BS EN 12858-1999 Paper - Printing and business paper - Requirements for continuous stationery《纸张 打印纸和办公用纸 纸带的要求》.pdf

《BS EN 12858-1999 Paper - Printing and business paper - Requirements for continuous stationery《纸张 打印纸和办公用纸 纸带的要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12858-1999 Paper - Printing and business paper - Requirements for continuous stationery《纸张 打印纸和办公用纸 纸带的要求》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12858:1999 The Euro

2、pean Standard EN 12858:1999 has the status of a British Standard ICS 85.080 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Paper Printing and business paper Requirements for continuous stationeryThis British Standard, having been prepared under the direction of the Sector Com

3、mittee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 October 1999 BSI 10-1999 ISBN 0 580 32968 2 BS EN 12858:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard is the English

4、language version of EN 12858:1999. The UK participation in its preparation was entrusted to Technical Committee PAI/24, Business forms, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposa

5、ls for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internat

6、ional or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include

7、 all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN t

8、itle page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de

9、Stassart 36, B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12858:1999 E EUROPEAN STANDARD EN 12858 NORME EUROPE ENNE EUROPA ISCHE NORM April 1999 ICS 85.080 English version Paper Printing and business paper R

10、equirements for continuous stationery Papier Papier dimpression et de bureau Spe cifications pour papier en continu Papier Druck- und Bu ropapier Anforderungen an Endlospapier This European Standard was approved by CEN on 26 March 1999. CEN members are bound to comply with the CEN/CENELEC Internal R

11、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. Thi

12、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are th

13、e national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 12858:1999 BSI 10-1999 Foreword This European Standard has been prep

14、ared by Technical Committee CEN/TC 172, Pulp, paper and board, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1999, and conflicting national stand

15、ards shall be withdrawn at the latest by October 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Icelan

16、d, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Requirements 3 4 Sampling and conditioning 4 5 Packaging 4 6 Attainment of thermal equilibrium between storage area and print

17、ing room 4Page 3 EN 12858:1999 BSI 10-1999 Table 1 Physical characteristics on continuous stationery Property Unit Values Test method grammage g/m 2 40 to 59, tolerance 4% 60 to 90, tolerance 3% EN ISO 536 tensile index MD Nm/g $ 50 for# 49 g/m 2 $ 45 for$ 50 g/m 2 EN ISO 1924-2 Bendtsen Roughness m

18、l/min 150 to max. 500 1) ISO 8791-2 moisture content % 5,0 to 6 5 wood free 5,5 to 7,5 wood containing EN 20287 relative humidity 2) inside the packaging %4 0 t o 5 5 at 198Ct o2 38 C opacity % min. 63 at 40 g/m 2 min. 67 at 45 g/m 2 min. 70 at 50 g/m 2 min. 75 at 60 g/m 2 min. 80 at 70 g/m 2 to 90

19、g/m 2 ISO 2471 reflectance respectively ISO brightness % 3) ISO 2469 respectively ISO/DIS 2470 stiffness 3) 3) static bending ISO 2493 resonance method ISO 5629 1) Where MG Glazed or Super Calendered papers are supplied, the Bendtsen Roughness figures shall not apply. 2) Relative humidity is for gui

20、dance only and the figures are not to be adhered to if this contradicts the moisture content specification (due to influence of furnish and/or filler type and content). 3) Specification to be agreed between customer and supplier. NOTE Grammage above 90 g/m 2 is by agreement between customer and supp

21、lier providing it meets the other requirements of this European Standard. 1 Scope This European Standard specifies requirements for uncoated paper, for reel fed conversion and/or printing of continuous stationery into continuous forms. It does not include specific requirements for non-impact printin

22、g, which shall be agreed between supplier and customer. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter.

23、For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN ISO 186, Paper and board Sampling to de

24、termine average quality. (ISO 186:1994) EN ISO 536, Paper and board Determination of grammage. (ISO 536:1995) EN ISO 1924-2, Paper and board Determination of tensile properties Part 2: Constant rate of elongation method. (ISO 1924-2:1994) EN 20187, Paper, board and pulps Standard atmosphere for cond

25、itioning and testing and procedure for monitoring the atmosphere and conditioning of samples. (ISO 187:1990) EN 20287, Paper and board Determination of moisture content Oven-drying method. (ISO 287:1985) ISO 2469, Paper, board and pulps Measurement of diffuse reflectance factor. ISO/DIS 2470, Paper,

26、 board and pulps Measurement of diffuse blue reflectance factor (ISO brightness). ISO 2471, Paper and board Determination of opacity (paper backing) Diffuse reflectance method. ISO 2493, Paper and board Determination of resistance to bending. ISO 5629, Paper and board Determination of bending stiffn

27、ess Resonance method. ISO 8791-2, Paper and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen method. 3 Requirements 3.1 Physical characteristics The physical characteristics are given in Table 1.Page 4 EN 12858:1999 BSI 10-1999 Table 2 Time for adjustment of thermal eq

28、uilibrium Paper quantity Temperature difference between storage area and printing room 58C1 0 8 C2 0 8 C3 0 8 C3 5 8 C m 3 kg Time for adjustment in hours 0,4 320 9 17 36 64 92 0,6 480 10 20 42 76 106 1,0 800 11 23 46 84 115 3.2 Reel width The width of the reel shall be within 1 mm of the ordered re

29、el width, measured on the reel at the top. 3.3 Reel joins All joins shall be clearly marked on the face of the reel. The following limits shall be for joins within a single reel: diameter 700 mm, no more than 1 join; diameter$ 700 mm, no more than 2 joins. Where required the percentage of join free

30、reels within an order shall be agreed between customer and supplier. 3.4 Surface and edge debris The paper shall be essentially free from dust, loose fibres and debris. 4 Sampling and conditioning The samples shall be taken in accordance with EN ISO 186. The samples from which the specimen will be t

31、aken shall be conditioned in accordance with EN 20187 and all the physical properties given in Table 1, except moisture content, shall be determined at those same conditions. Moisture content shall be tested directly on the paper as supplied. 5 Packaging 5.1 Reels All reels leaving the paper mill sh

32、all be fully protected against fluctuations in weather conditions and the reels should remain in their protective packaging until they are to be used. Before processing the wrapped reels shall be stored in an area sharing the same atmospheric conditions as the processing equipment to allow them to r

33、each temperature equilibrium. 5.2 Converted forms The converted forms shall be packed to protect paper from harmful effects of mechanical forces, atmospheric conditions and contamination. The boxes or reels shall be stored out of direct sunlight, away from components of heating systems and not direc

34、tly on the floor. 6 Attainment of thermal equilibrium between storage area and printing room Before the paper is used in the printing room thermal equilibrium shall be attained. The required time for this depends upon the quantity of paper involved and the atmospheric conditions (see Table 2).blankB

35、S EN 12858:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

36、 | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or r

37、evision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would infor

38、m the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of stan

39、dards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been

40、published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also availa

41、ble which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and o

42、ther benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs an

43、d Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of nec

44、essary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.