BS EN 13026-2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round cylindrical and tapered general use metal containers up to 30 000 ml《包装 轻型金属包装 一般用途.pdf

《BS EN 13026-2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round cylindrical and tapered general use metal containers up to 30 000 ml《包装 轻型金属包装 一般用途.pdf》由会员分享，可在线阅读，更多相关《BS EN 13026-2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round cylindrical and tapered general use metal containers up to 30 000 ml《包装 轻型金属包装 一般用途.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13026:2001 Packaging Light-gauge metal packaging Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml The European Standard EN 13026:2001 has the status of a British Standard ICS 55.120 NO COPYING WITHOUT BSI PERMISSION EX

2、CEPT AS PERMITTED BY COPYRIGHT LAWBS EN 13026:2001 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 03-2001 ISBN 0 580 36936

3、6 National foreword This British Standard is the official English language version of EN 13026:2001. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/22, Metal packaging, which has the responsibility to: A list

4、 of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internati

5、onal Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Brit

6、ish Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European dev

7、elopments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication

8、 Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13026 January 2001 ICS 55.120 English version Packaging Light-gauge metal packaging Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml Emballage Emballages mtalliques

9、lgers Rcipients mtalliques lgers non ronds usage gnral, volumes nominaux de remplissage des rcipients cylindriques et coniques 30 000 ml Verpackungen Feinstblechverpackungen Nennfllvolumina fr nicht runde, zylindrische und konische Metallbehlter fr allgemeine Zwecke mit einem Fassungsvermgen bis zu

10、30 000 ml This European Standard was approved by CEN on 1 December 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra

11、phical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

12、 member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Po

13、rtugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for C

14、EN national Members. Ref. No. EN 13026:2001 EPage 2 EN 13026:2001 BSI 03-2001 ContentsPage Foreword. 3 Introduction 4 1 Scope . 4 2 Nominal filling volumes 4 Annex A (informative) Nominal filling volumes and recommended cross-sections . 5 Bibliography . 9Page 3 EN 13026:2001 BSI 03-2001 Foreword Thi

15、s European Standard has been prepared by Technical Committee CEN/TC 261, Packaging, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2001, and confli

16、cting national standards shall be withdrawn at the latest by July 2001. The recommended cross-sections related to this range of nominal filling volumes are shown informatively in annex A of this Standard. Those cross-sections which are underlined are strongly recommended. The cross-sectional dimensi

17、ons quoted are as defined in ISO 90-2 where for tapered containers, A 1 B 1is the larger dimension and A 2x B 2the smaller. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgi

18、um, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Page 4 EN 13026:2001 BSI 03-2001 Introduction Efficient packaging is of great importance for the distribution and the p

19、rotection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack. 1 Scope This European Standard specifies the range of nominal filling volumes in common use for rectangular, cylindrical and tapered general use containers of up to 30 000 ml nomina

20、l volume, metal thickness not exceeding 0,49 mm nominal. Specifically, this standard relates to flat top rectangular containers for liquid products, i.e. those containers fitted with an aperture suitable for pouring. 2 Nominal filling volumes Nominal filling volumes for non-round, cylindrical and ta

21、pered general use metal containers of up to 30 000 ml shall be as stated in Table 1. Table 1 Nominal filling volumes, cylindrical and tapered cans Nominal Filling Volumes in ml Non-round Cylindrical Non-round Tapered 125 X 250 X 500 X 750 X 1 000 X 2 000 X 2 500 X X 3 000 X X 4 000 X X 5 000 X X 10

22、000 X X 15 000 X X 20 000 X X 25 000 X X 30 000 X The tolerances quoted, 2 mm for dimensions up to 155 mm and 3 mm for dimensions larger than 155 mm, are those permitted in calculating the nominal dimensions. They are intended to cover different container designs rather than manufacturing process va

23、riability.Page 5 EN 13026:2001 BSI 03-2001 Annex A (informative) Nominal filling volumes and recommended cross-sections Nominal filling volumes and recommended cross-sections are shown in Table A1. Those cross-sections which are underlined are strongly recommended. The cross-sectional dimensions quo

24、ted are as defined in ISO 90-2 where for tapered containers, A 1 B 1is the larger dimension and A 2 B 2the smaller. Table A.1 Nominal filling volumes and recommended cross-sections Cross-sections Non-round Tapered Nominal Filling Volumes ml Non-round Cylindrical A 1 B 1 A 2 B 2 125 70 35 54 26 55 33

25、 250 70 35 77 57 500 84 56 90 73 96 42 99 68 106 68 106 76 144 58 750 90 73 106 76 114 58Page 6 EN 13026:2001 BSI 03-2001 Table A.1 Nominal filling volumes and recommended cross-sections (continued) Cross-sections Non-round Tapered Nominal Filling Volumes ml Non-round Cylindrical A 1 B 1 A 2 B 2 1 0

26、00 90 73 99 68 106 68 106 76 110 62 114 47 114 58 120 65 2 000 136 102 147 118 165 93 166 63 166 103 2 500 127 127 130 130 136 102 137 81 147 90 147 118 160 115 165 93Page 7 EN 13026:2001 BSI 03-2001 Table A.1 Nominal filling volumes and recommended cross-sections (continued) Cross-sections Non-roun

27、d Tapered Nominal Filling Volumes ml Non-round Cylindrical A 1 B 1 A 2 B 2 166 63 166 103 164 125 159 120 175 108 179 71 3 000 147 90 147 118 166 103 164 125 159 120 4 000 147 90 147 118 148 148 166 103 175 108 176 119 5 000 160 115 147 118 148 148 164 125 159 120 115 115 166 134 166 103 175 108 176

28、 119 229 96Page 8 EN 13026:2001 BSI 03-2001 Table A.1 Nominal filling volumes and recommended cross-sections (continued) Cross-sections Non-round Tapered Nominal Filling Volumes ml Non-round Cylindrical A 1 B 1 A 2 B 2 10 000 210 140 233 233 231 151 226 146 15 000 233 233 240 240 20 000 233 233 257

29、231 251 225 240 240 246 246 240 240 25 000 240 240 246 246 240 240 257 231 251 225 292 258 286 252 30 000 292 258 286 252 Tolerance shall be as follows: a) 2 mm, dimensions up to 155 mm; b) 3 mm, dimensions larger than 155 mm.Page 9 EN 13026:2001 BSI 03-2001 Bibliography 1 EN 541:1995, Aluminium and

30、 aluminium alloys Rolled products for cans, closures and lids Specifications 2 EN 10202:1989, Cold reduced electrolytic chromium/chromium oxide coated steel 3 EN 10203:1991, Cold reduced electrolytic tinplate 4 ISO 90-2:1997, Light gauge metal containers Definitions and determination of dimensions a

31、nd capacities General use containersBS EN 13026:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incor

32、porated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyo

33、ne finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PL

34、US which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI

35、website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European

36、and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members

37、 of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI websi

38、te at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrie

39、val system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designation

40、s. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.