BS EN 13040-2007 Soil improvers and growing media - Sample preparation for chemical and physical tests determination of dry matter content moisture content and laboratory compacted.pdf

《BS EN 13040-2007 Soil improvers and growing media - Sample preparation for chemical and physical tests determination of dry matter content moisture content and laboratory compacted.pdf》由会员分享，可在线阅读，更多相关《BS EN 13040-2007 Soil improvers and growing media - Sample preparation for chemical and physical tests determination of dry matter content moisture content and laboratory compacted.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58c

2、hemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk densityICS 65.080Soil improvers and growing media Sample preparation for BRITISH STANDARDBS EN 13040:2007BS EN 13040:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2008 0

3、2:49, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2008 BSI 2008ISBN 978 0 580 54504 7Amendments/corrigenda issued since publicationDate Commentscontract. Users are responsible for its correct application

4、.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 13040:2007. It supersedes BS EN 13040:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AW/20, To

5、p soil and other growing media.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13040October 2007ICS 65.080 Supersedes EN

6、13040:1999 English VersionSoil improvers and growing media - Sample preparation forchemical and physical tests, determination of dry matter content,moisture content and laboratory compacted bulk densityAmendements organiques et supports de culture -Prparation des chantillons pour les essais physique

7、s etchimiques, dtermination de la teneur en matire sche, dutaux dhumidit et de la masse volumique compacte enlaboratoireBodenverbesserungsmittel und Kultursubstrate -Probenherstellung fr chemische und physikalischeUntersuchungen, Bestimmung des Trockenrckstands, desFeuchtigkeitsgehaltes und der Labo

8、rschttdichteThis European Standard was approved by CEN on 26 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliograp

9、hical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN

10、 member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy

11、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Bru

12、ssels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13040:2007: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:2007 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Norm

13、ative references . 4 3 Terms and definitions. 4 4 Principle . 4 5 Sampling 5 6 Sample reception 5 7 Transportation and storage of samples . 5 8 Preparation of the un-dried test sample. 5 8.1 Sample preparation. 5 8.2 Determination of material exceeding 40 mm . 6 8.3 Test sample passing through a 40

14、mm square aperture sieve 6 8.4 Test sample passing through a 25 mm square aperture sieve 6 8.5 Test sample passing through a 20 mm square aperture sieve 6 9 Preparation of the dried ground (or otherwise size reduced) test sample . 7 9.1 Apparatus 7 9.2 Procedure 7 10 Determination of dry matter cont

15、ent. 7 10.1 Apparatus 7 10.2 Procedure 7 11 Calculation. 8 11.1 Dry matter content 8 11.2 Moisture content . 8 12 Precision - Moisture content 8 13 Test report . 8 Annex A (normative) Determination of laboratory compacted bulk density 10 A.1 General. 10 A.2 Principle . 10 A.3 Apparatus 10 A.4 Proced

16、ure 12 A.5 Expression of results 13 A.6 Use and storage of material. 14 A.7 Precision - Compacted laboratory bulk density 14 A.8 Test report . 14 Annex B (informative) Results of an interlaboratory trial to determine moisture content and laboratory compacted bulk density.15 Bibliography . 17 BS EN 1

17、3040:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:2007 (E) 3 Foreword This document (EN 13040:2007) has been prepared by Technical Committee CEN/TC 223 “Soil improvers and growing media”, the secretariat of which is held by BSI. This

18、 European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. Attention is drawn to the possibility that some of the el

19、ements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13040:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followin

20、g countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni

21、a, Spain, Sweden, Switzerland and the United Kingdom. Safety warning Take care when handling samples that may contain sharps or are of a dusty nature. Samples should be handled with latex gloves and in the case of dusty materials with mask and gloves. BS EN 13040:2007Licensed Copy: Wang Bin, ISO/EXC

22、HANGE CHINA STANDARDS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:2007 (E) 4 1 Scope This European Standard specifies a routine method for preparing a sample of soil improver or growing media prior to chemical analysis and physical testing. The procedures described herein apply only to tho

23、se samples that are supplied to a laboratory in the form in which they will be used for their intended purpose. NOTE 1 This method is not applicable to liming materials and is not suitable for materials like rockwool and foam slabs. NOTE 2 The determination of the laboratory compacted bulk density i

24、s given in Annex A. NOTE 3 The results of an interlaboratory trial to determine moisture content are given in Annex B. NOTE 4 The results of an interlaboratory trial to determine compacted laboratory bulk density are given in Annex B. NOTE 5 Attention is drawn to the possible existence of national l

25、egislation for the declaration of specific products, which could differ from the general requirements of this European Standard. 2 Normative references The following reference documents are indispensable for the application of this European Standard. For dated references, only the edition cited appl

26、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12579:1999, Soil improvers and growing media Sampling ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings 3 Terms and definiti

27、ons For the purposes of this standard, the terms and definitions in EN 12579:1999 and the following apply. 3.1 test sample sample prepared from the laboratory sample and from which test portions will be taken 3.2 test portion quantity of material drawn from the test sample (or from the laboratory sa

28、mple if both are the same) and on which the tests or observations are actually carried out 3.3 laboratory compacted bulk density density, expressed in grams per litre of the material as determined in the laboratory using a 1 l cylinder; the sample being compacted under defined conditions 4 Principle

29、 The laboratory sample is coded and sub-divided to prepare the test sample in such a manner as to be representative of the sample as submitted to the laboratory. The samples intrinsic structure shall be maintained whenever possible. BS EN 13040:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDAR

