BS EN 13027-2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity《包装 轻型金属包装 由标称容量限定的圆形敞口容器》.pdf

《BS EN 13027-2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity《包装 轻型金属包装 由标称容量限定的圆形敞口容器》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13027-2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity《包装 轻型金属包装 由标称容量限定的圆形敞口容器》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13027:2001 Packaging Light-gauge metal packaging Open-top round cans defined by their nominal gross-lidded capacity The European Standard EN 13027:2001 has the status of a British Standard ICS 55.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 1

2、3027:2001 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 03-2001 ISBN 0 580 36937 4 National foreword This British Standard

3、 is the official English language version of EN 13027:2001. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/22, Metal packaging, which has the responsibility to: A list of organizations represented on this sub

4、committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or

5、by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer im

6、munity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.

7、Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comm

8、entsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN13027 January2001 ICS55.120 Englishversion PackagingLightgaugemetalpackagingOpentopround cansdefinedbytheirnominalgrossliddedcapacity EmballageEmballagesmtalliqueslgersBotesrondes sertiesdfiniesparleurcapacitnominaletotale VerpackungenFeinstblechv

9、erpackungen Falzdeckeldosen,gekennzeichnetdurchderen Gesamtfassungsvermgen ThisEuropeanStandardwasapprovedbyCENon1December2000. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Up

10、todatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownl

11、anguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEA

12、NCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN13027:2001EPage2 EN13027:2001 Contents Page Foreword3 Introductio

13、n .4 1 Scope 5 2 Normativereferences 5 3 Dimensions.5 AnnexA(informative)Recommendeddiametersinrelationtotheirnominalgrossliddedcapacities.7 Bibliography 8Page3 EN13027:2001 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC261“Packaging“,thesecretariatof whichisheldbyAFNOR ThisE

14、uropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyJuly2001,andconflictingnationalstandardsshallbewithdrawnatthelatestby July2001. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing count

15、riesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden, SwitzerlandandtheUnitedKingdom.Page4 EN13027:2001 Introduction Efficientpackagingisofgreatimportanceforthedistri

16、butionandtheprotectionofgoods.Insufficientor inappropriatepackagingcanleadtodamageorwastageofthecontentsofthepack. ItisbaseduponISO10653:1993. RecommendeddiametersrelatedtothisrangeofcapacitiesareshownintheAnnexA(informative)tothis standard.Page5 EN13027:2001 1Scope ThisEuropeanStandardspecifiesther

17、angeofthecapacitiesofthecansdefinedbytheirnominalgrosslidded capacities,theirmetalthicknessnotexceeding0,49mm. Lightgaugeopentopmetalcontainersforliquidproductswithaddedgasdefinedbytheirnominalfillingvolumes arethesubjectofanotherEuropeanstandard. 2 Normativereferences ThisEuropeanStandardincorporat

18、esbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmen

19、torrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). ENISO901 1999 LightgaugemetalcontainersDefinitionsanddeterminationof dimensionsandcapacitiesOpentopcans(ISO901:1997) 3Dimensions Standardisednominalgrossliddedcapacitiesarelistedin table1. TheAnn

20、exAofthisstandardincludesthenominaldiameterslinkedtothesecapacities,thesediametersbeing stronglyrecommendedatEuropeanlevel. WithinthissameAnnexA,arelistedprovisionaladditionalnominaldiameters;itisunderstoodthattheseadditional diameterswillbereviewed,5yearsafterthepublicationofthisstandard,todecideif

21、theyhavetoremaininthis annexortobedeletedtakingintoaccounttheirimportanceinthemarketatthistime. ThetolerancesfornominalgrossliddedcapacitiesaredefinedinENISO901:1999.Page6 EN13027:2001 Table1Listofcapacitiesofopentoproundcansdefinedbytheirnominalgrossliddedcapacity Nominalgrosslidded Capacity ml 71

22、85 106 125 142 170 198 212 314 403 425 446 492 580 636 720 850 1062 1275 1700 1800 2650 3100 4250 10200Page7 EN13027:2001 AnnexA (informative) Recommendeddiametersinrelationtotheirnominalgrossliddedcapacities RecommendeddiametersinrelationtotheirnominalgrossliddedcapacitiesshouldbeasshownintableA.1.

23、 TableA.1Recommendeddiametersinrelationtotheirnominalgrossliddedcapacities Nominal grossliddedcapacity ml Nominaldiameter mm Provisionaladditional nominaldiameters mm 71 5263 55 85 52636573 71,5 106 526365 5571,573 125 5273 71,586 142 526373 5571,5 170 5263738399 5571,586 198 7399 212 6365738399 557

24、1,586 314 657399 403 73 425 738399 6571,586 446 657399 492 73 580 738399 71,5 636 99 720 738399 850 99 71,5 1062 8399 1275 99 1700 99105153 1800 99 2650 3100 153 4250 10200 230 NOTE ThisinformativeannexincludesthediametersrecommendedatEuropeanlevelin relationwiththenominalgrossliddedcapacities.Theli

25、stofthesesizeshasbeensetupfrom ISO10653,thenominaldiameterscomingfromISO1361.Page8 EN13027:2001 Bibliography ISO 10653 1993 LightgaugemetalcontainersRoundopentopcansCans definedbytheirnominalgrossliddedcapacities ISO1361 LightgaugemetalcontainersRoundopentopcansInternal diametersblankBS EN 13027:200

26、1 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standar

27、ds are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using t

28、his British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically rec

29、eive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders fo

30、r international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and

31、 its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developm

32、ents and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists

33、in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any mea

34、ns electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.