992); the CSC convention, of which some approval plates are borne by swap bodies which are not designed for international maritime transport, is likely to evo

26、lve in the near future in a way that its implementation field will be restricted to containers for maritime use for which only the BIC is entrusted with the registration of the owner code (code ISO Alpha and code BIC) in the context of the standard EN ISO 6346; Customs Convention on Containers 1956

27、and 1972; Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975. It should not to be assumed that this list is exhaustive. This European Standard does not cover the display of technical data on Swap tanks (see EN 1432) nor does it, in any way

28、, include identification marks or safety signs for items of cargo which may be carried in ILU. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest ed

29、ition of the referenced document (including any amendments) applies. EN ISO 6346, Freight containers Coding, identification and marking (ISO 6346:1995) BS EN 13044-1:2011EN 13044-1:2011 (E) 6 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 In

30、termodal Loading Unit ILU loading unit suitable for European intermodal transport on road, rail, inland waterway and sea, which is not an ISO-container according to ISO 830 EXAMPLE Among others swap body, semi trailer. 3.2 owner code four-letter code indicating the owner or the principal operator 4

31、Identification system and its associated marks 4.1 Identification system The identification system for swap bodies and semi-trailers shall consist only of the following elements, all of which shall be included: owner code: four letters serial number: six numerals check digit: one numeral 4.2 Identif

32、ication of the owner 4.2.1 The identification of the owner of the ILU shall be achieved by using the owner code. The identification of the owner shall be unique and therefore it is necessary for all codes to be registered with the International Union of Combined road rail transport companies (UIRR).

33、 The assigned owner codes will be maintained and checked by UIRR1). 4.2.2 The owner code for ILU shall consist of four capital letters where the last letter also identifies the unit as an ILU and shall consist of one of the five capital letters A, B, D, E or K. 4.2.3 The usage of this owner code is

34、limited to the ILU that are circulating in the European region only. 4.2.4 The following letters as fourth letter of the owner code are reserved for international worldwide use according to EN ISO 6346 and assigned by BIC2): U for all freight containers; J for detachable freight container-related eq

35、uipment; Z for trailers and chassis. 1) UIRR International Union of combined transport companies road rail (www.UIRR.com ; E-mail: ). 2) BIC: Bureau International des Containers et du transport intermodal (www.bic-code.org; E-mail: bicbic-code.org). BS EN 13044-1:2011EN 13044-1:2011 (E) 7 4.3 Serial

36、 number The serial number for a swap body shall consist of six Arabic numerals. If the series of significant numerals does not total six, they shall be preceded by sufficient zeros to make up six numerals. EXAMPLE The series of significant numerals is 1234, the serial number is 001234. 4.4 Check dig

37、it The check digit provides a means of validating the transmission accuracy of the owner code and serial number and shall be determined as in Annex A. The check digit shall validate the owner code and serial number of the ILU. 5 Physical display of marks 5.1 Size and colour of marks The letters and

38、numerals of the owner code, serial number and check digit shall not be less than 100 mm high. All characters shall be of proportionate height and width. They shall be durable and in a colour contrasting with that of the ILU. 5.2 Layout and location of marks 5.2.1 General The requirements of this cla

39、use are applicable particularly to the “closed box“ type of ILU. For other ILU types, all possible practicable steps should be taken to follow the marking layout and location given for the “closed box“ type. NOTE If not practicable to follow the requirements of this clause, the requirements from EN

40、ISO 6346 may be used. 5.2.2 Layout of marks The layout of the owner code serial number and check digit on the ILU shall be one single horizontal line. Where constructional features of the ILU dictate otherwise, the layout may differ from the horizontal. The owner code shall be joined together and sh

41、all be separated from the serial number by at least one character space. The serial number shall be separated from the check digit also by one character space and the check digit shall be displayed in a box. An ILU, having a unique registered identification of its owner “ABCA“ and a serial number “0

42、01234“ and the check digit “2“ shall be marked as in Figure 1: Figure 1 Layout of marks 5.2.3 Location of marks The mandatory identification marks of Clause 3, which are the owner code, check digit, serial number, shall be positioned on the ILU as far as practicable as shown in Figure 2. It shall be

43、 present at least on both side walls and on the roof. Optionally the marks may be presented at the rear end wall (door wall). The mandatory identification marks of Clause 4, which are the owner code, check digit, serial number, shall be positioned on the ILU as far as practicable as shown in Figure

44、2. It shall be present at least on both side walls and on the roof. Optionally the marks may be presented at the front and rear end wall.BS EN 13044-1:2011EN 13044-1:2011 (E) 8 Key 1 end wall 2 right side wall 3 roof 4 rear end wall (door end) 5 left side wall Figure 2 Location of markings BS EN 130

45、44-1:2011EN 13044-1:2011 (E) 9 Annex A (normative) Determination of check digit A.1 General The check digit of the ILU identification system is determined by following the procedure outlined in A.1 to A.5. An example calculation is presented in A.6. A.2 Numerical equivalents of ILU identification sy

46、stem, and serial number Each letter of the owner code and each numeral of the serial number shall be consecutively allocated a numeral value in accordance with Table A.1. A.3 Weighting factor Each numeral equivalent, determined in accordance with Table A.2, shall be multiplied by a weighting factor

47、in the range of 20to 29. The weighting factor 20is applied to the first letter of the owner code, and then in increasing powers of 2, rising to 29 for the last digit of the serial number. A.4 Modulus The sum of the products obtained in accordance with A.3 shall be divided by a modulus of value eleve

48、n. Table A.1 Equivalent values Owner code Serial number Letter Equivalent value Letter Equivalent value Numeral or equivalent value aA 10 N 25 0 B 12 O 26 1 C 13 P 27 2 D 14 Q 28 3 E 15 R 29 4 F 16 S 30 5 G 17 T 31 6 H 18 U 32 7 I 19 V 34 8 J 20 W 35 9 K 21 X 36 L 23 Y 37M 24 Z 38 NOTE The equivalen

49、t values 11, 22 and 33 are omitted as they are multiples of the modulus (see A.3). a Serial number and its equivalent value are identical. A.2 Numerical equivalents of ILU owner code, and serial numberBS EN 13044-1:2011EN 13044-1:2011 (E) 10 A.5 Value of check digit Table A.2 indicates the check digit value corresponding to the remainder value of the division effected in conformity with A.4. Table A.2 Check digit value Remainder Check d