BS EN 13025-3-2005 Packaging — Light gauge metal containers — Part 3 Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml 25000 ml and.pdf

《BS EN 13025-3-2005 Packaging — Light gauge metal containers — Part 3 Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml 25000 ml and.pdf》由会员分享，可在线阅读，更多相关《BS EN 13025-3-2005 Packaging — Light gauge metal containers — Part 3 Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml 25000 ml and.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 13025-3:2005Packaging Light gauge metal containers Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 mlThe European Standard EN 13025-3:2005 has the status of a British StandardICS 55.140g49g50g3g38

2、g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIBS EN 13025-3:2005This Bri

3、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2006ISBN 0 580 47904 8National forewordThis British Standard is the official English language version of EN 13025-3:2005. Together with BS EN 13025-1:2005 and BS EN 13025-2:2005 it supersedes B

4、S EN 13025:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or

5、 proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement interna

6、tional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport

7、 to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pag

8、es 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments BSI 2006Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEURO

9、PEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13025-3November 2005ICS 55.140 Supersedes EN 13025:2000 English VersionPackaging - Light gauge metal containers - Part 3: Removablehead (open head) round steel and tinplate containers with anominal capacity of 20 000 ml, 25 000 ml and 30 000 mlEmballage

10、- Emballages mtalliques lgers - Partie 3:Seaux ouverture totale dune capacit nominale de 20000 ml, 25 000 ml et 30 000 mlVerpackungen - Feinstblechverpackungen - Teil 3:Deckelfsser mit einem Nennvolumen von 20 000 ml, 25000 ml und 30 000 mlThis European Standard was approved by CEN on 12 September 2

11、005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on

12、 application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat h

13、as the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slov

14、akia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for

15、 CEN national Members.Ref. No. EN 13025-3:2005: ELicensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Dimensions.5 5 Material .5 6 Construction.5 7 Finish 5 B

16、ibliography 8 Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 3 Foreword This European Standard (EN 13025-3:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standar

17、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. This European Standard supersedes EN 13025:2000. According to the CEN/CENELEC

18、Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

19、etherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 4 1 Scope Part 3 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindr

20、ical and tapered removable head containers with steel and tinplate thickness not exceeding 0,49 mm. Recommended dimensions related to this range of nominal filling volumes are shown in Tables 1 and 2 of this European Standard. 2 Normative references The following referenced documents are indispensab

21、le for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10130, Cold rolled low carbon steel flat products for cold forming - Technical delivery conditio

22、ns EN 10131, Cold rolled uncoated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape EN 10202, Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel 3 Terms and definitions For the purpose

23、s of this European Standard, the following terms and definitions apply. 3.1 removable head (open head) container OH cylindrical or tapered packaging made of steel or tinplate, the bottom end of which is permanently fixed to the body and the top end of which can be removed as a lid and is closed by m

24、eans of a closing ring, or alternatively, the top is a multi-lug cover which is closed by crimping to the body 3.2 overall height hoheight of the finished container from base to the highest point (see Figures 1 and 2) 3.3 external diameter demaximum dimension of a container diameter (see Figures 1 a

25、nd 2) 3.4 internal diameter dimaximum internal diameter of the container body shell (see Figures 1 and 2) 3.5 total capacity (gross lidded capacity) volume of water held by the container when filled completely, i.e. following the removal of any air trapped in the container (for the method of measuri

26、ng see EN ISO 90-2) Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 5 3.6 nominal filling volume (nominal capacity) volume of product which the container is required to hold 4 Dimensions The dimensions of removable head (open head) containers

27、with a nominal capacity of 20 l, 25 l and 30 l shall be as given in Tables 1 and 2 and as shown in Figures 1 and 2. In addition the thickness shall not exceed 0,49 mm, with tolerances as specified in EN 10131 (normal tolerances) for steel, and EN 10202 for tinplate. 5 Material The body and ends of t

28、he containers shall be made of steel FePo1 in accordance with EN 10130 or tinplate in accordance with EN 10202. 6 Construction 6.1 The longitudinal seam of the body shall be mechanically seamed or welded. The body and fixed end shall be combined by seaming or other joining methods. NOTE 1 The contai

29、ner body can be tapered or straight-sided and in addition have bead(s) or corrugations and can be necked at the bottom or step sided at the top. NOTE 2 Handle(s) may be fitted. 6.2 The removable lid shall be fitted with a gasket of suitable material, compatible with the contents of the container. NO

30、TE The removable lid can be fitted with an inserted flange type closure in accordance with EN 12928, a flexible plastics spout closure inserted after filling, the aperture for which is in accordance with EN 13029, or other types of closures, if applicable the closure should be fitted with a washer o

31、f suitable material compatible with the contents of the container. The insertion of the closure should be such that its centre line is as close as possible to the vertical. 7 Finish The nature of the internal and external finish shall be appropriate to the physical and chemical requirements of their

32、 intended use. NOTE The nature of the internal and external finish should be agreed between the purchaser and the manufacturer. Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 6 Table 1 Dimensions of straight-sided removable head (open head) r

33、ound containers with a nominal capacity of 20 l, 25 l and 30 l Nominal filling volume Minimum total capacity Internal diameter at the top Maximum external diameter Maximum overall height (di) (de)a(ho) litre litre 2mm mm mm 20 21,0 280 305 305 325 400 332 25 26,2 280 305 305 325 490 395 30 31,0 280

34、305 305 325 580 469 aWithout handles NOTE The dimensions quoted above only concern the preferred volumes 20 l, 25 l and 30 l but other volumes are available. Figure 1 Straight sided removable head (open head) drum Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIE

35、N 13025-3:2005 (E) 7 Table 2 Dimensions of tapered removable head (open head) round containers with a nominal capacity of 20 l, 25 l and 30 l Nominal Filling volume Minimum total capacity Internal diameter at the top Maximum external diameter Maximum overall height (di) (de)a(ho) litre litre 2mm mm

36、mm 20 21,0 280 286 292 305 328 297 306 308 325 354 402 410 370 365 330 25 26,2 280 286 292 305 328 343 306 308 325 354 370 477 455 435 400 30 31,0 305 328 325 354 520 475 aWithout handles NOTE The dimensions quoted above only concern the preferred volumes 20 l, 25 l and 30 l but other volumes are av

37、ailable. Figure 2 Tapered removable head (open head) drum Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-3:2005 (E) 8 Bibliography 1 EN ISO 90-2, Light gauge metal containers. Definitions and determination of dimensions and capacities Part 2: General us

38、e containers (ISO 90-2:1997) 2 EN 12928, Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l 3 EN 13029, Packaging Light-gauge metal packaging Apertures for plug-in plastic closures 4 EN 13025-1, Packaging - Light gauge metal containers - Part 1: Nominal filli

39、ng volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml Licensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Mon May 15 08:37:33 BST 2006, Uncontrolled Copy, (c) BSIBS EN 13025-3:2005BSI389 Chiswick

40、High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendme

41、nt or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would

42、 inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest

43、 editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response

44、 to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its

45、Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are

46、kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access t

47、o British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardizati

48、on bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the

49、 free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Mon May