30、DS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:2007 (E) 5 5 Sampling The laboratory sample shall be obtained in accordance with EN 12579. 6 Sample reception Upon receipt of the laboratory sample, the laboratory shall confirm that the sample relates to the accompanying documentation. The sa

31、mpler shall submit with the sample, at least the following minimum requirements: a) name of the client; b) to whom the results shall be reported if different from a) above; c) place and date the sample was taken; d) name of the sampler; e) discrete sample identification; and f) analysis required. Th

32、e laboratory shall confirm that a sufficient sample has been provided for the analyses to be undertaken by recording the date the sample was received and giving the sample a unique laboratory identification code. This code shall be recorded on all subsequent sub sample containers and on the document

33、ation supplied with the sample. Analysis shall be undertaken within 2 weeks of receipt of the sample. 7 Transportation and storage of samples The laboratory sample shall be transported and stored without compaction or any other treatment which may irreversibly alter its moisture content, particle si

34、ze, packing characteristics or any feature which affects density. A sub-sample or sample of not less than 5 l, as submitted to the laboratory shall be stored so that it shall not undergo any further decomposition, physical damage, hydration or dehydration. Recommended storage should be in a closed p

35、olyethylene bag so that the sample fills the container with no free air at 1 C to 5 C, but not frozen. The storage period depends on several factors including what is the normal custom in the analysing laboratory or country. It is recommended that all such samples should be stored for a minimum of 2

36、8 days from the date of reporting the results to the client. The expected storage period shall be reported to the client at the time the results are reported. 8 Preparation of the un-dried test sample 8.1 Sample preparation Thoroughly mix the laboratory sample, gently breaking any lump or agglomerat

37、e of the sample that has been caused, by, for example, compression during transportation. NOTE Care should be taken to avoid breaking intrinsic parts and to avoid a loss of moisture. If necessary, divide the sample to form sub-samples. Recognized procedures such as coning and quartering shall be use

38、d for sub-sampling. The procedure used shall be included in the report. The size of the final test sample shall be large enough to truly represent the laboratory sample and to BS EN 13040:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:

39、2007 (E) 6 provide sufficient uniform material for all defined physical and chemical tests that are required to be carried out. It is unlikely that a laboratory sample of less than 10 l shall be sufficient for all physical and chemical analyses. During preparation the sample shall not be cut or grou

40、nd. 8.2 Determination of material exceeding 40 mm Weigh approximately 1 000 ml of the test sample (ma) and pass it through a 40 mm square aperture sieve and agitate gently if required. Record the weight (mb) of the amount of sample that does not pass the sieve and express this figure (c) as a fracti

41、on of the total sub-sample mass. This figure is to be reported. bamcm= (1) where mais the mass in grams of the sub-sample; mbis the mass in grams of material retained on a 40 mm square aperture sieve; c is the fraction retained on a 40 mm square aperture sieve. 8.3 Test sample passing through a 40 m

42、m square aperture sieve When 20 % w/w or less of the laboratory sample (8.1) has been retained on the 40 mm sieve, the retained particles shall be physically reduced in equal parts as few times as necessary to permit the entire sample to pass through the sieve. Thoroughly mix the whole sub-sample wi

43、th the broken particles that have been retained on the sieve taking care to minimize physical damage to the sample as a whole. Any observed foreign material such as plastic, metal or glass shall be recorded. Include this observation in the test report (13). 8.4 Test sample passing through a 25 mm sq

44、uare aperture sieve Take approximately 10 l of the test sample (8.1) and pass through a 25 mm sieve. Any particle of the sample 25 mm and /or flexible fibres 80 mm shall be physically reduced in equal parts and as few times as are necessary to be 25 mm and 80 mm for flexible fibres. Thoroughly mix t

45、he whole sub-sample with the broken particles that have been retained on the sieve taking care to minimize physical damage to the sample as a whole. Any observed foreign material such as plastic, metal or glass shall be recorded. Include this observation in the test report (13). NOTE This test sampl

46、e is suitable for physical methods of analyses. 8.5 Test sample passing through a 20 mm square aperture sieve Take about 5 l of test sample (8.3) and using a scoop, pass the material through a 20 mm screen and agitate gently if required. If more than 10 % volume is retained on the screen then the pr

47、ocedure shall be inappropriate to the material under test. If less than 10 % is retained, this material shall be broken down in equal parts and as few times as necessary to permit the entire sample to pass through the sieve. BS EN 13040:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/0

48、7/2008 02:49, Uncontrolled Copy, (c) BSIEN 13040:2007 (E) 7 9 Preparation of the dried ground (or otherwise size reduced) test sample 9.1 Apparatus 9.1.1 Grinding apparatus, able to grind the whole sub-sample without contamination, e.g. cutting mill, ultracentrifuge mill, pestle and mortar. 9.1.2 Sc

49、reen or sieve, of diameter 2 mm round hole in accordance with ISO 565. 9.1.3 Ventilated oven, capable of maintaining a temperature of 75 C 5 C or other means of sample drying 9.2 Procedure Dry a portion of the test sample (8.1) until it crumbles to the touch, using one of the following methods: a) at 75 C 5 C in a ventilated oven; or b) where it is necessary to prevent losses by conventional oven drying methods, freeze drying or milling in the presence of dry ice. It shall be recorded with the results when a technique like the type presented in b